[Pkg-hpijs-devel] Bug#696464: hp 1020 debian 7 failed
Alexey Kuznetsov
kuznetsov.alexey at gmail.com
Sat Dec 22 14:50:30 UTC 2012
root at mini:/home/axet# sudo hp-plugin -i
HP Linux Imaging and Printing System (ver. 3.12.6)
Plugin Download and Install Utility ver. 2.1
Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: PolicyKit support requires DBUS or PolicyKit support files missing
(Note: Defaults for each question are maked with a '*'. Press <enter> to
accept the default.)
\
-----------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.12.6 |
-----------------------------------------
Option Description
---------- --------------------------------------------------
d Download plug-in from HP (recomended)
p Specify a path to the plug-in (advanced)
q Quit hp-plugin (skip installation)
Enter option (d=download*, p=specify path, q=quit) ?
--------------------------
| DOWNLOAD CONFIGURATION |
--------------------------
Checking for network connection...
Downloading configuration file from: http://hplip.sf.net/plugin.conf
Downloading configuration: [\ ] 0%
-------------------
| DOWNLOAD PLUGIN |
-------------------
Checking for network connection...
Downloading plug-in from:
http://www.openprinting.org/download/printdriver/auxfiles/HP/plugins/hplip-3.12.6-plugin.run
Downloading plug-in: [\ ] 0% Receiving
digital keys: /usr/bin/gpg --no-permission-warning --keyserver
pgp.mit.edu--recv-keys 0xA59047B9
----------------------
| INSTALLING PLUG-IN |
----------------------
Verifying archive integrity... All good.
Uncompressing HPLIP 3.12.6 Plugin Self Extracting
Archive.......................................................
HP Linux Imaging and Printing System (ver. 3.12.6)
Plugin Installer ver. 3.0
Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Plug-in version: 3.12.6
Installed HPLIP version: 3.12.6
Number of files to install: 50
You must agree to the license terms before installing the plug-in:
LICENSE TERMS FOR HP Linux Imaging and Printing (HPLIP) Driver Plug-in
These License Terms govern your Use of the HPLIP Driver Plug-in Software
(the "Software"). USE OF THE SOFTWARE INCLUDING, WITHOUT LIMITATION, ANY
DOCUMENTATION, IS SUBJECT TO THESE LICENSE TERMS AND THE APPLICABLE AS-IS
WARRANTY
STATEMENT. BY DOWNLOADING AND INSTALLING THE SOFTWARE, YOU ARE AGREEING TO
BE BOUND BY THESE TERMS. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, DO NOT
DOWNLOAD AND INSTALL THE SOFTWARE ON YOUR SYSTEM.
1. License Grant. HP grants you a license to Use one copy of the Software
with HP printing products only. "Use" includes using, storing, loading,
installing, executing, and displaying the Software. You may not modify the
Software or
disable any licensing or control features of the Software.
2. Ownership. The Software is owned and copyrighted by HP or its third
party suppliers. Your license confers no title to, or ownership in, the
Software and is not a sale of any rights in the Software. HP's third party
suppliers may
protect their rights in the Software in the event of any violation of these
license terms.
3. Copies and Adaptations. You may only make copies or adaptations of the
Software for archival purposes or when copying or adaptation is an
essential step in the authorized Use of the Software. You must reproduce
all copyright notices
in the original Software on all copies or adaptations. You may not copy the
Software onto any public network.
4. No Disassembly. You may not Disassemble the Software unless HP's prior
written consent is obtained. "Disassemble" includes disassembling,
decompiling, decrypting, and reverse engineering. In some jurisdictions,
HP's consent may not
be required for limited Disassembly. Upon request, you will provide HP with
reasonably detailed information regarding any Disassembly.
5. No Transfer. You may not assign, sublicense or otherwise transfer all or
any part of these License Terms or the Software.
6. Termination. HP may terminate your license, upon notice, for failure to
comply with any of these License Terms. Upon termination, you must
immediately destroy the Software, together with all copies, adaptations and
merged portions in
any form.
