Bug#821082: pulseaudio: System crashes, ALSA awakes with no data to read, potential bug in snd_usb_audio
Federico M.
matta2006 at gmail.com
Fri Apr 15 09:14:35 UTC 2016
Package: pulseaudio
Version: 5.0-13
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
* What led up to the situation?
Nothing special. I was scrolling icedove window. The screen went black.
I suspect it may be related to the suspend mode.
* What exactly did you do (or not do) that was effective (or ineffective)?
Manual reboot was the only solution.
Multiple reboots (power switch on/off) were needed (the system was stuck at
boot) to restore a working session.
Finally, an OS reboot to get rid of suspend mode (not sure it is required)
Some system logs (pulseaudio error at the end):
Apr 15 09:16:06 emperor kernel: [11779.368464] Freezing user space processes
.... (elapsed 0.001 seconds) done.
Apr 15 09:16:06 emperor kernel: [11779.370005] Freezing remaining freezable
tasks ... (elapsed 0.001 seconds) done.
Apr 15 09:16:06 emperor kernel: [11779.371091] PM: Entering mem sleep
Apr 15 09:16:06 emperor kernel: [11779.371126] Suspending console(s) (use
no_console_suspend to debug)
Apr 15 09:16:06 emperor kernel: [11779.371601] sd 1:0:0:0: [sda] Synchronizing
SCSI cache
Apr 15 09:16:06 emperor kernel: [11779.374588] i8042 kbd 00:05: System wakeup
enabled by ACPI
Apr 15 09:16:06 emperor kernel: [11779.400817] sd 1:0:0:0: [sda] Stopping disk
Apr 15 09:16:06 emperor kernel: [11780.036022] PM: suspend of devices complete
after 664.599 msecs
Apr 15 09:16:06 emperor kernel: [11780.036503] PM: late suspend of devices
complete after 0.479 msecs
Apr 15 09:16:06 emperor kernel: [11780.036847] ehci-pci 0000:00:1d.7: System
wakeup enabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.036876] uhci_hcd 0000:00:1d.2: System
wakeup enabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.036912] uhci_hcd 0000:00:1d.1: System
wakeup enabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.036948] uhci_hcd 0000:00:1d.0: System
wakeup enabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.037164] uhci_hcd 0000:00:1a.2: System
wakeup enabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.037169] ehci-pci 0000:00:1a.7: System
wakeup enabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.037192] uhci_hcd 0000:00:1a.1: System
wakeup enabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.037210] uhci_hcd 0000:00:1a.0: System
wakeup enabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.192072] PM: noirq suspend of devices
complete after 155.566 msecs
Apr 15 09:16:06 emperor kernel: [11780.192884] ACPI: Preparing to enter system
sleep state S3
Apr 15 09:16:06 emperor kernel: [11780.193099] PM: Saving platform NVS memory
Apr 15 09:16:06 emperor kernel: [11780.193537] Disabling non-boot CPUs ...
Apr 15 09:16:06 emperor kernel: [11780.194833] kvm: disabling virtualization on
CPU1
Apr 15 09:16:06 emperor kernel: [11780.296018] smpboot: CPU 1 is now offline
Apr 15 09:16:06 emperor kernel: [11780.297558] kvm: disabling virtualization on
CPU2
Apr 15 09:16:06 emperor kernel: [11780.400012] smpboot: CPU 2 is now offline
Apr 15 09:16:06 emperor kernel: [11780.401570] kvm: disabling virtualization on
CPU3
Apr 15 09:16:06 emperor kernel: [11780.504006] smpboot: CPU 3 is now offline
Apr 15 09:16:06 emperor kernel: [11780.504180] ACPI: Low-level resume complete
Apr 15 09:16:06 emperor kernel: [11780.504180] PM: Restoring platform NVS
memory
Apr 15 09:16:06 emperor kernel: [11780.504180] Enabling non-boot CPUs ...
Apr 15 09:16:06 emperor kernel: [11780.504180] x86: Booting SMP configuration:
Apr 15 09:16:06 emperor kernel: [11780.504180] smpboot: Booting Node 0
Processor 1 APIC 0x1
Apr 15 09:16:06 emperor kernel: [11780.194838] kvm: enabling virtualization on
CPU1
Apr 15 09:16:06 emperor kernel: [11780.517706] CPU1 is up
Apr 15 09:16:06 emperor kernel: [11780.517784] smpboot: Booting Node 0
Processor 2 APIC 0x2
Apr 15 09:16:06 emperor kernel: [11780.297562] kvm: enabling virtualization on
CPU2
Apr 15 09:16:06 emperor kernel: [11780.531030] CPU2 is up
Apr 15 09:16:06 emperor kernel: [11780.531153] smpboot: Booting Node 0
Processor 3 APIC 0x3
Apr 15 09:16:06 emperor kernel: [11780.401574] kvm: enabling virtualization on
CPU3
Apr 15 09:16:06 emperor kernel: [11780.544477] CPU3 is up
Apr 15 09:16:06 emperor kernel: [11780.549379] ACPI: Waking up from system
sleep state S3
Apr 15 09:16:06 emperor kernel: [11780.551215] ACPI: \_SB_.PCI0.SBRG.ASOC:
Device cannot be configured due to a frequency mismatch
Apr 15 09:16:06 emperor kernel: [11780.551660] uhci_hcd 0000:00:1a.0: System
wakeup disabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.551693] uhci_hcd 0000:00:1a.1: System
wakeup disabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.551723] uhci_hcd 0000:00:1a.2: System
wakeup disabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.551893] uhci_hcd 0000:00:1d.0: System
wakeup disabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.551923] uhci_hcd 0000:00:1d.1: System
wakeup disabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.551953] uhci_hcd 0000:00:1d.2: System
wakeup disabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.564055] ehci-pci 0000:00:1a.7: System
wakeup disabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.564110] ehci-pci 0000:00:1d.7: System
wakeup disabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.708198] PM: noirq resume of devices
complete after 156.635 msecs
Apr 15 09:16:06 emperor kernel: [11780.708599] PM: early resume of devices
complete after 0.375 msecs
Apr 15 09:16:06 emperor kernel: [11780.708749] usb usb1: root hub lost power or
was reset
Apr 15 09:16:06 emperor kernel: [11780.708774] i8042 kbd 00:05: System wakeup
disabled by ACPI
Apr 15 09:16:06 emperor kernel: [11780.708794] usb usb2: root hub lost power or
was reset
Apr 15 09:16:06 emperor kernel: [11780.708835] usb usb3: root hub lost power or
was reset
Apr 15 09:16:06 emperor kernel: [11780.712057] snd_hda_intel 0000:00:1b.0: irq
46 for MSI/MSI-X
Apr 15 09:16:06 emperor kernel: [11780.712106] usb usb7: root hub lost power or
was reset
Apr 15 09:16:06 emperor kernel: [11780.712261] usb usb4: root hub lost power or
was reset
Apr 15 09:16:06 emperor kernel: [11780.712599] usb usb8: root hub lost power or
was reset
Apr 15 09:16:06 emperor kernel: [11780.712889] snd_hda_intel 0000:01:00.1: irq
47 for MSI/MSI-X
Apr 15 09:16:06 emperor kernel: [11780.729006] sd 1:0:0:0: [sda] Starting disk
Apr 15 09:16:06 emperor kernel: [11780.760912] [drm] enabling PCIE gen 2 link
speeds, disable with radeon.pcie_gen2=0
Apr 15 09:16:06 emperor kernel: [11780.763837] [drm] PCIE GART of 1024M enabled
(table at 0x000000000025D000).
Apr 15 09:16:06 emperor kernel: [11780.763909] radeon 0000:01:00.0: WB enabled
Apr 15 09:16:06 emperor kernel: [11780.763911] radeon 0000:01:00.0: fence
driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr
0xffff8800ca63fc00
Apr 15 09:16:06 emperor kernel: [11780.763912] radeon 0000:01:00.0: fence
driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr
0xffff8800ca63fc0c
Apr 15 09:16:06 emperor kernel: [11780.764769] radeon 0000:01:00.0: fence
driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr
0xffffc9001151c418
Apr 15 09:16:06 emperor kernel: [11780.780806] [drm] ring test on 0 succeeded
in 1 usecs
Apr 15 09:16:06 emperor kernel: [11780.780810] [drm] ring test on 3 succeeded
in 2 usecs
Apr 15 09:16:06 emperor kernel: [11780.976302] [drm] ring test on 5 succeeded
in 1 usecs
Apr 15 09:16:06 emperor kernel: [11780.976305] [drm] UVD initialized
successfully.
Apr 15 09:16:06 emperor kernel: [11780.976329] [drm] ib test on ring 0
succeeded in 0 usecs
Apr 15 09:16:06 emperor kernel: [11780.976350] [drm] ib test on ring 3
succeeded in 0 usecs
Apr 15 09:16:06 emperor kernel: [11781.084013] ata3: SATA link down (SStatus 0
SControl 300)
Apr 15 09:16:06 emperor kernel: [11781.084027] ata6: SATA link down (SStatus 0
SControl 300)
Apr 15 09:16:06 emperor kernel: [11781.084037] ata4: SATA link down (SStatus 0
SControl 300)
Apr 15 09:16:06 emperor kernel: [11781.092022] ata5: SATA link down (SStatus 0
SControl 300)
Apr 15 09:16:06 emperor kernel: [11781.146423] [drm] ib test on ring 5
succeeded
Apr 15 09:16:06 emperor kernel: [11781.176014] usb 3-2: reset low-speed USB
device number 2 using uhci_hcd
Apr 15 09:16:06 emperor kernel: [11781.184011] usb 2-1: reset low-speed USB
device number 2 using uhci_hcd
Apr 15 09:16:06 emperor kernel: [11781.502005] PM: resume of devices complete
after 793.403 msecs
Apr 15 09:16:06 emperor kernel: [11781.502263] PM: Finishing wakeup.
Apr 15 09:16:07 emperor ntpd[834]: Deleting interface #5 eth0,
fe80::21d:60ff:febc:f692#123, interface stats: received=0, sent=0, dropped=0,
active_time=11748 secs
Apr 15 09:16:07 emperor ntpd[834]: Deleting interface #3 eth0,
192.168.1.24#123, interface stats: received=228, sent=230, dropped=0,
active_time=11748 secs
Apr 15 09:16:07 emperor kernel: [11781.502264] Restarting tasks ... done.
Apr 15 09:16:07 emperor ntpd[834]: 195.154.216.35 interface 192.168.1.24 ->
(none)
Apr 15 09:16:07 emperor ntpd[834]: 195.154.216.44 interface 192.168.1.24 ->
(none)
Apr 15 09:16:07 emperor ntpd[834]: 129.250.35.250 interface 192.168.1.24 ->
(none)
Apr 15 09:16:07 emperor ntpd[834]: 195.154.71.176 interface 192.168.1.24 ->
(none)
Apr 15 09:16:07 emperor ntpd[834]: peers refreshed
Apr 15 09:16:07 emperor systemd[1164]: Time has been changed
Apr 15 09:16:07 emperor systemd-sleep[2869]: System resumed.
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) AIGLX: Resuming AIGLX clients
after VT switch
Apr 15 09:16:07 emperor NetworkManager[527]: <info> wake requested (sleeping:
yes enabled: yes)
Apr 15 09:16:07 emperor NetworkManager[527]: <info> waking up...
Apr 15 09:16:07 emperor NetworkManager[527]: <info> (eth0): device state
change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Apr 15 09:16:07 emperor NetworkManager[527]: <info> (eth0): preparing device
Apr 15 09:16:07 emperor NetworkManager[527]: <info> NetworkManager state is now
DISCONNECTED
Apr 15 09:16:07 emperor kernel: [11781.514848] sky2 0000:02:00.0 eth0: enabling
interface
Apr 15 09:16:07 emperor kernel: [11781.514980] IPv6: ADDRCONF(NETDEV_UP): eth0:
link is not ready
Apr 15 09:16:07 emperor anacron[2958]: Anacron 2.3 started on 2016-04-15
Apr 15 09:16:07 emperor anacron[2958]: Will run job `cron.daily' in 5 min.
Apr 15 09:16:07 emperor anacron[2958]: Jobs will be executed sequentially
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID vendor "ACR",
prod id 44304
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using hsync ranges
from config file
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using vrefresh ranges
from config file
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Printing DDC gathered
Modelines:
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(64.0 kHz eP)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
kHz e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2
kHz e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz
e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz
e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz
e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz
e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz
e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(80.0 kHz e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(60.0 kHz e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(56.5 kHz e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(48.4 kHz e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7
kHz e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
kHz e)
Apr 15 09:16:07 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
kHz e)
Apr 15 09:16:07 emperor kernel: [11781.592025] ata1: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
Apr 15 09:16:07 emperor kernel: [11781.594483] ata1.00: configured for UDMA/100
Apr 15 09:16:08 emperor NetworkManager[527]: <info> (eth0): link connected
Apr 15 09:16:08 emperor NetworkManager[527]: <info> (eth0): device state
change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Apr 15 09:16:08 emperor kernel: [11783.387349] sky2 0000:02:00.0 eth0: Link is
up at 100 Mbps, full duplex, flow control both
Apr 15 09:16:08 emperor kernel: [11783.387361] IPv6: ADDRCONF(NETDEV_CHANGE):
eth0: link becomes ready
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Auto-activating connection
'Wired connection 1'.
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) starting
connection 'Wired connection 1'
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) Stage 1
of 5 (Device Prepare) scheduled...
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) Stage 1
of 5 (Device Prepare) started...
Apr 15 09:16:08 emperor NetworkManager[527]: <info> (eth0): device state
change: disconnected -> prepare (reason 'none') [30 40 0]
Apr 15 09:16:08 emperor NetworkManager[527]: <info> NetworkManager state is now
CONNECTING
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) Stage 2
of 5 (Device Configure) scheduled...
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) Stage 1
of 5 (Device Prepare) complete.
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) Stage 2
of 5 (Device Configure) starting...
Apr 15 09:16:08 emperor NetworkManager[527]: <info> (eth0): device state
change: prepare -> config (reason 'none') [40 50 0]
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) Stage 2
of 5 (Device Configure) successful.
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) Stage 3
of 5 (IP Configure Start) scheduled.
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) Stage 2
of 5 (Device Configure) complete.
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) Stage 3
of 5 (IP Configure Start) started...
Apr 15 09:16:08 emperor NetworkManager[527]: <info> (eth0): device state
change: config -> ip-config (reason 'none') [50 70 0]
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) Beginning
DHCPv4 transaction (timeout in 45 seconds)
Apr 15 09:16:08 emperor NetworkManager[527]: <info> dhclient started with pid
2965
Apr 15 09:16:08 emperor NetworkManager[527]: <info> Activation (eth0) Stage 3
of 5 (IP Configure Start) complete.
Apr 15 09:16:08 emperor NetworkManager[527]: <info> (eth0): DHCPv4 state
changed nbi -> preinit
Apr 15 09:16:08 emperor dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port
67
Apr 15 09:16:09 emperor dhclient: DHCPACK from 192.168.1.1
Apr 15 09:16:09 emperor NetworkManager[527]: <info> (eth0): DHCPv4 state
changed preinit -> reboot
Apr 15 09:16:09 emperor NetworkManager[527]: <info> address 192.168.1.24
Apr 15 09:16:09 emperor NetworkManager[527]: <info> plen 24 (255.255.255.0)
Apr 15 09:16:09 emperor NetworkManager[527]: <info> gateway 192.168.1.1
Apr 15 09:16:09 emperor NetworkManager[527]: <info> server identifier
192.168.1.1
Apr 15 09:16:09 emperor NetworkManager[527]: <info> lease time 86400
Apr 15 09:16:09 emperor NetworkManager[527]: <info> nameserver '192.168.1.1'
Apr 15 09:16:09 emperor NetworkManager[527]: <info> nameserver '192.168.1.1'
Apr 15 09:16:09 emperor NetworkManager[527]: <info> domain name 'home'
Apr 15 09:16:09 emperor NetworkManager[527]: <info> Activation (eth0) Stage 5
of 5 (IPv4 Configure Commit) scheduled...
Apr 15 09:16:09 emperor NetworkManager[527]: <info> Activation (eth0) Stage 5
of 5 (IPv4 Commit) started...
Apr 15 09:16:09 emperor NetworkManager[527]: <info> (eth0): device state
change: ip-config -> ip-check (reason 'none') [70 80 0]
Apr 15 09:16:09 emperor NetworkManager[527]: <info> Activation (eth0) Stage 5
of 5 (IPv4 Commit) complete.
Apr 15 09:16:09 emperor NetworkManager[527]: <info> (eth0): device state
change: ip-check -> secondaries (reason 'none') [80 90 0]
Apr 15 09:16:09 emperor NetworkManager[527]: <info> (eth0): device state
change: secondaries -> activated (reason 'none') [90 100 0]
Apr 15 09:16:09 emperor NetworkManager[527]: <info> NetworkManager state is now
CONNECTED_LOCAL
Apr 15 09:16:09 emperor avahi-daemon[534]: Joining mDNS multicast group on
interface eth0.IPv4 with address 192.168.1.24.
Apr 15 09:16:09 emperor avahi-daemon[534]: New relevant interface eth0.IPv4 for
mDNS.
Apr 15 09:16:09 emperor avahi-daemon[534]: Registering new address record for
192.168.1.24 on eth0.IPv4.
Apr 15 09:16:10 emperor avahi-daemon[534]: Joining mDNS multicast group on
interface eth0.IPv6 with address fe80::21d:60ff:febc:f692.
Apr 15 09:16:10 emperor avahi-daemon[534]: New relevant interface eth0.IPv6 for
mDNS.
Apr 15 09:16:10 emperor avahi-daemon[534]: Registering new address record for
fe80::21d:60ff:febc:f692 on eth0.*.
Apr 15 09:16:11 emperor ntpd[834]: Listen normally on 6 eth0 192.168.1.24 UDP
123
Apr 15 09:16:11 emperor ntpd[834]: Listen normally on 7 eth0
fe80::21d:60ff:febc:f692 UDP 123
Apr 15 09:16:11 emperor ntpd[834]: peers refreshed
Apr 15 09:16:16 emperor kernel: [11790.752010] ata2: softreset failed (device
not ready)
Apr 15 09:16:17 emperor kernel: [11791.972013] ata2: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Apr 15 09:16:17 emperor kernel: [11791.978795] ata2.00: configured for UDMA/133
Apr 15 09:16:18 emperor dhclient: bound to 192.168.1.24 -- renewal in 40475
seconds.
Apr 15 09:16:18 emperor NetworkManager[527]: <info> NetworkManager state is now
CONNECTED_GLOBAL
Apr 15 09:16:18 emperor NetworkManager[527]: <info> Policy set 'Wired
connection 1' (eth0) as default for IPv4 routing and DNS.
Apr 15 09:16:18 emperor NetworkManager[527]: <info> Activation (eth0)
successful, device activated.
Apr 15 09:16:18 emperor dbus[536]: [system] Activating via systemd: service
name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-
dispatcher.service'
Apr 15 09:16:18 emperor NetworkManager[527]: <info> Activation (eth0) Stage 4
of 5 (IPv6 Configure Timeout) scheduled...
Apr 15 09:16:18 emperor NetworkManager[527]: <info> Activation (eth0) Stage 4
of 5 (IPv6 Configure Timeout) started...
Apr 15 09:16:18 emperor NetworkManager[527]: <info> Activation (eth0) Stage 4
of 5 (IPv6 Configure Timeout) complete.
Apr 15 09:16:18 emperor systemd[1]: Found ordering cycle on sysinit.target/stop
Apr 15 09:16:18 emperor systemd[1]: Found dependency on rpcbind.service/stop
Apr 15 09:16:18 emperor systemd[1]: Found dependency on network-
online.target/stop
Apr 15 09:16:18 emperor systemd[1]: Found dependency on NetworkManager-wait-
online.service/stop
Apr 15 09:16:18 emperor systemd[1]: Found dependency on
NetworkManager.service/stop
Apr 15 09:16:18 emperor systemd[1]: Found dependency on basic.target/stop
Apr 15 09:16:18 emperor systemd[1]: Found dependency on sysinit.target/stop
Apr 15 09:16:18 emperor systemd[1]: Breaking ordering cycle by deleting job
rpcbind.service/stop
Apr 15 09:16:18 emperor systemd[1]: Job rpcbind.service/stop deleted to break
ordering cycle starting with sysinit.target/stop
Apr 15 09:16:18 emperor rsyslogd: [origin software="rsyslogd" swVersion="8.4.2"
x-pid="575" x-info="http://www.rsyslog.com"] exiting on signal 15.
Apr 15 09:17:26 emperor rsyslogd: [origin software="rsyslogd" swVersion="8.4.2"
x-pid="572" x-info="http://www.rsyslog.com"] start
Apr 15 09:17:26 emperor systemd-modules-load[173]: Inserted module 'lp'
Apr 15 09:17:26 emperor systemd-modules-load[173]: Inserted module 'ppdev'
Apr 15 09:17:26 emperor kernel: [ 0.000000] Initializing cgroup subsys
cpuset
Apr 15 09:17:26 emperor kernel: [ 0.000000] Initializing cgroup subsys cpu
Apr 15 09:17:26 emperor kernel: [ 0.000000] Initializing cgroup subsys
cpuacct
Apr 15 09:17:26 emperor systemd-modules-load[173]: Inserted module 'parport_pc'
Apr 15 09:17:26 emperor kernel: [ 0.000000] Linux version 3.16.0-4-amd64
(debian-kernel at lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP
Debian 3.16.7-ckt25-2 (2016-04-08)
Apr 15 09:17:26 emperor kernel: [ 0.000000] Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=c5884e51-d422-45d6-bf84-3c1d51b7d605 ro vga=771 quiet
Apr 15 09:17:26 emperor systemd-modules-load[173]: Inserted module 'fuse'
Apr 15 09:17:26 emperor kernel: [ 0.000000] e820: BIOS-provided physical RAM
map:
Apr 15 09:17:26 emperor nfs-common[178]: Starting NFS common utilities: statd
Apr 15 09:17:26 emperor kernel: [ 0.000000] BIOS-e820: [mem
0x0000000000000000-0x000000000009e7ff] usable
Apr 15 09:17:26 emperor kernel: [ 0.000000] BIOS-e820: [mem
0x000000000009e800-0x000000000009ffff] reserved
Apr 15 09:17:26 emperor kernel: [ 0.000000] BIOS-e820: [mem
0x00000000000e4000-0x00000000000fffff] reserved
Apr 15 09:17:26 emperor kernel: [ 0.000000] BIOS-e820: [mem
0x0000000000100000-0x00000000cff7ffff] usable
Apr 15 09:17:26 emperor kernel: [ 0.000000] BIOS-e820: [mem
0x00000000cff80000-0x00000000cff8dfff] ACPI data
Apr 15 09:17:26 emperor kernel: [ 0.000000] BIOS-e820: [mem
0x00000000cff8e000-0x00000000cffdffff] ACPI NVS
Apr 15 09:17:26 emperor kernel: [ 0.000000] BIOS-e820: [mem
0x00000000cffe0000-0x00000000cfffffff] reserved
Apr 15 09:17:26 emperor nfs-common[178]: Not starting: portmapper is not
running ... (warning).
Apr 15 09:17:26 emperor kernel: [ 0.000000] BIOS-e820: [mem
0x00000000fee00000-0x00000000fee00fff] reserved
Apr 15 09:17:26 emperor kernel: [ 0.000000] BIOS-e820: [mem
0x00000000fff00000-0x00000000ffffffff] reserved
Apr 15 09:17:26 emperor kernel: [ 0.000000] BIOS-e820: [mem
0x0000000100000000-0x000000022fffffff] usable
Apr 15 09:17:26 emperor kernel: [ 0.000000] NX (Execute Disable) protection:
active
Apr 15 09:17:26 emperor kernel: [ 0.000000] SMBIOS 0.4 present.
Apr 15 09:17:26 emperor kernel: [ 0.000000] DMI: System manufacturer
P5E3/P5E3, BIOS 1404 03/31/2009
Apr 15 09:17:26 emperor keyboard-setup[201]: Setting preliminary keymap...done.
Apr 15 09:17:26 emperor kernel: [ 0.000000] e820: update [mem
0x00000000-0x00000fff] usable ==> reserved
Apr 15 09:17:26 emperor kernel: [ 0.000000] e820: remove [mem
0x000a0000-0x000fffff] usable
Apr 15 09:17:26 emperor kernel: [ 0.000000] AGP: No AGP bridge found
Apr 15 09:17:26 emperor kernel: [ 0.000000] e820: last_pfn = 0x230000
max_arch_pfn = 0x400000000
Apr 15 09:17:26 emperor kernel: [ 0.000000] MTRR default type: uncachable
Apr 15 09:17:26 emperor mtp-probe: checking bus 4, device 2:
"/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1"
Apr 15 09:17:26 emperor kernel: [ 0.000000] MTRR fixed ranges enabled:
Apr 15 09:17:26 emperor kernel: [ 0.000000] 00000-9FFFF write-back
Apr 15 09:17:26 emperor kernel: [ 0.000000] A0000-BFFFF uncachable
Apr 15 09:17:26 emperor mtp-probe: checking bus 5, device 2:
"/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2"
Apr 15 09:17:26 emperor kernel: [ 0.000000] C0000-DFFFF write-protect
Apr 15 09:17:26 emperor kernel: [ 0.000000] E0000-EFFFF write-through
Apr 15 09:17:26 emperor mtp-probe: bus: 4, device: 2 was not an MTP device
Apr 15 09:17:26 emperor kernel: [ 0.000000] F0000-FFFFF write-protect
Apr 15 09:17:26 emperor mtp-probe: checking bus 1, device 3:
"/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-4"
Apr 15 09:17:26 emperor kernel: [ 0.000000] MTRR variable ranges enabled:
Apr 15 09:17:26 emperor kernel: [ 0.000000] 0 base 0D0000000 mask
FF0000000 uncachable
Apr 15 09:17:26 emperor mtp-probe: bus: 1, device: 3 was not an MTP device
Apr 15 09:17:26 emperor kernel: [ 0.000000] 1 base 0E0000000 mask
FE0000000 uncachable
Apr 15 09:17:26 emperor kernel: [ 0.000000] 2 base 000000000 mask
E00000000 write-back
Apr 15 09:17:26 emperor kernel: [ 0.000000] 3 base 200000000 mask
FE0000000 write-back
Apr 15 09:17:26 emperor kernel: [ 0.000000] 4 base 220000000 mask
FF0000000 write-back
Apr 15 09:17:26 emperor mtp-probe: bus: 5, device: 2 was not an MTP device
Apr 15 09:17:26 emperor kernel: [ 0.000000] 5 disabled
Apr 15 09:17:26 emperor systemd-fsck[319]: homes : propre, 62403/26689536
fichiers, 25139924/106736384 blocs
Apr 15 09:17:26 emperor kernel: [ 0.000000] 6 disabled
Apr 15 09:17:26 emperor kernel: [ 0.000000] 7 disabled
Apr 15 09:17:26 emperor ufw[380]: Skip starting firewall: ufw (not
enabled)...done.
Apr 15 09:17:26 emperor kernel: [ 0.000000] x86 PAT enabled: cpu 0, old
0x7040600070406, new 0x7010600070106
Apr 15 09:17:26 emperor kernel: [ 0.000000] e820: update [mem
0xd0000000-0xffffffff] usable ==> reserved
Apr 15 09:17:26 emperor kernel: [ 0.000000] e820: last_pfn = 0xcff80
max_arch_pfn = 0x400000000
Apr 15 09:17:26 emperor kernel: [ 0.000000] found SMP MP-table at [mem
0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Apr 15 09:17:26 emperor kbd[379]: Setting console screen modes.
Apr 15 09:17:26 emperor kernel: [ 0.000000] Base memory trampoline at
[ffff880000098000] 98000 size 24576
Apr 15 09:17:26 emperor kernel: [ 0.000000] init_memory_mapping: [mem
0x00000000-0x000fffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] [mem 0x00000000-0x000fffff]
page 4k
Apr 15 09:17:26 emperor rdnssd[377]: Starting IPv6 Recursive DNS Server
discovery Daemon: rdnssd.
Apr 15 09:17:26 emperor kernel: [ 0.000000] BRK [0x01af4000, 0x01af4fff]
PGTABLE
Apr 15 09:17:26 emperor kernel: [ 0.000000] BRK [0x01af5000, 0x01af5fff]
PGTABLE
Apr 15 09:17:26 emperor kernel: [ 0.000000] BRK [0x01af6000, 0x01af6fff]
PGTABLE
Apr 15 09:17:26 emperor kbd[379]: setterm: $TERM n'est pas défini.
Apr 15 09:17:26 emperor kernel: [ 0.000000] init_memory_mapping: [mem
0x22fe00000-0x22fffffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] [mem 0x22fe00000-0x22fffffff]
page 2M
Apr 15 09:17:26 emperor kernel: [ 0.000000] BRK [0x01af7000, 0x01af7fff]
PGTABLE
Apr 15 09:17:26 emperor console-setup[438]: Setting up console font and
keymap...done.