7. Export Requirements. You may not export or re-export the Software or any
copy or adaptation in violation of any applicable laws or regulations.
8. U.S. Government Restricted Rights. The Software has been developed
entirely at private expense. It is delivered and licensed, as defined in
any applicable DFARS, FARS, or other equivalent federal agency regulation
or contract clause,
as either "commercial computer software" or "restricted computer software",
whichever is applicable. You have only those rights provided for such
Software by the applicable clause or regulation or by these License Terms.
9. DISCLAIMER OF WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, HP AND ITS SUPPLIERS PROVIDE THE SOFTWARE "AS IS" AND WITH ALL FAULTS,
AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS,
IMPLIED, OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF TITLE AND
NON-INFRINGEMENT, ANY IMPLIED WARRANTIES, DUTIES OR CONDITIONS OF
MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE, AND OF LACK OF
VIRUSES ALL WITH REGARD TO THE
SOFTWARE. Some states/jurisdictions do not allow exclusion of implied
warranties or limitations on the duration of implied warranties, so the
above disclaimer may not apply to you in its entirety.
10. LIMITATION OF LIABILITY. Notwithstanding any damages that you might
incur, the entire liability of HP and any of its suppliers under any
provision of this agreement and your exclusive remedy for all of the
foregoing shall be limited
to the greater of the amount actually paid by you separately for the
Software or U.S. $5.00. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO EVENT SHALL HP OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL,
INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED
TO, DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR
BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY ARISING OUT
OF OR IN ANY
WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE, OR OTHERWISE IN
CONNECTION WITH ANY PROVISION OF THIS AGREEMENT, EVEN IF HP OR ANY SUPPLIER
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND EVEN IF THE REMEDY
FAILS OF
ITS ESSENTIAL PURPOSE. Some states/jurisdictions do not allow the exclusion
or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ?
Done.
------------------------
| DOWNLOADING FIRMWARE |
------------------------
Downloading firmware to device hp:/usb/HP_LaserJet_1020?serial=JL2NBET...
Firmware download successful.
Done.
root at mini:/home/axet#
-- AK
On 22 December 2012 18:26, Bastien ROUCARIES <roucaries.bastien at gmail.com>wrote:
> It seems you printer need a firmware in order to print.
>
> try to run as root hp-plugin and if it work please report here
>
>
> On Sat, Dec 22, 2012 at 3:14 PM, Bastien ROUCARIES
> <roucaries.bastien at gmail.com> wrote:
> > On Sat, Dec 22, 2012 at 2:50 PM, Alexey Kuznetsov
> > <kuznetsov.alexey at gmail.com> wrote:
> >> - the section CUPS web interface
> >>
> >> nothing special on the web interface. usual printer. no error messages.
> >> printer on idle state. everyting seems ok.
> >>
> >> - the section CUPS error_log
> >>
> >> i already provide this information 2) on my previous message
> >
> > Thanks
> >
> > The error is here:
> > D [21/Dec/2012:18:06:56 +0400] [Job 110] prnt/hpcups/HPCupsFilter.cpp
> > 443: m_Job initialization failed with error = 48DEBUG: Read 16 bytes
> > of print data...
> >
> >
> >
> >
> >> -- AK
> >>
> >>
> >> On 22 December 2012 16:35, Bastien ROUCARIES <
> roucaries.bastien at gmail.com>
> >> wrote:
> >>>
> >>> thanks it is better.
> >>>
> >>> Could you try:
> >>> - the section CUPS web interface ?
> >>> - the section CUPS error_log ?
> >>>
> >>> And explain what you do, before posting some stuff (like you do for usb
> >>> section)
> >>>
> >>> On Sat, Dec 22, 2012 at 8:58 AM, Alexey Kuznetsov
> >>> <kuznetsov.alexey at gmail.com> wrote:
> >>> > Sorry, I'm not man of the words. Please lead me on information I
> should
> >>> > provide.