Apr 15 09:17:26 emperor kernel: [ 0.000000] init_memory_mapping: [mem
0x22c000000-0x22fdfffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] [mem 0x22c000000-0x22fdfffff]
page 2M
Apr 15 09:17:26 emperor kernel: [ 0.000000] init_memory_mapping: [mem
0x200000000-0x22bffffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] [mem 0x200000000-0x22bffffff]
page 2M
Apr 15 09:17:26 emperor kernel: [ 0.000000] init_memory_mapping: [mem
0x00100000-0xcff7ffff]
Apr 15 09:17:26 emperor networking[410]: Configuring network interfaces...done.
Apr 15 09:17:26 emperor kernel: [ 0.000000] [mem 0x00100000-0x001fffff]
page 4k
Apr 15 09:17:26 emperor kernel: [ 0.000000] [mem 0x00200000-0xcfdfffff]
page 2M
Apr 15 09:17:26 emperor kernel: [ 0.000000] [mem 0xcfe00000-0xcff7ffff]
page 4k
Apr 15 09:17:26 emperor kernel: [ 0.000000] init_memory_mapping: [mem
0x100000000-0x1ffffffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] [mem 0x100000000-0x1ffffffff]
page 2M
Apr 15 09:17:26 emperor gdomap[533]: GNUstep distributed object mapper
disabled, see /etc/default/gdomap.
Apr 15 09:17:26 emperor kernel: [ 0.000000] BRK [0x01af8000, 0x01af8fff]
PGTABLE
Apr 15 09:17:26 emperor kernel: [ 0.000000] BRK [0x01af9000, 0x01af9fff]
PGTABLE
Apr 15 09:17:26 emperor kernel: [ 0.000000] RAMDISK: [mem
0x361ee000-0x370eefff]
Apr 15 09:17:26 emperor cron[523]: (CRON) INFO (pidfile fd = 3)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: Early table checksum
verification disabled
Apr 15 09:17:26 emperor speech-dispatcher[535]: speech-dispatcher disabled;
edit /etc/default/speech-dispatcher.
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: RSDP 0x00000000000FBC30
000014 (v00 ACPIAM)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: RSDT 0x00000000CFF80000
000040 (v01 03000931 MSFT 00000097)
Apr 15 09:17:26 emperor anacron[527]: Anacron 2.3 started on 2016-04-15
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: FACP 0x00000000CFF80200
000084 (v02 A_M_I_ OEMFACP 03000931 MSFT 00000097)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: DSDT 0x00000000CFF80440
008B52 (v01 A0835 A0835002 00000002 INTL 20060113)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: FACS 0x00000000CFF8E000
000040
Apr 15 09:17:26 emperor cron[523]: (CRON) INFO (Running @reboot jobs)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: APIC 0x00000000CFF80390
00006C (v01 A_M_I_ OEMAPIC 03000931 MSFT 00000097)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: MCFG 0x00000000CFF80400
00003C (v01 A_M_I_ OEMMCFG 03000931 MSFT 00000097)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: OEMB 0x00000000CFF8E040
000081 (v01 A_M_I_ AMI_OEM 03000931 MSFT 00000097)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: HPET 0x00000000CFF88FA0
000038 (v01 A_M_I_ OEMHPET 03000931 MSFT 00000097)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: OSFR 0x00000000CFF88FE0
0000B0 (v01 A_M_I_ OEMOSFR 03000931 MSFT 00000097)
Apr 15 09:17:26 emperor avahi-daemon[536]: Found user 'avahi' (UID 106) and
group 'avahi' (GID 112).
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: SLIC 0x00000000CFF89090
000176 (v01 03000931 MSFT 00000097)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: Local APIC address
0xfee00000
Apr 15 09:17:26 emperor avahi-daemon[536]: Successfully dropped root
privileges.
Apr 15 09:17:26 emperor kernel: [ 0.000000] No NUMA configuration found
Apr 15 09:17:26 emperor kernel: [ 0.000000] Faking a node at [mem
0x0000000000000000-0x000000022fffffff]
Apr 15 09:17:26 emperor avahi-daemon[536]: avahi-daemon 0.6.31 starting up.
Apr 15 09:17:26 emperor kernel: [ 0.000000] Initmem setup node 0 [mem
0x00000000-0x22fffffff]
Apr 15 09:17:26 emperor anacron[527]: Will run job `cron.daily' in 5 min.
Apr 15 09:17:26 emperor kernel: [ 0.000000] NODE_DATA [mem
0x22fff5000-0x22fff9fff]
Apr 15 09:17:26 emperor anacron[527]: Jobs will be executed sequentially
Apr 15 09:17:26 emperor kernel: [ 0.000000]
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff]
on node 0
Apr 15 09:17:26 emperor kernel: [ 0.000000] Zone ranges:
Apr 15 09:17:26 emperor ModemManager[528]: <info> ModemManager (version 1.4.0)
starting in system bus...
Apr 15 09:17:26 emperor kernel: [ 0.000000] DMA [mem
0x00001000-0x00ffffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] DMA32 [mem
0x01000000-0xffffffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] Normal [mem
0x100000000-0x22fffffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] Movable zone start for each node
Apr 15 09:17:26 emperor kernel: [ 0.000000] Early memory node ranges
Apr 15 09:17:26 emperor kernel: [ 0.000000] node 0: [mem
0x00001000-0x0009dfff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] node 0: [mem
0x00100000-0xcff7ffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] node 0: [mem
0x100000000-0x22fffffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] On node 0 totalpages: 2096925
Apr 15 09:17:26 emperor timidity[534]: Starting TiMidity++ ALSA midi
emulation....
Apr 15 09:17:26 emperor kernel: [ 0.000000] DMA zone: 56 pages used for
memmap
Apr 15 09:17:26 emperor kernel: [ 0.000000] DMA zone: 21 pages reserved
Apr 15 09:17:26 emperor kernel: [ 0.000000] DMA zone: 3997 pages, LIFO
batch:0
Apr 15 09:17:26 emperor kernel: [ 0.000000] DMA32 zone: 11591 pages used
for memmap
Apr 15 09:17:26 emperor NetworkManager[529]: <info> NetworkManager (version
0.9.10.0) is starting...
Apr 15 09:17:26 emperor kernel: [ 0.000000] DMA32 zone: 847744 pages, LIFO
batch:31
Apr 15 09:17:26 emperor kernel: [ 0.000000] Normal zone: 17024 pages used
for memmap
Apr 15 09:17:26 emperor kernel: [ 0.000000] Normal zone: 1245184 pages,
LIFO batch:31
Apr 15 09:17:26 emperor NetworkManager[529]: <info> Read config:
/etc/NetworkManager/NetworkManager.conf
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: Local APIC address
0xfee00000
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x00] enabled)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02]
lapic_id[0x01] enabled)
Apr 15 09:17:26 emperor NetworkManager[529]: <info> WEXT support is enabled
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03]
lapic_id[0x02] enabled)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x03] enabled)
Apr 15 09:17:26 emperor pulseaudio[567]: [pulseaudio] authkey.c: Failed to open
cookie file '/etc/timidity/.config/pulse/cookie': Aucun fichier ou dossier de
ce type
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: IOAPIC (id[0x04]
address[0xfec00000] gsi_base[0])
Apr 15 09:17:26 emperor kernel: [ 0.000000] IOAPIC[0]: apic_id 4, version
32, address 0xfec00000, GSI 0-23
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq
0 global_irq 2 dfl dfl)
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq
9 global_irq 9 high level)
Apr 15 09:17:26 emperor pulseaudio[567]: [pulseaudio] authkey.c: Failed to load
authorization key '/etc/timidity/.config/pulse/cookie': Aucun fichier ou
dossier de ce type
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: IRQ0 used by override.
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: IRQ2 used by override.
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: IRQ9 used by override.
Apr 15 09:17:26 emperor pulseaudio[567]: [pulseaudio] authkey.c: Failed to open
cookie file '/etc/timidity/.pulse-cookie': Aucun fichier ou dossier de ce type
Apr 15 09:17:26 emperor kernel: [ 0.000000] Using ACPI (MADT) for SMP
configuration information
Apr 15 09:17:26 emperor kernel: [ 0.000000] ACPI: HPET id: 0x8086a301 base:
0xfed00000
Apr 15 09:17:26 emperor kernel: [ 0.000000] smpboot: Allowing 4 CPUs, 0
hotplug CPUs
Apr 15 09:17:26 emperor kernel: [ 0.000000] nr_irqs_gsi: 40
Apr 15 09:17:26 emperor pulseaudio[567]: [pulseaudio] authkey.c: Failed to load
authorization key '/etc/timidity/.pulse-cookie': Aucun fichier ou dossier de ce
type
Apr 15 09:17:26 emperor kernel: [ 0.000000] PM: Registered nosave memory:
[mem 0x0009e000-0x0009efff]
Apr 15 09:17:26 emperor pulseaudio[567]: [pulseaudio] authkey.c: Failed to open
cookie file '/etc/timidity/.config/pulse/cookie': Aucun fichier ou dossier de
ce type
Apr 15 09:17:26 emperor kernel: [ 0.000000] PM: Registered nosave memory:
[mem 0x0009f000-0x0009ffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] PM: Registered nosave memory:
[mem 0x000a0000-0x000e3fff]
Apr 15 09:17:26 emperor pulseaudio[567]: [pulseaudio] authkey.c: Failed to load
authorization key '/etc/timidity/.config/pulse/cookie': Aucun fichier ou
dossier de ce type
Apr 15 09:17:26 emperor kernel: [ 0.000000] PM: Registered nosave memory:
[mem 0x000e4000-0x000fffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] PM: Registered nosave memory:
[mem 0xcff80000-0xcff8dfff]
Apr 15 09:17:26 emperor pulseaudio[567]: [autospawn] core-util.c: Home
directory not accessible: Permission non accordée
Apr 15 09:17:26 emperor pulseaudio[567]: [autospawn] lock-autospawn.c:
Impossible d'accèder au verrou autonome.
Apr 15 09:17:26 emperor pulseaudio[567]: [pulseaudio] main.c: Failed to acquire
autospawn lock
Apr 15 09:17:26 emperor avahi-daemon[536]: Successfully called chroot().
Apr 15 09:17:26 emperor avahi-daemon[536]: Successfully dropped remaining
capabilities.
Apr 15 09:17:26 emperor dbus[537]: [system] Successfully activated service
'org.freedesktop.systemd1'
Apr 15 09:17:26 emperor dbus[537]: [system] Activating via systemd: service
name='org.freedesktop.PolicyKit1' unit='polkitd.service'
Apr 15 09:17:26 emperor avahi-daemon[536]: No service file found in
/etc/avahi/services.
Apr 15 09:17:26 emperor avahi-daemon[536]: Network interface enumeration
completed.
Apr 15 09:17:26 emperor avahi-daemon[536]: Registering HINFO record with values
'X86_64'/'LINUX'.
Apr 15 09:17:26 emperor avahi-daemon[536]: Server startup complete. Host name
is emperor.local. Local service cookie is 1346209450.
Apr 15 09:17:26 emperor acpid: starting up with netlink and the input layer
Apr 15 09:17:26 emperor kernel: [ 0.000000] PM: Registered nosave memory:
[mem 0xcff8e000-0xcffdffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] PM: Registered nosave memory:
[mem 0xcffe0000-0xcfffffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] PM: Registered nosave memory:
[mem 0xd0000000-0xfedfffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] PM: Registered nosave memory:
[mem 0xfee00000-0xfee00fff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] PM: Registered nosave memory:
[mem 0xfee01000-0xffefffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] PM: Registered nosave memory:
[mem 0xfff00000-0xffffffff]
Apr 15 09:17:26 emperor kernel: [ 0.000000] e820: [mem
0xd0000000-0xfedfffff] available for PCI devices
Apr 15 09:17:26 emperor kernel: [ 0.000000] Booting paravirtualized kernel
on bare hardware
Apr 15 09:17:26 emperor kernel: [ 0.000000] setup_percpu: NR_CPUS:512
nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
Apr 15 09:17:26 emperor kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu
@ffff88022fc00000 s80896 r8192 d21504 u524288
Apr 15 09:17:26 emperor kernel: [ 0.000000] pcpu-alloc: s80896 r8192 d21504
u524288 alloc=1*2097152
Apr 15 09:17:26 emperor kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3
Apr 15 09:17:26 emperor kernel: [ 0.000000] Built 1 zonelists in Zone order,
mobility grouping on. Total pages: 2068233
Apr 15 09:17:26 emperor kernel: [ 0.000000] Policy zone: Normal
Apr 15 09:17:26 emperor kernel: [ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=c5884e51-d422-45d6-bf84-3c1d51b7d605 ro vga=771 quiet
Apr 15 09:17:26 emperor kernel: [ 0.000000] PID hash table entries: 4096
(order: 3, 32768 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.000000] xsave: enabled xstate_bv 0x3,
cntxt size 0x240
Apr 15 09:17:26 emperor kernel: [ 0.000000] AGP: Checking aperture...
Apr 15 09:17:26 emperor kernel: [ 0.000000] AGP: No AGP bridge found
Apr 15 09:17:26 emperor kernel: [ 0.000000] Calgary: detecting Calgary via
BIOS EBDA area
Apr 15 09:17:26 emperor kernel: [ 0.000000] Calgary: Unable to locate Rio
Grande table in EBDA - bailing!
Apr 15 09:17:26 emperor kernel: [ 0.000000] Memory: 8177500K/8387700K
available (5222K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss,
210200K reserved)
Apr 15 09:17:26 emperor kernel: [ 0.000000] Hierarchical RCU implementation.
Apr 15 09:17:26 emperor kernel: [ 0.000000] RCU dyntick-idle grace-period
acceleration is enabled.
Apr 15 09:17:26 emperor kernel: [ 0.000000] RCU restricting CPUs from
NR_CPUS=512 to nr_cpu_ids=4.
Apr 15 09:17:26 emperor kernel: [ 0.000000] RCU: Adjusting geometry for
rcu_fanout_leaf=16, nr_cpu_ids=4
Apr 15 09:17:26 emperor kernel: [ 0.000000] NR_IRQS:33024 nr_irqs:712 16
Apr 15 09:17:26 emperor kernel: [ 0.000000] Console: colour dummy device
80x25
Apr 15 09:17:26 emperor kernel: [ 0.000000] console [tty0] enabled
Apr 15 09:17:26 emperor kernel: [ 0.000000] hpet clockevent registered
Apr 15 09:17:26 emperor kernel: [ 0.000000] tsc: Fast TSC calibration using
PIT
Apr 15 09:17:26 emperor kernel: [ 0.000000] tsc: Detected 2999.977 MHz
processor
Apr 15 09:17:26 emperor kernel: [ 0.004009] Calibrating delay loop
(skipped), value calculated using timer frequency.. 5999.95 BogoMIPS
(lpj=11999908)
Apr 15 09:17:26 emperor kernel: [ 0.004011] pid_max: default: 32768 minimum:
301
Apr 15 09:17:26 emperor kernel: [ 0.004020] ACPI: Core revision 20140424
Apr 15 09:17:26 emperor kernel: [ 0.011248] ACPI: All ACPI Tables
successfully acquired
Apr 15 09:17:26 emperor kernel: [ 0.011279] Security Framework initialized
Apr 15 09:17:26 emperor kernel: [ 0.011289] AppArmor: AppArmor disabled by
boot time parameter
Apr 15 09:17:26 emperor kernel: [ 0.011290] Yama: disabled by default;
enable with sysctl kernel.yama.*
Apr 15 09:17:26 emperor kernel: [ 0.011788] Dentry cache hash table entries:
1048576 (order: 11, 8388608 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.017838] Inode-cache hash table entries:
524288 (order: 10, 4194304 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.020203] Mount-cache hash table entries:
16384 (order: 5, 131072 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.020214] Mountpoint-cache hash table
entries: 16384 (order: 5, 131072 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.020604] Initializing cgroup subsys
memory
Apr 15 09:17:26 emperor kernel: [ 0.020610] Initializing cgroup subsys
devices
Apr 15 09:17:26 emperor kernel: [ 0.020619] Initializing cgroup subsys
freezer
Apr 15 09:17:26 emperor kernel: [ 0.020622] Initializing cgroup subsys
net_cls
Apr 15 09:17:26 emperor kernel: [ 0.020627] Initializing cgroup subsys blkio
Apr 15 09:17:26 emperor kernel: [ 0.020632] Initializing cgroup subsys
perf_event
Apr 15 09:17:26 emperor kernel: [ 0.020633] Initializing cgroup subsys
net_prio
Apr 15 09:17:26 emperor kernel: [ 0.020659] CPU: Physical Processor ID: 0
Apr 15 09:17:26 emperor kernel: [ 0.020660] CPU: Processor Core ID: 0
Apr 15 09:17:26 emperor kernel: [ 0.020661] mce: CPU supports 6 MCE banks
Apr 15 09:17:26 emperor kernel: [ 0.020667] CPU0: Thermal monitoring enabled
(TM2)
Apr 15 09:17:26 emperor kernel: [ 0.020670] process: using mwait in idle
threads
Apr 15 09:17:26 emperor kernel: [ 0.020674] Last level iTLB entries: 4KB
128, 2MB 4, 4MB 4
Apr 15 09:17:26 emperor kernel: [ 0.020674] Last level dTLB entries: 4KB
256, 2MB 0, 4MB 32, 1GB 0
Apr 15 09:17:26 emperor kernel: [ 0.020674] tlb_flushall_shift: -1
Apr 15 09:17:26 emperor kernel: [ 0.020746] Freeing SMP alternatives memory:
20K (ffffffff81a1b000 - ffffffff81a20000)
Apr 15 09:17:26 emperor kernel: [ 0.024004] ftrace: allocating 21683 entries
in 85 pages
Apr 15 09:17:26 emperor kernel: [ 0.032394] ..TIMER: vector=0x30 apic1=0
pin1=2 apic2=-1 pin2=-1
Apr 15 09:17:26 emperor kernel: [ 0.072538] smpboot: CPU0: Intel(R)
Core(TM)2 Quad CPU Q9650 @ 3.00GHz (fam: 06, model: 17, stepping: 0a)
Apr 15 09:17:26 emperor kernel: [ 0.076000] APIC calibration not consistent
with PM-Timer: 96ms instead of 100ms
Apr 15 09:17:26 emperor kernel: [ 0.076000] APIC delta adjusted to PM-Timer:
2083089 (2004399)
Apr 15 09:17:26 emperor kernel: [ 0.076000] Performance Events: PEBS fmt0+,
4-deep LBR, Core2 events, Intel PMU driver.
Apr 15 09:17:26 emperor kernel: [ 0.076000] ... version: 2
Apr 15 09:17:26 emperor kernel: [ 0.076000] ... bit width: 40
Apr 15 09:17:26 emperor kernel: [ 0.076000] ... generic registers: 2
Apr 15 09:17:26 emperor kernel: [ 0.076000] ... value mask:
000000ffffffffff
Apr 15 09:17:26 emperor kernel: [ 0.076000] ... max period:
000000007fffffff
Apr 15 09:17:26 emperor kernel: [ 0.076000] ... fixed-purpose events: 3
Apr 15 09:17:26 emperor kernel: [ 0.076000] ... event mask:
0000000700000003
Apr 15 09:17:26 emperor kernel: [ 0.076000] x86: Booting SMP configuration:
Apr 15 09:17:26 emperor kernel: [ 0.076000] .... node #0, CPUs: #1
Apr 15 09:17:26 emperor kernel: [ 0.086693] NMI watchdog: enabled on all
CPUs, permanently consumes one hw-PMU counter.
Apr 15 09:17:26 emperor kernel: [ 0.086814] #2 #3
Apr 15 09:17:26 emperor kernel: [ 0.112010] x86: Booted up 1 node, 4 CPUs
Apr 15 09:17:26 emperor kernel: [ 0.112012] smpboot: Total of 4 processors
activated (23999.81 BogoMIPS)
Apr 15 09:17:26 emperor kernel: [ 0.116144] devtmpfs: initialized
Apr 15 09:17:26 emperor kernel: [ 0.121839] PM: Registering ACPI NVS region
[mem 0xcff8e000-0xcffdffff] (335872 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.121839] pinctrl core: initialized
pinctrl subsystem
Apr 15 09:17:26 emperor kernel: [ 0.121839] NET: Registered protocol family
16
Apr 15 09:17:26 emperor kernel: [ 0.121839] cpuidle: using governor ladder
Apr 15 09:17:26 emperor kernel: [ 0.121839] cpuidle: using governor menu
Apr 15 09:17:26 emperor kernel: [ 0.121839] ACPI: bus type PCI registered
Apr 15 09:17:26 emperor kernel: [ 0.121839] acpiphp: ACPI Hot Plug PCI
Controller Driver version: 0.5
Apr 15 09:17:26 emperor kernel: [ 0.121839] PCI: MMCONFIG for domain 0000
[bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Apr 15 09:17:26 emperor kernel: [ 0.121839] PCI: not using MMCONFIG
Apr 15 09:17:26 emperor kernel: [ 0.121839] PCI: Using configuration type 1
for base access
Apr 15 09:17:26 emperor kernel: [ 0.132102] ACPI: Added _OSI(Module Device)
Apr 15 09:17:26 emperor kernel: [ 0.132102] ACPI: Added _OSI(Processor
Device)
Apr 15 09:17:26 emperor kernel: [ 0.132102] ACPI: Added _OSI(3.0 _SCP
Extensions)
Apr 15 09:17:26 emperor kernel: [ 0.132102] ACPI: Added _OSI(Processor
Aggregator Device)
Apr 15 09:17:26 emperor kernel: [ 0.133486] ACPI: Executed 1 blocks of
module-level executable AML code
Apr 15 09:17:26 emperor kernel: [ 0.137963] ACPI: Dynamic OEM Table Load:
Apr 15 09:17:26 emperor kernel: [ 0.137968] ACPI: SSDT 0xFFFF880226849600
0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
Apr 15 09:17:26 emperor kernel: [ 0.138280] ACPI: Dynamic OEM Table Load:
Apr 15 09:17:26 emperor kernel: [ 0.138283] ACPI: SSDT 0xFFFF880226849400
000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
Apr 15 09:17:26 emperor kernel: [ 0.138585] ACPI: Dynamic OEM Table Load:
Apr 15 09:17:26 emperor kernel: [ 0.138589] ACPI: SSDT 0xFFFF880226849200
000143 (v01 AMI CPU3PM 00000001 INTL 20060113)
Apr 15 09:17:26 emperor kernel: [ 0.138890] ACPI: Dynamic OEM Table Load:
Apr 15 09:17:26 emperor kernel: [ 0.138894] ACPI: SSDT 0xFFFF880226849000
000143 (v01 AMI CPU4PM 00000001 INTL 20060113)
Apr 15 09:17:26 emperor kernel: [ 0.139178] ACPI: Interpreter enabled
Apr 15 09:17:26 emperor kernel: [ 0.139185] ACPI Exception: AE_NOT_FOUND,
While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
Apr 15 09:17:26 emperor kernel: [ 0.139195] ACPI: (supports S0 S1 S3 S4 S5)
Apr 15 09:17:26 emperor kernel: [ 0.139197] ACPI: Using IOAPIC for interrupt
routing
Apr 15 09:17:26 emperor kernel: [ 0.139212] PCI: MMCONFIG for domain 0000
[bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Apr 15 09:17:26 emperor kernel: [ 0.139577] PCI: MMCONFIG at [mem
0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Apr 15 09:17:26 emperor kernel: [ 0.140020] PCI: Using host bridge windows
from ACPI; if necessary, use "pci=nocrs" and report a bug
Apr 15 09:17:26 emperor kernel: [ 0.144967] ACPI: PCI Root Bridge [PCI0]
(domain 0000 [bus 00-ff])
Apr 15 09:17:26 emperor kernel: [ 0.144972] acpi PNP0A08:00: _OSC: OS
supports [ExtendedConfig ASPM ClockPM Segments MSI]
Apr 15 09:17:26 emperor kernel: [ 0.144976] acpi PNP0A08:00: _OSC failed
(AE_NOT_FOUND); disabling ASPM
Apr 15 09:17:26 emperor kernel: [ 0.145183] PCI host bridge to bus 0000:00
Apr 15 09:17:26 emperor kernel: [ 0.145186] pci_bus 0000:00: root bus
resource [bus 00-ff]
Apr 15 09:17:26 emperor kernel: [ 0.145188] pci_bus 0000:00: root bus
resource [io 0x0000-0x0cf7]
Apr 15 09:17:26 emperor kernel: [ 0.145189] pci_bus 0000:00: root bus
resource [io 0x0d00-0xffff]
Apr 15 09:17:26 emperor kernel: [ 0.145191] pci_bus 0000:00: root bus
resource [mem 0x000a0000-0x000bffff]
Apr 15 09:17:26 emperor kernel: [ 0.145192] pci_bus 0000:00: root bus
resource [mem 0x000d0000-0x000dffff]
Apr 15 09:17:26 emperor kernel: [ 0.145194] pci_bus 0000:00: root bus
resource [mem 0xd0000000-0xffffffff]
Apr 15 09:17:26 emperor kernel: [ 0.145201] pci 0000:00:00.0: [8086:29e0]
type 00 class 0x060000
Apr 15 09:17:26 emperor kernel: [ 0.145279] pci 0000:00:01.0: [8086:29e1]
type 01 class 0x060400
Apr 15 09:17:26 emperor kernel: [ 0.145308] pci 0000:00:01.0: PME# supported
from D0 D3hot D3cold
Apr 15 09:17:26 emperor kernel: [ 0.145339] pci 0000:00:01.0: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.145396] pci 0000:00:1a.0: [8086:2937]
type 00 class 0x0c0300
Apr 15 09:17:26 emperor kernel: [ 0.145431] pci 0000:00:1a.0: reg 0x20: [io
0xb800-0xb81f]
Apr 15 09:17:26 emperor kernel: [ 0.145501] pci 0000:00:1a.0: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.145541] pci 0000:00:1a.1: [8086:2938]
type 00 class 0x0c0300
Apr 15 09:17:26 emperor kernel: [ 0.145575] pci 0000:00:1a.1: reg 0x20: [io
0xb880-0xb89f]
Apr 15 09:17:26 emperor kernel: [ 0.145643] pci 0000:00:1a.1: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.145684] pci 0000:00:1a.2: [8086:2939]
type 00 class 0x0c0300
Apr 15 09:17:26 emperor kernel: [ 0.145717] pci 0000:00:1a.2: reg 0x20: [io
0xbc00-0xbc1f]
Apr 15 09:17:26 emperor kernel: [ 0.145787] pci 0000:00:1a.2: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.145834] pci 0000:00:1a.7: [8086:293c]
type 00 class 0x0c0320
Apr 15 09:17:26 emperor kernel: [ 0.145852] pci 0000:00:1a.7: reg 0x10: [mem
0xfe8ffc00-0xfe8fffff]
Apr 15 09:17:26 emperor kernel: [ 0.145925] pci 0000:00:1a.7: PME# supported
from D0 D3hot D3cold
Apr 15 09:17:26 emperor kernel: [ 0.145961] pci 0000:00:1a.7: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.146004] pci 0000:00:1b.0: [8086:293e]
type 00 class 0x040300
Apr 15 09:17:26 emperor kernel: [ 0.146017] pci 0000:00:1b.0: reg 0x10: [mem
0xfe8f8000-0xfe8fbfff 64bit]
Apr 15 09:17:26 emperor kernel: [ 0.146074] pci 0000:00:1b.0: PME# supported
from D0 D3hot D3cold
Apr 15 09:17:26 emperor kernel: [ 0.146143] pci 0000:00:1c.0: [8086:2940]
type 01 class 0x060400
Apr 15 09:17:26 emperor kernel: [ 0.146201] pci 0000:00:1c.0: PME# supported
from D0 D3hot D3cold
Apr 15 09:17:26 emperor kernel: [ 0.146237] pci 0000:00:1c.0: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.146279] pci 0000:00:1c.4: [8086:2948]
type 01 class 0x060400
Apr 15 09:17:26 emperor kernel: [ 0.146337] pci 0000:00:1c.4: PME# supported
from D0 D3hot D3cold
Apr 15 09:17:26 emperor kernel: [ 0.146373] pci 0000:00:1c.4: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.146412] pci 0000:00:1c.5: [8086:294a]
type 01 class 0x060400