> >>> >
> >>> > 1) I did all steps described on wiki page, expect Ubuntu related, as
> I
> >>> > though. Or you mean all steps on USB section? I ll do it.
> >>> >
> >>> > 2) I have USB printer.
> >>> >
> >>> >
> http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=439428&lang=en&cc=uk&prodTypeId=18972&prodSeriesId=439423&taskId
> >>> >
> >>> > 3) When I had Debian 6, everying works ok. I abbe to print locally
> and
> >>> > througth network using CUPS drivers. Debian 7 gives me no result.
> When I
> >>> > add
> >>> > print job, it stuck in the queue forever. Noting comes out from
> printer.
> >>> > And
> >>> > job appears stopped.
> >>> >
> >>> > 4) My server is PPC machine.
> >>> >
> >>> > ###
> >>> >
> >>> > 1)
> >>> >
> >>> > axet at mini:~$ lsmod | grep usb
> >>> > usblp 13115 0
> >>> > usbhid 36507 0
> >>> > usb_storage 40099 1
> >>> > hid 72395 1 usbhid
> >>> > usbcore 130469 7
> >>> > ehci_hcd,ohci_hcd,uas,usb_storage,usbhid,usblp
> >>> > usb_common 4034 1 usbcore
> >>> > axet at mini:~$
> >>> >
> >>> > 2)
> >>> >
> >>> > Dec 22 11:25:54 mini kernel: [29872.281571] usb 1-1.1: new high-speed
> >>> > USB
> >>> > device number 12 using ehci_hcd
> >>> > Dec 22 11:25:54 mini kernel: [29872.374282] usb 1-1.1: New USB device
> >>> > found,
> >>> > idVendor=03f0, idProduct=2b17
> >>> > Dec 22 11:25:54 mini kernel: [29872.374293] usb 1-1.1: New USB device
> >>> > strings: Mfr=1, Product=2, SerialNumber=3
> >>> > Dec 22 11:25:54 mini kernel: [29872.374299] usb 1-1.1: Product: HP
> >>> > LaserJet
> >>> > 1020
> >>> > Dec 22 11:25:54 mini kernel: [29872.374303] usb 1-1.1: Manufacturer:
> >>> > Hewlett-Packard
> >>> > Dec 22 11:25:54 mini kernel: [29872.374307] usb 1-1.1: SerialNumber:
> >>> > JL2NBET
> >>> > Dec 22 11:25:54 mini kernel: [29872.377128] usblp0: USB Bidirectional
> >>> > printer dev 12 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
> >>> > Dec 22 11:25:54 mini mtp-probe: checking bus 1, device 12:
> >>> > "/sys/devices/pci0001:10/0001:10:1b.2/usb1/1-1/1-1.1"
> >>> > Dec 22 11:25:54 mini mtp-probe: bus: 1, device: 12 was not an MTP
> device
> >>> > Dec 22 11:25:54 mini logger: loading hp_laserjet_1020 firmware 001
> 012
> >>> > Dec 22 11:25:54 mini kernel: [29872.592376] usb 1-1.2: USB
> disconnect,
> >>> > device number 11
> >>> > Dec 22 11:25:54 mini kernel: [29872.797258] usb 1-1.2: new high-speed
> >>> > USB
> >>> > device number 13 using ehci_hcd
> >>> > Dec 22 11:25:55 mini kernel: [29872.890096] usb 1-1.2: New USB device
> >>> > found,
> >>> > idVendor=1058, idProduct=1100
> >>> > Dec 22 11:25:55 mini kernel: [29872.890107] usb 1-1.2: New USB device
> >>> > strings: Mfr=1, Product=2, SerialNumber=3
> >>> > Dec 22 11:25:55 mini kernel: [29872.890113] usb 1-1.2: Product: My
> Book
> >>> > Dec 22 11:25:55 mini kernel: [29872.890117] usb 1-1.2: Manufacturer:
> >>> > Western
> >>> > Digital
> >>> > Dec 22 11:25:55 mini kernel: [29872.890122] usb 1-1.2: SerialNumber:
> >>> > 57442D574341534E30303431303733
> >>> > Dec 22 11:25:55 mini kernel: [29872.891845] scsi6 : usb-storage
> >>> > 1-1.2:1.0
> >>> > Dec 22 11:25:55 mini mtp-probe: checking bus 1, device 13:
> >>> > "/sys/devices/pci0001:10/0001:10:1b.2/usb1/1-1/1-1.2"
> >>> > Dec 22 11:25:55 mini mtp-probe: bus: 1, device: 13 was not an MTP
> device
> >>> > Dec 22 11:25:56 mini kernel: [29873.889632] scsi 6:0:0:0:
> Direct-Access
> >>> > WD 7500AAC External 1.65 PQ: 0 ANSI: 4
> >>> > Dec 22 11:25:56 mini kernel: [29873.894127] sd 6:0:0:0: Attached scsi
> >>> > generic sg2 type 0
> >>> > Dec 22 11:25:56 mini kernel: [29873.894344] sd 6:0:0:0: [sdc]
> 1465149168
> >>> > 512-byte logical blocks: (750 GB/698 GiB)
> >>> > Dec 22 11:25:56 mini kernel: [29873.895206] sd 6:0:0:0: [sdc] Write
> >>> > Protect
> >>> > is off
> >>> > Dec 22 11:25:56 mini kernel: [29873.895217] sd 6:0:0:0: [sdc] Mode
> >>> > Sense: 21
> >>> > 00 00 00
> >>> > Dec 22 11:25:56 mini kernel: [29873.896080] sd 6:0:0:0: [sdc] No
> Caching
> >>> > mode page present
> >>> > Dec 22 11:25:56 mini kernel: [29873.896091] sd 6:0:0:0: [sdc]
> Assuming
> >>> > drive
> >>> > cache: write through
> >>> > Dec 22 11:25:56 mini kernel: [29873.900557] sd 6:0:0:0: [sdc] No
> Caching
> >>> > mode page present
> >>> > Dec 22 11:25:56 mini kernel: [29873.900571] sd 6:0:0:0: [sdc]
> Assuming
> >>> > drive
> >>> > cache: write through
> >>> > Dec 22 11:25:56 mini kernel: [29873.901227] sdc: sdc1
> >>> > Dec 22 11:25:56 mini kernel: [29873.910288] sd 6:0:0:0: [sdc] No
> Caching
> >>> > mode page present
> >>> > Dec 22 11:25:56 mini kernel: [29873.910302] sd 6:0:0:0: [sdc]
> Assuming
> >>> > drive
> >>> > cache: write through
> >>> > Dec 22 11:25:56 mini kernel: [29873.910309] sd 6:0:0:0: [sdc]
> Attached
> >>> > SCSI
> >>> > disk
> >>> > Dec 22 11:25:57 mini /usr/sbin/hplj1020: foo2zjs: HP LaserJet 1020
> >>> > firmware
> >>> > already loaded into /dev/usb/lp0
> >>> > Dec 22 11:25:57 mini udev-configure-printer: add
> >>> > /devices/pci0001:10/0001:10:1b.2/usb1/1-1/1-1.1/1-1.1:1.0
> >>> > Dec 22 11:25:57 mini udev-configure-printer: device devpath is
> >>> > /devices/pci0001:10/0001:10:1b.2/usb1/1-1/1-1.1
> >>> > Dec 22 11:25:57 mini udev-configure-printer: Device vendor/product is
> >>> > 03F0:2B17
> >>> > Dec 22 11:25:57 mini udev-configure-printer: add
> >>> > /devices/pci0001:10/0001:10:1b.2/usb1/1-1/1-1.1/1-1.1:1.0/usb/lp0
> >>> > Dec 22 11:25:57 mini kernel: [29875.483727] usb 2-1: new full-speed
> USB
> >>> > device number 26 using ohci_hcd
> >>> > Dec 22 11:25:57 mini kernel: [29875.623630] usb 2-1: device
> descriptor
> >>> > read/64, error -62
> >>> > Dec 22 11:25:58 mini kernel: [29875.867491] usb 2-1: device
> descriptor
> >>> > read/64, error -62
> >>> > Dec 22 11:25:58 mini kernel: [29876.107373] usb 2-1: new full-speed
> USB
> >>> > device number 27 using ohci_hcd
> >>> > Dec 22 11:25:58 mini kernel: [29876.247315] usb 2-1: device
> descriptor
> >>> > read/64, error -62