Apr 15 09:17:26 emperor kernel: [ 0.146471] pci 0000:00:1c.5: PME# supported
from D0 D3hot D3cold
Apr 15 09:17:26 emperor kernel: [ 0.146506] pci 0000:00:1c.5: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.146547] pci 0000:00:1d.0: [8086:2934]
type 00 class 0x0c0300
Apr 15 09:17:26 emperor kernel: [ 0.146581] pci 0000:00:1d.0: reg 0x20: [io
0xb080-0xb09f]
Apr 15 09:17:26 emperor kernel: [ 0.146649] pci 0000:00:1d.0: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.146689] pci 0000:00:1d.1: [8086:2935]
type 00 class 0x0c0300
Apr 15 09:17:26 emperor kernel: [ 0.146723] pci 0000:00:1d.1: reg 0x20: [io
0xb400-0xb41f]
Apr 15 09:17:26 emperor kernel: [ 0.146793] pci 0000:00:1d.1: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.146834] pci 0000:00:1d.2: [8086:2936]
type 00 class 0x0c0300
Apr 15 09:17:26 emperor kernel: [ 0.146868] pci 0000:00:1d.2: reg 0x20: [io
0xb480-0xb49f]
Apr 15 09:17:26 emperor kernel: [ 0.146936] pci 0000:00:1d.2: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.146984] pci 0000:00:1d.7: [8086:293a]
type 00 class 0x0c0320
Apr 15 09:17:26 emperor kernel: [ 0.147001] pci 0000:00:1d.7: reg 0x10: [mem
0xfe8ff800-0xfe8ffbff]
Apr 15 09:17:26 emperor kernel: [ 0.147074] pci 0000:00:1d.7: PME# supported
from D0 D3hot D3cold
Apr 15 09:17:26 emperor kernel: [ 0.147110] pci 0000:00:1d.7: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.147149] pci 0000:00:1e.0: [8086:244e]
type 01 class 0x060401
Apr 15 09:17:26 emperor kernel: [ 0.147215] pci 0000:00:1e.0: System wakeup
disabled by ACPI
Apr 15 09:17:26 emperor kernel: [ 0.147256] pci 0000:00:1f.0: [8086:2916]
type 00 class 0x060100
Apr 15 09:17:26 emperor kernel: [ 0.147321] pci 0000:00:1f.0: can't claim
BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io
0x0810-0x0815]
Apr 15 09:17:26 emperor kernel: [ 0.147325] pci 0000:00:1f.0: quirk: [io
0x0480-0x04bf] claimed by ICH6 GPIO
Apr 15 09:17:26 emperor kernel: [ 0.147328] pci 0000:00:1f.0: ICH7 LPC
Generic IO decode 1 PIO at 0294 (mask 0003)
Apr 15 09:17:26 emperor kernel: [ 0.147417] pci 0000:00:1f.2: [8086:2922]
type 00 class 0x010601
Apr 15 09:17:26 emperor kernel: [ 0.147432] pci 0000:00:1f.2: reg 0x10: [io
0xac00-0xac07]
Apr 15 09:17:26 emperor kernel: [ 0.147438] pci 0000:00:1f.2: reg 0x14: [io
0xa880-0xa883]
Apr 15 09:17:26 emperor kernel: [ 0.147444] pci 0000:00:1f.2: reg 0x18: [io
0xa800-0xa807]
Apr 15 09:17:26 emperor kernel: [ 0.147451] pci 0000:00:1f.2: reg 0x1c: [io
0xa480-0xa483]
Apr 15 09:17:26 emperor kernel: [ 0.147457] pci 0000:00:1f.2: reg 0x20: [io
0xa400-0xa41f]
Apr 15 09:17:26 emperor kernel: [ 0.147463] pci 0000:00:1f.2: reg 0x24: [mem
0xfe8fe800-0xfe8fefff]
Apr 15 09:17:26 emperor kernel: [ 0.147499] pci 0000:00:1f.2: PME# supported
from D3hot
Apr 15 09:17:26 emperor kernel: [ 0.147570] pci 0000:00:1f.3: [8086:2930]
type 00 class 0x0c0500
Apr 15 09:17:26 emperor kernel: [ 0.147582] pci 0000:00:1f.3: reg 0x10: [mem
0xfe8ff400-0xfe8ff4ff 64bit]
Apr 15 09:17:26 emperor kernel: [ 0.147599] pci 0000:00:1f.3: reg 0x20: [io
0x0400-0x041f]
Apr 15 09:17:26 emperor kernel: [ 0.147702] pci 0000:01:00.0: [1002:68d8]
type 00 class 0x030000
Apr 15 09:17:26 emperor kernel: [ 0.147714] pci 0000:01:00.0: reg 0x10: [mem
0xd0000000-0xdfffffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.147722] pci 0000:01:00.0: reg 0x18: [mem
0xfe9c0000-0xfe9dffff 64bit]
Apr 15 09:17:26 emperor kernel: [ 0.147728] pci 0000:01:00.0: reg 0x20: [io
0xc000-0xc0ff]
Apr 15 09:17:26 emperor kernel: [ 0.147738] pci 0000:01:00.0: reg 0x30: [mem
0xfe9a0000-0xfe9bffff pref]
Apr 15 09:17:26 emperor kernel: [ 0.147765] pci 0000:01:00.0: supports D1 D2
Apr 15 09:17:26 emperor kernel: [ 0.147807] pci 0000:01:00.1: [1002:aa60]
type 00 class 0x040300
Apr 15 09:17:26 emperor kernel: [ 0.147818] pci 0000:01:00.1: reg 0x10: [mem
0xfe9fc000-0xfe9fffff 64bit]
Apr 15 09:17:26 emperor kernel: [ 0.148003] pci 0000:01:00.1: supports D1 D2
Apr 15 09:17:26 emperor kernel: [ 0.148053] pci 0000:00:01.0: PCI bridge to
[bus 01]
Apr 15 09:17:26 emperor kernel: [ 0.148055] pci 0000:00:01.0: bridge
window [io 0xc000-0xcfff]
Apr 15 09:17:26 emperor kernel: [ 0.148058] pci 0000:00:01.0: bridge
window [mem 0xfe900000-0xfe9fffff]
Apr 15 09:17:26 emperor kernel: [ 0.148060] pci 0000:00:01.0: bridge
window [mem 0xd0000000-0xdfffffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.148106] pci 0000:00:1c.0: PCI bridge to
[bus 04]
Apr 15 09:17:26 emperor kernel: [ 0.148113] pci 0000:00:1c.0: bridge
window [mem 0xfdf00000-0xfdffffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.148173] pci 0000:03:00.0: [11ab:6121]
type 00 class 0x01018f
Apr 15 09:17:26 emperor kernel: [ 0.148190] pci 0000:03:00.0: reg 0x10: [io
0xec00-0xec07]
Apr 15 09:17:26 emperor kernel: [ 0.148200] pci 0000:03:00.0: reg 0x14: [io
0xe880-0xe883]
Apr 15 09:17:26 emperor kernel: [ 0.148210] pci 0000:03:00.0: reg 0x18: [io
0xe800-0xe807]
Apr 15 09:17:26 emperor kernel: [ 0.148221] pci 0000:03:00.0: reg 0x1c: [io
0xe480-0xe483]
Apr 15 09:17:26 emperor kernel: [ 0.148231] pci 0000:03:00.0: reg 0x20: [io
0xe400-0xe40f]
Apr 15 09:17:26 emperor kernel: [ 0.148241] pci 0000:03:00.0: reg 0x24: [mem
0xfebffc00-0xfebfffff]
Apr 15 09:17:26 emperor kernel: [ 0.148300] pci 0000:03:00.0: supports D1
Apr 15 09:17:26 emperor kernel: [ 0.148302] pci 0000:03:00.0: PME# supported
from D0 D1 D3hot
Apr 15 09:17:26 emperor kernel: [ 0.148350] pci 0000:03:00.0: disabling ASPM
on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Apr 15 09:17:26 emperor kernel: [ 0.148357] pci 0000:00:1c.4: PCI bridge to
[bus 03]
Apr 15 09:17:26 emperor kernel: [ 0.148360] pci 0000:00:1c.4: bridge
window [io 0xe000-0xefff]
Apr 15 09:17:26 emperor kernel: [ 0.148363] pci 0000:00:1c.4: bridge
window [mem 0xfeb00000-0xfebfffff]
Apr 15 09:17:26 emperor kernel: [ 0.148429] pci 0000:02:00.0: [11ab:4364]
type 00 class 0x020000
Apr 15 09:17:26 emperor kernel: [ 0.148451] pci 0000:02:00.0: reg 0x10: [mem
0xfeafc000-0xfeafffff 64bit]
Apr 15 09:17:26 emperor kernel: [ 0.148461] pci 0000:02:00.0: reg 0x18: [io
0xd800-0xd8ff]
Apr 15 09:17:26 emperor kernel: [ 0.148498] pci 0000:02:00.0: reg 0x30: [mem
0xfeac0000-0xfeadffff pref]
Apr 15 09:17:26 emperor kernel: [ 0.148560] pci 0000:02:00.0: supports D1 D2
Apr 15 09:17:26 emperor kernel: [ 0.148561] pci 0000:02:00.0: PME# supported
from D0 D1 D2 D3hot D3cold
Apr 15 09:17:26 emperor kernel: [ 0.156016] pci 0000:00:1c.5: PCI bridge to
[bus 02]
Apr 15 09:17:26 emperor kernel: [ 0.156021] pci 0000:00:1c.5: bridge
window [io 0xd000-0xdfff]
Apr 15 09:17:26 emperor kernel: [ 0.156025] pci 0000:00:1c.5: bridge
window [mem 0xfea00000-0xfeafffff]
Apr 15 09:17:26 emperor kernel: [ 0.156107] pci 0000:00:1e.0: PCI bridge to
[bus 05] (subtractive decode)
Apr 15 09:17:26 emperor kernel: [ 0.156117] pci 0000:00:1e.0: bridge
window [io 0x0000-0x0cf7] (subtractive decode)
Apr 15 09:17:26 emperor kernel: [ 0.156119] pci 0000:00:1e.0: bridge
window [io 0x0d00-0xffff] (subtractive decode)
Apr 15 09:17:26 emperor kernel: [ 0.156122] pci 0000:00:1e.0: bridge
window [mem 0x000a0000-0x000bffff] (subtractive decode)
Apr 15 09:17:26 emperor kernel: [ 0.156124] pci 0000:00:1e.0: bridge
window [mem 0x000d0000-0x000dffff] (subtractive decode)
Apr 15 09:17:26 emperor kernel: [ 0.156127] pci 0000:00:1e.0: bridge
window [mem 0xd0000000-0xffffffff] (subtractive decode)
Apr 15 09:17:26 emperor kernel: [ 0.156896] ACPI: PCI Interrupt Link [LNKA]
(IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 15 09:17:26 emperor kernel: [ 0.156941] ACPI: PCI Interrupt Link [LNKB]
(IRQs 3 4 5 6 7 *10 11 12 14 15)
Apr 15 09:17:26 emperor kernel: [ 0.156984] ACPI: PCI Interrupt Link [LNKC]
(IRQs 3 4 5 6 7 10 11 12 14 *15)
Apr 15 09:17:26 emperor kernel: [ 0.157027] ACPI: PCI Interrupt Link [LNKD]
(IRQs 3 *4 5 6 7 10 11 12 14 15)
Apr 15 09:17:26 emperor kernel: [ 0.157069] ACPI: PCI Interrupt Link [LNKE]
(IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 15 09:17:26 emperor kernel: [ 0.157113] ACPI: PCI Interrupt Link [LNKF]
(IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 15 09:17:26 emperor kernel: [ 0.157155] ACPI: PCI Interrupt Link [LNKG]
(IRQs *3 4 5 6 7 10 11 12 14 15)
Apr 15 09:17:26 emperor kernel: [ 0.157198] ACPI: PCI Interrupt Link [LNKH]
(IRQs 3 4 5 6 *7 10 11 12 14 15)
Apr 15 09:17:26 emperor kernel: [ 0.157250] ACPI: Enabled 3 GPEs in block 00
to 3F
Apr 15 09:17:26 emperor kernel: [ 0.157317] vgaarb: setting as boot device:
PCI:0000:01:00.0
Apr 15 09:17:26 emperor kernel: [ 0.157317] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Apr 15 09:17:26 emperor kernel: [ 0.157317] vgaarb: loaded
Apr 15 09:17:26 emperor kernel: [ 0.157317] vgaarb: bridge control possible
0000:01:00.0
Apr 15 09:17:26 emperor kernel: [ 0.157317] PCI: Using ACPI for IRQ routing
Apr 15 09:17:26 emperor kernel: [ 0.162128] PCI: pci_cache_line_size set to
64 bytes
Apr 15 09:17:26 emperor kernel: [ 0.162170] e820: reserve RAM buffer [mem
0x0009e800-0x0009ffff]
Apr 15 09:17:26 emperor kernel: [ 0.162171] e820: reserve RAM buffer [mem
0xcff80000-0xcfffffff]
Apr 15 09:17:26 emperor kernel: [ 0.162283] HPET: 4 timers in total, 0
timers will be used for per-cpu timer
Apr 15 09:17:26 emperor kernel: [ 0.162286] hpet0: at MMIO 0xfed00000, IRQs
2, 8, 0, 0
Apr 15 09:17:26 emperor kernel: [ 0.162290] hpet0: 4 comparators, 64-bit
14.318180 MHz counter
Apr 15 09:17:26 emperor kernel: [ 0.164031] Switched to clocksource hpet
Apr 15 09:17:26 emperor kernel: [ 0.170022] pnp: PnP ACPI init
Apr 15 09:17:26 emperor kernel: [ 0.170034] ACPI: bus type PNP registered
Apr 15 09:17:26 emperor kernel: [ 0.170103] system 00:00: [mem
0xfed14000-0xfed19fff] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170106] system 00:00: Plug and Play ACPI
device, IDs PNP0c01 (active)
Apr 15 09:17:26 emperor kernel: [ 0.170167] pnp 00:01: Plug and Play ACPI
device, IDs PNP0b00 (active)
Apr 15 09:17:26 emperor kernel: [ 0.170303] system 00:02: [io
0x0290-0x0297] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170306] system 00:02: Plug and Play ACPI
device, IDs PNP0c02 (active)
Apr 15 09:17:26 emperor kernel: [ 0.170433] system 00:03: [io
0x04d0-0x04d1] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170436] system 00:03: [io
0x0800-0x087f] could not be reserved
Apr 15 09:17:26 emperor kernel: [ 0.170438] system 00:03: [io
0x0480-0x04bf] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170440] system 00:03: [mem
0xfed1c000-0xfed1ffff] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170442] system 00:03: [mem
0xfed20000-0xfed3ffff] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170444] system 00:03: [mem
0xfed50000-0xfed8ffff] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170446] system 00:03: [mem
0xffa00000-0xffafffff] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170448] system 00:03: [mem
0xffb00000-0xffbfffff] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170450] system 00:03: [mem
0xffe00000-0xffefffff] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170452] system 00:03: [mem
0xfff00000-0xfffffffe] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170454] system 00:03: Plug and Play ACPI
device, IDs PNP0c02 (active)
Apr 15 09:17:26 emperor kernel: [ 0.170616] system 00:04: [mem
0xfec00000-0xfec00fff] could not be reserved
Apr 15 09:17:26 emperor kernel: [ 0.170619] system 00:04: [mem
0xfee00000-0xfee00fff] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170621] system 00:04: Plug and Play ACPI
device, IDs PNP0c02 (active)
Apr 15 09:17:26 emperor kernel: [ 0.170672] pnp 00:05: Plug and Play ACPI
device, IDs PNP0303 PNP030b (active)
Apr 15 09:17:26 emperor kernel: [ 0.170725] system 00:06: [mem
0xe0000000-0xefffffff] has been reserved
Apr 15 09:17:26 emperor kernel: [ 0.170728] system 00:06: Plug and Play ACPI
device, IDs PNP0c02 (active)
Apr 15 09:17:26 emperor kernel: [ 0.171112] system 00:07: [mem
0x00000000-0x0009ffff] could not be reserved
Apr 15 09:17:26 emperor kernel: [ 0.171114] system 00:07: [mem
0x000c0000-0x000cffff] could not be reserved
Apr 15 09:17:26 emperor kernel: [ 0.171116] system 00:07: [mem
0x000e0000-0x000fffff] could not be reserved
Apr 15 09:17:26 emperor kernel: [ 0.171118] system 00:07: [mem
0x00100000-0xcfffffff] could not be reserved
Apr 15 09:17:26 emperor kernel: [ 0.171121] system 00:07: Plug and Play ACPI
device, IDs PNP0c01 (active)
Apr 15 09:17:26 emperor kernel: [ 0.171215] pnp: PnP ACPI: found 8 devices
Apr 15 09:17:26 emperor kernel: [ 0.171216] ACPI: bus type PNP unregistered
Apr 15 09:17:26 emperor kernel: [ 0.179500] pci 0000:00:1c.0: bridge window
[io 0x1000-0x0fff] to [bus 04] add_size 1000
Apr 15 09:17:26 emperor kernel: [ 0.179503] pci 0000:00:1c.0: bridge window
[mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
Apr 15 09:17:26 emperor kernel: [ 0.179510] pci 0000:00:1c.4: bridge window
[mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
Apr 15 09:17:26 emperor kernel: [ 0.179516] pci 0000:00:1c.5: bridge window
[mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
Apr 15 09:17:26 emperor kernel: [ 0.179524] pci 0000:00:1f.0: BAR 13: [io
0x0800-0x087f] has bogus alignment
Apr 15 09:17:26 emperor kernel: [ 0.179527] pci 0000:00:1c.0: res[14]=[mem
0x00100000-0x000fffff] get_res_add_size add_size 400000
Apr 15 09:17:26 emperor kernel: [ 0.179529] pci 0000:00:1c.4: res[15]=[mem
0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Apr 15 09:17:26 emperor kernel: [ 0.179531] pci 0000:00:1c.5: res[15]=[mem
0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Apr 15 09:17:26 emperor kernel: [ 0.179533] pci 0000:00:1c.0: res[13]=[io
0x1000-0x0fff] get_res_add_size add_size 1000
Apr 15 09:17:26 emperor kernel: [ 0.179537] pci 0000:00:1c.0: BAR 14:
assigned [mem 0xf0000000-0xf03fffff]
Apr 15 09:17:26 emperor kernel: [ 0.179541] pci 0000:00:1c.4: BAR 15:
assigned [mem 0xf0400000-0xf05fffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.179545] pci 0000:00:1c.5: BAR 15:
assigned [mem 0xf0600000-0xf07fffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.179547] pci 0000:00:1c.0: BAR 13:
assigned [io 0x1000-0x1fff]
Apr 15 09:17:26 emperor kernel: [ 0.179550] pci 0000:00:01.0: PCI bridge to
[bus 01]
Apr 15 09:17:26 emperor kernel: [ 0.179552] pci 0000:00:01.0: bridge
window [io 0xc000-0xcfff]
Apr 15 09:17:26 emperor kernel: [ 0.179555] pci 0000:00:01.0: bridge
window [mem 0xfe900000-0xfe9fffff]
Apr 15 09:17:26 emperor kernel: [ 0.179557] pci 0000:00:01.0: bridge
window [mem 0xd0000000-0xdfffffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.179560] pci 0000:00:1c.0: PCI bridge to
[bus 04]
Apr 15 09:17:26 emperor kernel: [ 0.179562] pci 0000:00:1c.0: bridge
window [io 0x1000-0x1fff]
Apr 15 09:17:26 emperor kernel: [ 0.179566] pci 0000:00:1c.0: bridge
window [mem 0xf0000000-0xf03fffff]
Apr 15 09:17:26 emperor kernel: [ 0.179569] pci 0000:00:1c.0: bridge
window [mem 0xfdf00000-0xfdffffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.179573] pci 0000:00:1c.4: PCI bridge to
[bus 03]
Apr 15 09:17:26 emperor kernel: [ 0.179575] pci 0000:00:1c.4: bridge
window [io 0xe000-0xefff]
Apr 15 09:17:26 emperor kernel: [ 0.179579] pci 0000:00:1c.4: bridge
window [mem 0xfeb00000-0xfebfffff]
Apr 15 09:17:26 emperor kernel: [ 0.179582] pci 0000:00:1c.4: bridge
window [mem 0xf0400000-0xf05fffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.179586] pci 0000:00:1c.5: PCI bridge to
[bus 02]
Apr 15 09:17:26 emperor kernel: [ 0.179588] pci 0000:00:1c.5: bridge
window [io 0xd000-0xdfff]
Apr 15 09:17:26 emperor kernel: [ 0.179592] pci 0000:00:1c.5: bridge
window [mem 0xfea00000-0xfeafffff]
Apr 15 09:17:26 emperor kernel: [ 0.179595] pci 0000:00:1c.5: bridge
window [mem 0xf0600000-0xf07fffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.179599] pci 0000:00:1e.0: PCI bridge to
[bus 05]
Apr 15 09:17:26 emperor kernel: [ 0.179608] pci_bus 0000:00: resource 4 [io
0x0000-0x0cf7]
Apr 15 09:17:26 emperor kernel: [ 0.179609] pci_bus 0000:00: resource 5 [io
0x0d00-0xffff]
Apr 15 09:17:26 emperor kernel: [ 0.179611] pci_bus 0000:00: resource 6 [mem
0x000a0000-0x000bffff]
Apr 15 09:17:26 emperor kernel: [ 0.179612] pci_bus 0000:00: resource 7 [mem
0x000d0000-0x000dffff]
Apr 15 09:17:26 emperor kernel: [ 0.179614] pci_bus 0000:00: resource 8 [mem
0xd0000000-0xffffffff]
Apr 15 09:17:26 emperor kernel: [ 0.179616] pci_bus 0000:01: resource 0 [io
0xc000-0xcfff]
Apr 15 09:17:26 emperor kernel: [ 0.179617] pci_bus 0000:01: resource 1 [mem
0xfe900000-0xfe9fffff]
Apr 15 09:17:26 emperor kernel: [ 0.179619] pci_bus 0000:01: resource 2 [mem
0xd0000000-0xdfffffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.179621] pci_bus 0000:04: resource 0 [io
0x1000-0x1fff]
Apr 15 09:17:26 emperor kernel: [ 0.179622] pci_bus 0000:04: resource 1 [mem
0xf0000000-0xf03fffff]
Apr 15 09:17:26 emperor kernel: [ 0.179624] pci_bus 0000:04: resource 2 [mem
0xfdf00000-0xfdffffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.179626] pci_bus 0000:03: resource 0 [io
0xe000-0xefff]
Apr 15 09:17:26 emperor kernel: [ 0.179627] pci_bus 0000:03: resource 1 [mem
0xfeb00000-0xfebfffff]
Apr 15 09:17:26 emperor kernel: [ 0.179629] pci_bus 0000:03: resource 2 [mem
0xf0400000-0xf05fffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.179631] pci_bus 0000:02: resource 0 [io
0xd000-0xdfff]
Apr 15 09:17:26 emperor kernel: [ 0.179632] pci_bus 0000:02: resource 1 [mem
0xfea00000-0xfeafffff]
Apr 15 09:17:26 emperor kernel: [ 0.179634] pci_bus 0000:02: resource 2 [mem
0xf0600000-0xf07fffff 64bit pref]
Apr 15 09:17:26 emperor kernel: [ 0.179636] pci_bus 0000:05: resource 4 [io
0x0000-0x0cf7]
Apr 15 09:17:26 emperor kernel: [ 0.179637] pci_bus 0000:05: resource 5 [io
0x0d00-0xffff]
Apr 15 09:17:26 emperor kernel: [ 0.179639] pci_bus 0000:05: resource 6 [mem
0x000a0000-0x000bffff]
Apr 15 09:17:26 emperor kernel: [ 0.179640] pci_bus 0000:05: resource 7 [mem
0x000d0000-0x000dffff]
Apr 15 09:17:26 emperor kernel: [ 0.179642] pci_bus 0000:05: resource 8 [mem
0xd0000000-0xffffffff]
Apr 15 09:17:26 emperor kernel: [ 0.179726] NET: Registered protocol family
2
Apr 15 09:17:26 emperor kernel: [ 0.180051] TCP established hash table
entries: 65536 (order: 7, 524288 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.180347] TCP bind hash table entries:
65536 (order: 8, 1048576 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.180839] TCP: Hash tables configured
(established 65536 bind 65536)
Apr 15 09:17:26 emperor kernel: [ 0.180886] TCP: reno registered
Apr 15 09:17:26 emperor kernel: [ 0.180896] UDP hash table entries: 4096
(order: 5, 131072 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.180965] UDP-Lite hash table entries:
4096 (order: 5, 131072 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.181106] NET: Registered protocol family
1
Apr 15 09:17:26 emperor kernel: [ 0.181926] pci 0000:01:00.0: Video device
with shadowed ROM
Apr 15 09:17:26 emperor kernel: [ 0.181933] PCI: CLS 32 bytes, default 64
Apr 15 09:17:26 emperor kernel: [ 0.181979] Unpacking initramfs...
Apr 15 09:17:26 emperor kernel: [ 0.436477] Freeing initrd memory: 15364K
(ffff8800361ee000 - ffff8800370ef000)
Apr 15 09:17:26 emperor kernel: [ 0.436511] PCI-DMA: Using software bounce
buffering for IO (SWIOTLB)
Apr 15 09:17:26 emperor kernel: [ 0.436514] software IO TLB [mem
0xcbf80000-0xcff80000] (64MB) mapped at [ffff8800cbf80000-ffff8800cff7ffff]
Apr 15 09:17:26 emperor kernel: [ 0.436780] microcode: CPU0 sig=0x1067a,
pf=0x10, revision=0xa07
Apr 15 09:17:26 emperor kernel: [ 0.436784] microcode: CPU1 sig=0x1067a,
pf=0x10, revision=0xa07
Apr 15 09:17:26 emperor kernel: [ 0.436798] microcode: CPU2 sig=0x1067a,
pf=0x10, revision=0xa07
Apr 15 09:17:26 emperor kernel: [ 0.436812] microcode: CPU3 sig=0x1067a,
pf=0x10, revision=0xa07
Apr 15 09:17:26 emperor kernel: [ 0.436893] microcode: Microcode Update
Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
Apr 15 09:17:26 emperor kernel: [ 0.437182] futex hash table entries: 1024
(order: 4, 65536 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.437223] audit: initializing netlink
subsys (disabled)
Apr 15 09:17:26 emperor kernel: [ 0.437242] audit: type=2000
audit(1460704631.436:1): initialized
Apr 15 09:17:26 emperor kernel: [ 0.437593] HugeTLB registered 2 MB page
size, pre-allocated 0 pages
Apr 15 09:17:26 emperor kernel: [ 0.437611] zbud: loaded
Apr 15 09:17:26 emperor kernel: [ 0.437854] VFS: Disk quotas dquot_6.5.2
Apr 15 09:17:26 emperor kernel: [ 0.437880] Dquot-cache hash table entries:
512 (order 0, 4096 bytes)
Apr 15 09:17:26 emperor kernel: [ 0.437935] msgmni has been set to 16001
Apr 15 09:17:26 emperor kernel: [ 0.438317] alg: No test for stdrng (krng)
Apr 15 09:17:26 emperor kernel: [ 0.438348] Block layer SCSI generic (bsg)
driver version 0.4 loaded (major 252)
Apr 15 09:17:26 emperor kernel: [ 0.438411] io scheduler noop registered
Apr 15 09:17:26 emperor kernel: [ 0.438413] io scheduler deadline registered
Apr 15 09:17:26 emperor kernel: [ 0.438457] io scheduler cfq registered
(default)
Apr 15 09:17:26 emperor kernel: [ 0.438620] pcieport 0000:00:01.0: irq 40
for MSI/MSI-X
Apr 15 09:17:26 emperor kernel: [ 0.438662] pcieport 0000:00:1c.0: enabling
device (0106 -> 0107)
Apr 15 09:17:26 emperor kernel: [ 0.438720] pcieport 0000:00:1c.0: irq 41
for MSI/MSI-X
Apr 15 09:17:26 emperor kernel: [ 0.438827] pcieport 0000:00:1c.4: irq 42
for MSI/MSI-X
Apr 15 09:17:26 emperor kernel: [ 0.438934] pcieport 0000:00:1c.5: irq 43
for MSI/MSI-X
Apr 15 09:17:26 emperor kernel: [ 0.439014] pci_hotplug: PCI Hot Plug PCI
Core version: 0.5
Apr 15 09:17:26 emperor kernel: [ 0.439030] pciehp: PCI Express Hot Plug
Controller Driver version: 0.4
Apr 15 09:17:26 emperor kernel: [ 0.439042] vesafb: mode is 800x600x8,
linelength=832, pages=0
Apr 15 09:17:26 emperor kernel: [ 0.439043] vesafb: scrolling: redraw
Apr 15 09:17:26 emperor kernel: [ 0.439044] vesafb: Pseudocolor:
size=0:6:6:6, shift=0:0:0:0
Apr 15 09:17:26 emperor kernel: [ 0.439053] vesafb: framebuffer at
0xd0000000, mapped to 0xffffc90010e80000, using 512k, total 512k
Apr 15 09:17:26 emperor kernel: [ 0.442266] Console: switching to colour
frame buffer device 100x37
Apr 15 09:17:26 emperor kernel: [ 0.445371] fb0: VESA VGA frame buffer
device
Apr 15 09:17:26 emperor kernel: [ 0.445385] intel_idle: does not run on
family 6 model 23
Apr 15 09:17:26 emperor kernel: [ 0.445418] GHES: HEST is not enabled!