> >>> > Dec 22 11:25:58 mini kernel: [29876.491190] usb 2-1: device
> descriptor
> >>> > read/64, error -62
> >>> > Dec 22 11:25:58 mini kernel: [29876.731075] usb 2-1: new full-speed
> USB
> >>> > device number 28 using ohci_hcd
> >>> > Dec 22 11:25:59 mini kernel: [29877.138864] usb 2-1: device not
> >>> > accepting
> >>> > address 28, error -62
> >>> > Dec 22 11:25:59 mini kernel: [29877.274791] usb 2-1: new full-speed
> USB
> >>> > device number 29 using ohci_hcd
> >>> > Dec 22 11:25:59 mini kernel: [29877.682588] usb 2-1: device not
> >>> > accepting
> >>> > address 29, error -62
> >>> > Dec 22 11:25:59 mini kernel: [29877.682639] hub 2-0:1.0: unable to
> >>> > enumerate
> >>> > USB device on port 1
> >>> > Dec 22 11:25:59 mini udev-configure-printer: failed to claim
> interface
> >>> > Dec 22 11:25:59 mini udev-configure-printer: device devpath is
> >>> > /devices/pci0001:10/0001:10:1b.2/usb1/1-1/1-1.1
> >>> > Dec 22 11:25:59 mini udev-configure-printer: MFG:Hewlett-Packard
> MDL:HP
> >>> > LaserJet 1020 SERN:- serial:JL2NBET
> >>> > Dec 22 11:26:00 mini /usr/sbin/hplj1020: foo2zjs: HP LaserJet 1020
> >>> > firmware
> >>> > already loaded into /dev/usb/lp0
> >>> > Dec 22 11:26:00 mini kernel: [29878.766132] usblp0: removed
> >>> > Dec 22 11:26:00 mini kernel: [29878.769956] usblp0: USB Bidirectional
> >>> > printer dev 12 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
> >>> > Dec 22 11:26:00 mini udev-configure-printer: URI contains USB serial
> >>> > number
> >>> > Dec 22 11:26:00 mini udev-configure-printer: URI match:
> >>> > usb://HP/LaserJet%201020?serial=JL2NBET
> >>> > Dec 22 11:26:00 mini udev-configure-printer: Consider also queues
> with
> >>> > "/usb/lp0" or "/usblp0" in their URIs as matching
> >>> > Dec 22 11:26:00 mini udev-configure-printer: URI of print queue:
> >>> > usb://HP/LaserJet%201020?serial=JL2NBET, normalized: laserjet 1020
> >>> > serial
> >>> > jl2nbet
> >>> > Dec 22 11:26:00 mini udev-configure-printer: URI of detected printer:
> >>> > usb://HP/LaserJet%201020?serial=JL2NBET, normalized: laserjet 1020
> >>> > serial
> >>> > jl2nbet
> >>> > Dec 22 11:26:00 mini udev-configure-printer: Queue
> >>> > ipp://localhost:631/printers/Hewlett-Packard-HP-LaserJet-1020 has
> >>> > matching
> >>> > device URI
> >>> > Dec 22 11:26:00 mini udev-configure-printer: Re-enabled printer
> >>> > ipp://localhost:631/printers/Hewlett-Packard-HP-LaserJet-1020
> >>> > Dec 22 11:26:01 mini udev-configure-printer: add
> >>> > /devices/pci0001:10/0001:10:1b.2/usb1/1-1/1-1.1/1-1.1:1.0/usb/lp0
> >>> > Dec 22 11:26:01 mini udev-configure-printer: device devpath is
> >>> > /devices/pci0001:10/0001:10:1b.2/usb1/1-1/1-1.1
> >>> > Dec 22 11:26:01 mini udev-configure-printer: Device already handled
> >>> > Dec 22 11:26:02 mini colord-sane: io/hpmud/musb.c 2066: Invalid
> >>> > usb_open:
> >>> > Permission denied
> >>> > Dec 22 11:26:04 mini /usr/sbin/hplj1020: foo2zjs: HP LaserJet 1020
> >>> > firmware
> >>> > already loaded into /dev/usb/lp0
> >>> > Dec 22 11:26:06 mini kernel: [29884.479195] usb 2-1: new full-speed
> USB
> >>> > device number 30 using ohci_hcd
> >>> > Dec 22 11:26:06 mini kernel: [29884.619126] usb 2-1: device
> descriptor
> >>> > read/64, error -62
> >>> > Dec 22 11:26:07 mini kernel: [29884.864468] usb 2-1: device
> descriptor
> >>> > read/64, error -62
> >>> > Dec 22 11:26:07 mini kernel: [29885.102868] usb 2-1: new full-speed
> USB
> >>> > device number 31 using ohci_hcd
> >>> > Dec 22 11:26:07 mini kernel: [29885.242800] usb 2-1: device
> descriptor
> >>> > read/64, error -62
> >>> > Dec 22 11:26:07 mini kernel: [29885.486689] usb 2-1: device
> descriptor
> >>> > read/64, error -62
> >>> > Dec 22 11:26:07 mini kernel: [29885.726565] usb 2-1: new full-speed
> USB
> >>> > device number 32 using ohci_hcd
> >>> > Dec 22 11:26:08 mini kernel: [29886.134353] usb 2-1: device not
> >>> > accepting
> >>> > address 32, error -62
> >>> > Dec 22 11:26:08 mini kernel: [29886.270289] usb 2-1: new full-speed
> USB
> >>> > device number 33 using ohci_hcd
> >>> > Dec 22 11:26:08 mini kernel: [29886.678088] usb 2-1: device not
> >>> > accepting
> >>> > address 33, error -62
> >>> > Dec 22 11:26:08 mini kernel: [29886.678138] hub 2-0:1.0: unable to
> >>> > enumerate
> >>> > USB device on port 1
> >>> > Dec 22 11:26:11 mini colord-sane: io/hpmud/musb.c 2066: Invalid
> >>> > usb_open:
> >>> > Permission denied
> >>> >
> >>> >
> >>> > 3)
> >>> >
> >>> > root at mini:/home/axet# lsusb
> >>> > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> >>> > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> >>> > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> >>> > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> >>> > Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port
> HUB
> >>> > Bus 001 Device 013: ID 1058:1100 Western Digital Technologies, Inc.
> >>> > Bus 001 Device 005: ID 04d9:1702 Holtek Semiconductor, Inc.
> >>> > Bus 001 Device 012: ID 03f0:2b17 Hewlett-Packard LaserJet 1020
> >>> > root at mini:/home/axet#
> >>> >
> >>> > 4)
> >>> >
> >>> > root at mini:/home/axet# ls -l /dev/usb/
> >>> > total 0
> >>> > crw-rw-rw- 1 root lp 180, 0 Dec 22 11:26 lp0
> >>> > root at mini:/home/axet#
> >>> >
> >>> > 5)
> >>> >
> >>> > root at mini:/home/axet# usb_printerid /dev/usb/lp0
> >>> > GET_DEVICE_ID string:
> >>> > MFG:Hewlett-Packard;MDL:HP LaserJet 1020;CMD:ACL;CLS:PRINTER;DES:HP
> >>> > LaserJet
> >>> > 1020;FWVER:20080222;
> >>> > root at mini:/home/axet#
> >>> >
> >>> >
> >>> > 6) after this point i install printer drive hplip. so hp-info - i can
> >>> > see my
> >>> > printer
> >>> >
> >>> > axet at mini:~$ hp-info -i
> >>> >
> >>> > HP Linux Imaging and Printing System (ver. 3.12.6)
> >>> > Device Information Utility ver. 5.2
> >>> >
> >>> > Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
> >>> > This software comes with ABSOLUTELY NO WARRANTY.