Apr 15 09:17:26 emperor kernel: [ 0.445476] Serial: 8250/16550 driver, 4
ports, IRQ sharing enabled
Apr 15 09:17:26 emperor kernel: [ 0.445818] Linux agpgart interface v0.103
Apr 15 09:17:26 emperor kernel: [ 0.445927] i8042: PNP: PS/2 Controller
[PNP0303:PS2K] at 0x60,0x64 irq 1
Apr 15 09:17:26 emperor kernel: [ 0.445928] i8042: PNP: PS/2 appears to have
AUX port disabled, if this is incorrect please boot with i8042.nopnp
Apr 15 09:17:26 emperor kernel: [ 0.446406] serio: i8042 KBD port at
0x60,0x64 irq 1
Apr 15 09:17:26 emperor kernel: [ 0.446498] mousedev: PS/2 mouse device
common for all mice
Apr 15 09:17:26 emperor kernel: [ 0.446539] rtc_cmos 00:01: RTC can wake
from S4
Apr 15 09:17:26 emperor kernel: [ 0.446642] rtc_cmos 00:01: rtc core:
registered rtc_cmos as rtc0
Apr 15 09:17:26 emperor kernel: [ 0.446663] rtc_cmos 00:01: alarms up to one
month, y3k, 114 bytes nvram, hpet irqs
Apr 15 09:17:26 emperor kernel: [ 0.446674] ledtrig-cpu: registered to
indicate activity on CPUs
Apr 15 09:17:26 emperor kernel: [ 0.447027] AMD IOMMUv2 driver by Joerg
Roedel <joerg.roedel at amd.com>
Apr 15 09:17:26 emperor kernel: [ 0.447028] AMD IOMMUv2 functionality not
available on this system
Apr 15 09:17:26 emperor kernel: [ 0.447099] TCP: cubic registered
Apr 15 09:17:26 emperor kernel: [ 0.447180] NET: Registered protocol family
10
Apr 15 09:17:26 emperor kernel: [ 0.447430] mip6: Mobile IPv6
Apr 15 09:17:26 emperor kernel: [ 0.447433] NET: Registered protocol family
17
Apr 15 09:17:26 emperor kernel: [ 0.447438] mpls_gso: MPLS GSO support
Apr 15 09:17:26 emperor kernel: [ 0.447690] registered taskstats version 1
Apr 15 09:17:26 emperor kernel: [ 0.448101] rtc_cmos 00:01: setting system
clock to 2016-04-15 07:17:11 UTC (1460704631)
Apr 15 09:17:26 emperor kernel: [ 0.448166] PM: Hibernation image not
present or could not be loaded.
Apr 15 09:17:26 emperor kernel: [ 0.449339] Freeing unused kernel memory:
1204K (ffffffff818ee000 - ffffffff81a1b000)
Apr 15 09:17:26 emperor kernel: [ 0.449340] Write protecting the kernel
read-only data: 8192k
Apr 15 09:17:26 emperor kernel: [ 0.449937] Freeing unused kernel memory:
912K (ffff88000151c000 - ffff880001600000)
Apr 15 09:17:26 emperor kernel: [ 0.450419] Freeing unused kernel memory:
212K (ffff8800017cb000 - ffff880001800000)
Apr 15 09:17:26 emperor kernel: [ 0.459874] random: systemd-udevd urandom
read with 2 bits of entropy available
Apr 15 09:17:26 emperor kernel: [ 0.470176] ACPI: bus type USB registered
Apr 15 09:17:26 emperor kernel: [ 0.470202] usbcore: registered new
interface driver usbfs
Apr 15 09:17:26 emperor kernel: [ 0.470213] usbcore: registered new
interface driver hub
Apr 15 09:17:26 emperor kernel: [ 0.470926] usbcore: registered new device
driver usb
Apr 15 09:17:26 emperor kernel: [ 0.471364] ehci_hcd: USB 2.0 'Enhanced'
Host Controller (EHCI) Driver
Apr 15 09:17:26 emperor kernel: [ 0.471569] ehci-pci: EHCI PCI platform
driver
Apr 15 09:17:26 emperor kernel: [ 0.471681] uhci_hcd: USB Universal Host
Controller Interface driver
Apr 15 09:17:26 emperor kernel: [ 0.471729] ehci-pci 0000:00:1a.7: EHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.471736] ehci-pci 0000:00:1a.7: new USB
bus registered, assigned bus number 1
Apr 15 09:17:26 emperor kernel: [ 0.471749] ehci-pci 0000:00:1a.7: debug
port 1
Apr 15 09:17:26 emperor kernel: [ 0.472866] sky2: driver version 1.30
Apr 15 09:17:26 emperor kernel: [ 0.472972] sky2 0000:02:00.0: Yukon-2 EC
Ultra chip revision 3
Apr 15 09:17:26 emperor kernel: [ 0.473030] sky2 0000:02:00.0: irq 44 for
MSI/MSI-X
Apr 15 09:17:26 emperor kernel: [ 0.473264] SCSI subsystem initialized
Apr 15 09:17:26 emperor kernel: [ 0.473485] sky2 0000:02:00.0 eth0: addr
00:1d:60:bc:f6:92
Apr 15 09:17:26 emperor kernel: [ 0.474875] libata version 3.00 loaded.
Apr 15 09:17:26 emperor kernel: [ 0.475637] ehci-pci 0000:00:1a.7: cache
line size of 32 is not supported
Apr 15 09:17:26 emperor kernel: [ 0.475670] ehci-pci 0000:00:1a.7: irq 18,
io mem 0xfe8ffc00
Apr 15 09:17:26 emperor kernel: [ 0.484041] ehci-pci 0000:00:1a.7: USB 2.0
started, EHCI 1.00
Apr 15 09:17:26 emperor kernel: [ 0.484104] usb usb1: New USB device found,
idVendor=1d6b, idProduct=0002
Apr 15 09:17:26 emperor kernel: [ 0.484106] usb usb1: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Apr 15 09:17:26 emperor kernel: [ 0.484107] usb usb1: Product: EHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.484109] usb usb1: Manufacturer: Linux
3.16.0-4-amd64 ehci_hcd
Apr 15 09:17:26 emperor kernel: [ 0.484111] usb usb1: SerialNumber:
0000:00:1a.7
Apr 15 09:17:26 emperor kernel: [ 0.484242] hub 1-0:1.0: USB hub found
Apr 15 09:17:26 emperor kernel: [ 0.484248] hub 1-0:1.0: 6 ports detected
Apr 15 09:17:26 emperor kernel: [ 0.484479] ehci-pci 0000:00:1d.7: EHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.484484] ehci-pci 0000:00:1d.7: new USB
bus registered, assigned bus number 2
Apr 15 09:17:26 emperor kernel: [ 0.484495] ehci-pci 0000:00:1d.7: debug
port 1
Apr 15 09:17:26 emperor kernel: [ 0.488395] ehci-pci 0000:00:1d.7: cache
line size of 32 is not supported
Apr 15 09:17:26 emperor kernel: [ 0.488406] ehci-pci 0000:00:1d.7: irq 23,
io mem 0xfe8ff800
Apr 15 09:17:26 emperor kernel: [ 0.500015] ehci-pci 0000:00:1d.7: USB 2.0
started, EHCI 1.00
Apr 15 09:17:26 emperor kernel: [ 0.500052] usb usb2: New USB device found,
idVendor=1d6b, idProduct=0002
Apr 15 09:17:26 emperor kernel: [ 0.500055] usb usb2: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Apr 15 09:17:26 emperor kernel: [ 0.500058] usb usb2: Product: EHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.500060] usb usb2: Manufacturer: Linux
3.16.0-4-amd64 ehci_hcd
Apr 15 09:17:26 emperor kernel: [ 0.500062] usb usb2: SerialNumber:
0000:00:1d.7
Apr 15 09:17:26 emperor kernel: [ 0.500216] hub 2-0:1.0: USB hub found
Apr 15 09:17:26 emperor kernel: [ 0.500222] hub 2-0:1.0: 6 ports detected
Apr 15 09:17:26 emperor kernel: [ 0.500461] uhci_hcd 0000:00:1a.0: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.500469] uhci_hcd 0000:00:1a.0: new USB
bus registered, assigned bus number 3
Apr 15 09:17:26 emperor kernel: [ 0.500478] uhci_hcd 0000:00:1a.0: detected
2 ports
Apr 15 09:17:26 emperor kernel: [ 0.500510] uhci_hcd 0000:00:1a.0: irq 16,
io base 0x0000b800
Apr 15 09:17:26 emperor kernel: [ 0.500585] usb usb3: New USB device found,
idVendor=1d6b, idProduct=0001
Apr 15 09:17:26 emperor kernel: [ 0.500587] usb usb3: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Apr 15 09:17:26 emperor kernel: [ 0.500589] usb usb3: Product: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.500591] usb usb3: Manufacturer: Linux
3.16.0-4-amd64 uhci_hcd
Apr 15 09:17:26 emperor kernel: [ 0.500592] usb usb3: SerialNumber:
0000:00:1a.0
Apr 15 09:17:26 emperor kernel: [ 0.500769] hub 3-0:1.0: USB hub found
Apr 15 09:17:26 emperor kernel: [ 0.500776] hub 3-0:1.0: 2 ports detected
Apr 15 09:17:26 emperor kernel: [ 0.500953] uhci_hcd 0000:00:1a.1: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.500959] uhci_hcd 0000:00:1a.1: new USB
bus registered, assigned bus number 4
Apr 15 09:17:26 emperor kernel: [ 0.500965] uhci_hcd 0000:00:1a.1: detected
2 ports
Apr 15 09:17:26 emperor kernel: [ 0.500988] uhci_hcd 0000:00:1a.1: irq 21,
io base 0x0000b880
Apr 15 09:17:26 emperor kernel: [ 0.501051] usb usb4: New USB device found,
idVendor=1d6b, idProduct=0001
Apr 15 09:17:26 emperor kernel: [ 0.501053] usb usb4: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Apr 15 09:17:26 emperor kernel: [ 0.501055] usb usb4: Product: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.501056] usb usb4: Manufacturer: Linux
3.16.0-4-amd64 uhci_hcd
Apr 15 09:17:26 emperor kernel: [ 0.501058] usb usb4: SerialNumber:
0000:00:1a.1
Apr 15 09:17:26 emperor kernel: [ 0.501152] hub 4-0:1.0: USB hub found
Apr 15 09:17:26 emperor kernel: [ 0.501158] hub 4-0:1.0: 2 ports detected
Apr 15 09:17:26 emperor kernel: [ 0.501314] uhci_hcd 0000:00:1a.2: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.501319] uhci_hcd 0000:00:1a.2: new USB
bus registered, assigned bus number 5
Apr 15 09:17:26 emperor kernel: [ 0.501325] uhci_hcd 0000:00:1a.2: detected
2 ports
Apr 15 09:17:26 emperor kernel: [ 0.501341] uhci_hcd 0000:00:1a.2: irq 18,
io base 0x0000bc00
Apr 15 09:17:26 emperor kernel: [ 0.501400] usb usb5: New USB device found,
idVendor=1d6b, idProduct=0001
Apr 15 09:17:26 emperor kernel: [ 0.501402] usb usb5: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Apr 15 09:17:26 emperor kernel: [ 0.501404] usb usb5: Product: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.501405] usb usb5: Manufacturer: Linux
3.16.0-4-amd64 uhci_hcd
Apr 15 09:17:26 emperor kernel: [ 0.501407] usb usb5: SerialNumber:
0000:00:1a.2
Apr 15 09:17:26 emperor kernel: [ 0.501496] hub 5-0:1.0: USB hub found
Apr 15 09:17:26 emperor kernel: [ 0.501501] hub 5-0:1.0: 2 ports detected
Apr 15 09:17:26 emperor kernel: [ 0.501661] uhci_hcd 0000:00:1d.0: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.501665] uhci_hcd 0000:00:1d.0: new USB
bus registered, assigned bus number 6
Apr 15 09:17:26 emperor kernel: [ 0.501671] uhci_hcd 0000:00:1d.0: detected
2 ports
Apr 15 09:17:26 emperor kernel: [ 0.501687] uhci_hcd 0000:00:1d.0: irq 23,
io base 0x0000b080
Apr 15 09:17:26 emperor kernel: [ 0.501746] usb usb6: New USB device found,
idVendor=1d6b, idProduct=0001
Apr 15 09:17:26 emperor kernel: [ 0.501749] usb usb6: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Apr 15 09:17:26 emperor kernel: [ 0.501750] usb usb6: Product: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.501752] usb usb6: Manufacturer: Linux
3.16.0-4-amd64 uhci_hcd
Apr 15 09:17:26 emperor kernel: [ 0.501753] usb usb6: SerialNumber:
0000:00:1d.0
Apr 15 09:17:26 emperor kernel: [ 0.501845] hub 6-0:1.0: USB hub found
Apr 15 09:17:26 emperor kernel: [ 0.501851] hub 6-0:1.0: 2 ports detected
Apr 15 09:17:26 emperor kernel: [ 0.502021] uhci_hcd 0000:00:1d.1: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.502025] uhci_hcd 0000:00:1d.1: new USB
bus registered, assigned bus number 7
Apr 15 09:17:26 emperor kernel: [ 0.502031] uhci_hcd 0000:00:1d.1: detected
2 ports
Apr 15 09:17:26 emperor kernel: [ 0.502054] uhci_hcd 0000:00:1d.1: irq 19,
io base 0x0000b400
Apr 15 09:17:26 emperor kernel: [ 0.502113] usb usb7: New USB device found,
idVendor=1d6b, idProduct=0001
Apr 15 09:17:26 emperor kernel: [ 0.502115] usb usb7: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Apr 15 09:17:26 emperor kernel: [ 0.502116] usb usb7: Product: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.502118] usb usb7: Manufacturer: Linux
3.16.0-4-amd64 uhci_hcd
Apr 15 09:17:26 emperor kernel: [ 0.502119] usb usb7: SerialNumber:
0000:00:1d.1
Apr 15 09:17:26 emperor kernel: [ 0.502209] hub 7-0:1.0: USB hub found
Apr 15 09:17:26 emperor kernel: [ 0.502215] hub 7-0:1.0: 2 ports detected
Apr 15 09:17:26 emperor kernel: [ 0.502375] uhci_hcd 0000:00:1d.2: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.502380] uhci_hcd 0000:00:1d.2: new USB