> >>> > This is free software, and you are welcome to distribute it
> >>> > under certain conditions. See COPYING file for more details.
> >>> >
> >>> > Using device: hp:/usb/HP_LaserJet_1020?serial=JL2NBET
> >>> >
> >>> > error: Unable to connect to dbus session bus.
> >>> >
> >>> > hp:/usb/HP_LaserJet_1020?serial=JL2NBET
> >>> >
> >>> > Device Parameters (dynamic data):
> >>> > Parameter Value(s)
> >>> > ----------------------------
> >>> > ----------------------------------------------------------
> >>> > agent1-ack False
> >>> > agent1-desc Black toner cartridge
> >>> > agent1-dvc 0
> >>> > agent1-health 0
> >>> > agent1-health-desc Good/OK
> >>> > agent1-hp-ink False
> >>> > agent1-id 0
> >>> > agent1-kind 4
> >>> > agent1-known False
> >>> > agent1-level 100
> >>> > agent1-level-trigger 0
> >>> > agent1-sku Q2612A
> >>> > agent1-type 1
> >>> > agent1-virgin False
> >>> > back-end hp
> >>> > cups-printers ['Hewlett-Packard-HP-LaserJet-1020']
> >>> > cups-uri
> hp:/usb/HP_LaserJet_1020?serial=JL2NBET
> >>> > dev-file
> >>> > device-state 1
> >>> > device-uri
> hp:/usb/HP_LaserJet_1020?serial=JL2NBET
> >>> > deviceid MFG:Hewlett-Packard;MDL:HP LaserJet
> >>> > 1020;CMD:ACL;CLS:PRINTER;DES:HP
> LaserJet
> >>> > 1020;FWVER:20080222;
> >>> > duplexer 0
> >>> > error-state 0
> >>> > host
> >>> > in-tray1 1
> >>> > in-tray2 1
> >>> > is-hp True
> >>> > media-path 1
> >>> > panel 0
> >>> > panel-line1
> >>> > panel-line2
> >>> > photo-tray 0
> >>> > port 1
> >>> > r 0
> >>> > revision 254
> >>> > rg 000
> >>> > rr 000000
> >>> > rs 000000000
> >>> > serial JL2NBET
> >>> > status-code 1000
> >>> > status-desc Idle
> >>> > supply-door 1
> >>> > top-door 1
> >>> >
> >>> > Model Parameters (static data):
> >>> > Parameter Value(s)
> >>> > ----------------------------
> >>> > ----------------------------------------------------------
> >>> > align-type 0
> >>> > clean-type 0
> >>> > color-cal-type 0
> >>> > copy-type 0
> >>> > embedded-server-type 0
> >>> > fax-type 0
> >>> > fw-download True
> >>> > icon HP_LaserJet_1012.png
> >>> > io-mfp-mode 6
> >>> > io-mode 1
> >>> > io-support 2
> >>> > job-storage 0
> >>> > linefeed-cal-type 0
> >>> > model HP_LaserJet_1020
> >>> > model-ui HP LaserJet 1020
> >>> > model1 HP LaserJet 1020 Printer
> >>> > model2 HP LaserJet 1020 Plus Printer
> >>> > monitor-type 0
> >>> > panel-check-type 0
> >>> > pcard-type 0
> >>> > plugin 1
> >>> > plugin-reason 1
> >>> > power-settings 0
> >>> > pq-diag-type 0
> >>> > r-type 0
> >>> > r0-agent1-kind 4
> >>> > r0-agent1-sku Q2612A
> >>> > r0-agent1-type 1
> >>> > scan-src 0
> >>> > scan-type 0
> >>> > status-battery-check 0
> >>> > status-dynamic-counters 0
> >>> > status-type 8
> >>> > support-released True
> >>> > support-subtype 16556
> >>> > support-type 2
> >>> > support-ver 2.7.10
> >>> > tech-class ['LJZjsMono']
> >>> > tech-subclass ['Normal']
> >>> > tech-type 3
> >>> > usb-pid 11031
> >>> > usb-vid 1008
> >>> > wifi-config 0
> >>> >
> >>> > Done.
> >>> > axet at mini:~$
> >>> >
> >>> >
> >>> > 7)
> >>> >
> >>> > axet at mini:~$ hp-makeuri 001:012
> >>> >
> >>> > HP Linux Imaging and Printing System (ver. 3.12.6)
> >>> > Device URI Creation Utility ver. 5.0
> >>> >
> >>> > Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
> >>> > This software comes with ABSOLUTELY NO WARRANTY.
> >>> > This is free software, and you are welcome to distribute it
> >>> > under certain conditions. See COPYING file for more details.
> >>> >
> >>> > CUPS URI: hp:/usb/HP_LaserJet_1020?serial=JL2NBET
> >>> >
> >>> > Done.
> >>> > axet at mini:~$
> >>> >
> >>> >
> >>> > 8)
> >>> >
> >>> > axet at mini:~$ lpinfo -v
> >>> > network ipp14
> >>> > network https
> >>> > network lpd
> >>> > network ipps
> >>> > network socket
> >>> > network ipp
> >>> > network beh
> >>> > network http
> >>> > direct hp:/usb/HP_LaserJet_1020?serial=JL2NBET
> >>> > direct usb://HP/LaserJet%201020?serial=JL2NBET
> >>> > direct hpfax
> >>> > axet at mini:~$
> >>> >
> >>> > -- AK
> >>> >
> >>> >
> >>> > On 22 December 2012 00:38, Bastien ROUCARIES
> >>> > <roucaries.bastien at gmail.com>
> >>> > wrote:
> >>> >>
> >>> >> Dear alexy,
> >>> >>
> >>> >> Could you please follow the step detailled ? And please join the
> file
> >>> >> here instead of use pastebin.
> >>> >>
> >>> >> We do not know even if it is a usb or a netork devince (guess a
> netwrk
> >>> >> device).
> >>> >>
> >>> >> And failled to print is unknown to me. It could be:
> >>> >> - I wait five minute and it print nothing
> >>> >> - paper was on fire
> >>> >> - it print some garbage.
> >>> >>
> >>> >> Please follown the step on the unbuntu wiki and moreover please add
> >>> >> some words when you send email.
> >>> >>
> >>> >> Language are the proper of the humans
> >>> >>
> >>> >> Bastien
> >>> >>
> >>> >>
> >>> >>
> >>> >> On Fri, Dec 21, 2012 at 8:19 AM, Alexey Kuznetsov
> >>> >> <kuznetsov.alexey at gmail.com> wrote:
> >>> >> > Package: hplip
> >>> >> > Version: 3.12.6-3
> >>> >> >
> >>> >> > hp laser jet 1020 failed to print
> >>> >> >
> >>> >> > Printer State endup with "Idle - /usr/lib/cups/filter/hpcups
> failed"
> >>> >> > message.
> >>> >> >
> >>> >> > troubleshot.txt
> >>> >> >
> >>> >> > http://pastebin.com/esvbHW6Q
> >>> >> >
> >>> >> > -- AK
> >>> >
> >>> >
> >>
> >>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pkg-hpijs-devel/attachments/20121222/b08138b3/attachment-0001.html>
More information about the Pkg-hpijs-devel
mailing list