bus registered, assigned bus number 8
Apr 15 09:17:26 emperor kernel: [ 0.502386] uhci_hcd 0000:00:1d.2: detected
2 ports
Apr 15 09:17:26 emperor kernel: [ 0.502401] uhci_hcd 0000:00:1d.2: irq 18,
io base 0x0000b480
Apr 15 09:17:26 emperor kernel: [ 0.502461] usb usb8: New USB device found,
idVendor=1d6b, idProduct=0001
Apr 15 09:17:26 emperor kernel: [ 0.502463] usb usb8: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Apr 15 09:17:26 emperor kernel: [ 0.502465] usb usb8: Product: UHCI Host
Controller
Apr 15 09:17:26 emperor kernel: [ 0.502466] usb usb8: Manufacturer: Linux
3.16.0-4-amd64 uhci_hcd
Apr 15 09:17:26 emperor kernel: [ 0.502468] usb usb8: SerialNumber:
0000:00:1d.2
Apr 15 09:17:26 emperor kernel: [ 0.502558] hub 8-0:1.0: USB hub found
Apr 15 09:17:26 emperor kernel: [ 0.502564] hub 8-0:1.0: 2 ports detected
Apr 15 09:17:26 emperor kernel: [ 0.502690] ahci 0000:00:1f.2: version 3.0
Apr 15 09:17:26 emperor kernel: [ 0.502793] ahci 0000:00:1f.2: irq 45 for
MSI/MSI-X
Apr 15 09:17:26 emperor kernel: [ 0.502832] ahci 0000:00:1f.2: SSS flag set,
parallel bus scan disabled
Apr 15 09:17:26 emperor kernel: [ 0.502862] ahci 0000:00:1f.2: AHCI
0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
Apr 15 09:17:26 emperor kernel: [ 0.502864] ahci 0000:00:1f.2: flags: 64bit
ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
Apr 15 09:17:26 emperor kernel: [ 0.540819] scsi0 : ahci
Apr 15 09:17:26 emperor kernel: [ 0.540987] scsi1 : ahci
Apr 15 09:17:26 emperor kernel: [ 0.541140] scsi2 : ahci
Apr 15 09:17:26 emperor kernel: [ 0.541274] scsi3 : ahci
Apr 15 09:17:26 emperor kernel: [ 0.541439] scsi4 : ahci
Apr 15 09:17:26 emperor kernel: [ 0.541570] scsi5 : ahci
Apr 15 09:17:26 emperor kernel: [ 0.541636] ata1: SATA max UDMA/133 abar
m2048 at 0xfe8fe800 port 0xfe8fe900 irq 45
Apr 15 09:17:26 emperor kernel: [ 0.541638] ata2: SATA max UDMA/133 abar
m2048 at 0xfe8fe800 port 0xfe8fe980 irq 45
Apr 15 09:17:26 emperor kernel: [ 0.541640] ata3: SATA max UDMA/133 abar
m2048 at 0xfe8fe800 port 0xfe8fea00 irq 45
Apr 15 09:17:26 emperor kernel: [ 0.541642] ata4: SATA max UDMA/133 abar
m2048 at 0xfe8fe800 port 0xfe8fea80 irq 45
Apr 15 09:17:26 emperor kernel: [ 0.541644] ata5: SATA max UDMA/133 abar
m2048 at 0xfe8fe800 port 0xfe8feb00 irq 45
Apr 15 09:17:26 emperor kernel: [ 0.541645] ata6: SATA max UDMA/133 abar
m2048 at 0xfe8fe800 port 0xfe8feb80 irq 45
Apr 15 09:17:26 emperor kernel: [ 0.852013] usb 1-4: new high-speed USB
device number 3 using ehci-pci
Apr 15 09:17:26 emperor kernel: [ 1.032017] ata1: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
Apr 15 09:17:26 emperor kernel: [ 1.033118] ata1.00: ATAPI: Optiarc DVD RW
AD-7200S, 1.83, max UDMA/100
Apr 15 09:17:26 emperor kernel: [ 1.034508] ata1.00: configured for UDMA/100
Apr 15 09:17:26 emperor kernel: [ 1.037824] scsi 0:0:0:0: CD-ROM
Optiarc DVD RW AD-7200S 1.83 PQ: 0 ANSI: 5
Apr 15 09:17:26 emperor kernel: [ 1.112720] usb 1-4: New USB device found,
idVendor=046d, idProduct=0990
Apr 15 09:17:26 emperor kernel: [ 1.112723] usb 1-4: New USB device strings:
Mfr=0, Product=0, SerialNumber=2
Apr 15 09:17:26 emperor kernel: [ 1.112726] usb 1-4: SerialNumber: 5997F515
Apr 15 09:17:26 emperor kernel: [ 1.436016] tsc: Refined TSC clocksource
calibration: 2999.658 MHz
Apr 15 09:17:26 emperor kernel: [ 1.528016] ata2: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Apr 15 09:17:26 emperor kernel: [ 1.541323] ata2.00: ATA-8: WDC WD5000AAKS-
07YGA0, 12.01C02, max UDMA/133
Apr 15 09:17:26 emperor kernel: [ 1.541326] ata2.00: 976773168 sectors,
multi 0: LBA48 NCQ (depth 31/32), AA
Apr 15 09:17:26 emperor kernel: [ 1.542204] ata2.00: configured for UDMA/133
Apr 15 09:17:26 emperor kernel: [ 1.542254] scsi 1:0:0:0: Direct-Access
ATA WDC WD5000AAKS-0 1C02 PQ: 0 ANSI: 5
Apr 15 09:17:26 emperor kernel: [ 1.664012] usb 5-2: new low-speed USB
device number 2 using uhci_hcd
Apr 15 09:17:26 emperor kernel: [ 1.843375] usb 5-2: New USB device found,
idVendor=046d, idProduct=c312
Apr 15 09:17:26 emperor kernel: [ 1.843379] usb 5-2: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Apr 15 09:17:26 emperor kernel: [ 1.843381] usb 5-2: Product: USB Multimedia
Keyboard
Apr 15 09:17:26 emperor kernel: [ 1.843384] usb 5-2: Manufacturer: LITEON
Technology
Apr 15 09:17:26 emperor kernel: [ 1.847239] hidraw: raw HID events driver
(C) Jiri Kosina
Apr 15 09:17:26 emperor kernel: [ 1.847986] scsi6 : pata_marvell
Apr 15 09:17:26 emperor kernel: [ 1.848142] scsi7 : pata_marvell
Apr 15 09:17:26 emperor kernel: [ 1.848191] ata7: PATA max UDMA/100 cmd
0xec00 ctl 0xe880 bmdma 0xe400 irq 16
Apr 15 09:17:26 emperor kernel: [ 1.848193] ata8: PATA max UDMA/133 cmd
0xe800 ctl 0xe480 bmdma 0xe408 irq 16
Apr 15 09:17:26 emperor kernel: [ 1.860019] ata3: SATA link down (SStatus 0
SControl 300)
Apr 15 09:17:26 emperor kernel: [ 1.862628] usbcore: registered new
interface driver usbhid
Apr 15 09:17:26 emperor kernel: [ 1.862629] usbhid: USB HID core driver
Apr 15 09:17:26 emperor kernel: [ 1.863199] input: LITEON Technology USB
Multimedia Keyboard as
/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:046D:C312.0001/input/input1
Apr 15 09:17:26 emperor kernel: [ 1.863265] hid-generic 0003:046D:C312.0001:
input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia
Keyboard] on usb-0000:00:1a.2-2/input0
Apr 15 09:17:26 emperor kernel: [ 2.084014] usb 4-1: new low-speed USB
device number 2 using uhci_hcd
Apr 15 09:17:26 emperor kernel: [ 2.180016] ata4: SATA link down (SStatus 0
SControl 300)
Apr 15 09:17:26 emperor kernel: [ 2.260021] usb 4-1: New USB device found,
idVendor=046d, idProduct=c018
Apr 15 09:17:26 emperor kernel: [ 2.260025] usb 4-1: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Apr 15 09:17:26 emperor kernel: [ 2.260027] usb 4-1: Product: USB Optical
Mouse
Apr 15 09:17:26 emperor kernel: [ 2.260030] usb 4-1: Manufacturer: Logitech
Apr 15 09:17:26 emperor kernel: [ 2.276391] input: Logitech USB Optical
Mouse as
/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046D:C018.0002/input/input2
Apr 15 09:17:26 emperor kernel: [ 2.276501] hid-generic 0003:046D:C018.0002:
input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on
usb-0000:00:1a.1-1/input0
Apr 15 09:17:26 emperor kernel: [ 2.436071] Switched to clocksource tsc
Apr 15 09:17:26 emperor kernel: [ 2.500014] ata5: SATA link down (SStatus 0
SControl 300)
Apr 15 09:17:26 emperor kernel: [ 2.820012] ata6: SATA link down (SStatus 0
SControl 300)
Apr 15 09:17:26 emperor kernel: [ 2.997642] sr0: scsi3-mmc drive: 32x/32x
writer dvd-ram cd/rw xa/form2 cdda tray
Apr 15 09:17:26 emperor kernel: [ 2.997645] cdrom: Uniform CD-ROM driver
Revision: 3.20
Apr 15 09:17:26 emperor kernel: [ 2.997804] sr 0:0:0:0: Attached scsi CD-ROM
sr0
Apr 15 09:17:26 emperor kernel: [ 2.998195] sr 0:0:0:0: Attached scsi
generic sg0 type 5
Apr 15 09:17:26 emperor kernel: [ 2.998227] scsi 1:0:0:0: Attached scsi
generic sg1 type 0
Apr 15 09:17:26 emperor kernel: [ 3.024977] sd 1:0:0:0: [sda] 976773168
512-byte logical blocks: (500 GB/465 GiB)
Apr 15 09:17:26 emperor kernel: [ 3.025028] sd 1:0:0:0: [sda] Write Protect
is off
Apr 15 09:17:26 emperor kernel: [ 3.025031] sd 1:0:0:0: [sda] Mode Sense: 00
3a 00 00
Apr 15 09:17:26 emperor kernel: [ 3.025049] sd 1:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Apr 15 09:17:26 emperor kernel: [ 3.042837] sda: sda1 sda2 sda3
Apr 15 09:17:26 emperor kernel: [ 3.043141] sd 1:0:0:0: [sda] Attached SCSI
disk
Apr 15 09:17:26 emperor kernel: [ 3.492023] floppy0: no floppy controllers
found
Apr 15 09:17:26 emperor kernel: [ 3.650241] PM: Starting manual resume from
disk
Apr 15 09:17:26 emperor kernel: [ 3.650244] PM: Hibernation image partition
8:1 present
Apr 15 09:17:26 emperor kernel: [ 3.650245] PM: Looking for hibernation
image.
Apr 15 09:17:26 emperor kernel: [ 3.650418] PM: Image not found (code -22)
Apr 15 09:17:26 emperor kernel: [ 3.650421] PM: Hibernation image not
present or could not be loaded.
Apr 15 09:17:26 emperor kernel: [ 3.758052] EXT4-fs (sda2): mounted
filesystem with ordered data mode. Opts: (null)
Apr 15 09:17:26 emperor kernel: [ 4.555258] random: nonblocking pool is
initialized
Apr 15 09:17:26 emperor kernel: [ 6.273567] lp: driver loaded but no devices
found
Apr 15 09:17:26 emperor kernel: [ 6.274733] ppdev: user-space parallel port
driver
Apr 15 09:17:26 emperor kernel: [ 6.485905] fuse init (API version 7.23)
Apr 15 09:17:26 emperor kernel: [ 7.734893] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
Apr 15 09:17:26 emperor kernel: [ 7.734898] ACPI: Power Button [PWRB]
Apr 15 09:17:26 emperor kernel: [ 7.734953] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Apr 15 09:17:26 emperor kernel: [ 7.734955] ACPI: Power Button [PWRF]
Apr 15 09:17:26 emperor kernel: [ 7.741220] EXT4-fs (sda2): re-mounted.
Opts: errors=remount-ro
Apr 15 09:17:26 emperor kernel: [ 7.831323] EDAC MC: Ver: 3.0.0
Apr 15 09:17:26 emperor kernel: [ 7.836349] EDAC MC0: Giving out device to
module x38_edac controller x38: DEV 0000:00:00.0 (POLLED)
Apr 15 09:17:26 emperor kernel: [ 7.935377] shpchp: Standard Hot Plug PCI
Controller Driver version: 0.4
Apr 15 09:17:26 emperor kernel: [ 8.028071] ACPI Warning: SystemIO range
0x0000000000000480-0x00000000000004AF conflicts with OpRegion
0x0000000000000480-0x000000000000048F (\GPS0) (20140424/utaddress-254)
Apr 15 09:17:26 emperor kernel: [ 8.028077] ACPI: If an ACPI driver is
available for this device, you should use it instead of the native driver
Apr 15 09:17:26 emperor kernel: [ 8.311234] ACPI Warning: SystemIO range
0x0000000000000400-0x000000000000041F conflicts with OpRegion
0x0000000000000400-0x000000000000040F (\SMRG) (20140424/utaddress-254)
Apr 15 09:17:26 emperor kernel: [ 8.311240] ACPI: If an ACPI driver is
available for this device, you should use it instead of the native driver
Apr 15 09:17:26 emperor kernel: [ 8.328131] [drm] Initialized drm 1.1.0
20060810
Apr 15 09:17:26 emperor kernel: [ 8.362499] input: PC Speaker as
/devices/platform/pcspkr/input/input5
Apr 15 09:17:26 emperor kernel: [ 8.409518] [drm] radeon kernel modesetting
enabled.
Apr 15 09:17:26 emperor kernel: [ 8.422759] snd_hda_intel 0000:00:1b.0: irq
46 for MSI/MSI-X
Apr 15 09:17:26 emperor kernel: [ 8.479369] checking generic (d0000000
80000) vs hw (d0000000 10000000)
Apr 15 09:17:26 emperor kernel: [ 8.479372] fb: switching to radeondrmfb
from VESA VGA
Apr 15 09:17:26 emperor kernel: [ 8.479405] Console: switching to colour
dummy device 80x25
Apr 15 09:17:26 emperor kernel: [ 8.479674] [drm] initializing kernel
modesetting (REDWOOD 0x1002:0x68D8 0x1787:0x2294).
Apr 15 09:17:26 emperor kernel: [ 8.479689] [drm] register mmio base:
0xFE9C0000
Apr 15 09:17:26 emperor kernel: [ 8.479690] [drm] register mmio size: 131072
Apr 15 09:17:26 emperor kernel: [ 8.479742] ATOM BIOS:
Apr 15 09:17:26 emperor kernel: [ 8.479792] radeon 0000:01:00.0: VRAM: 1024M
0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
Apr 15 09:17:26 emperor kernel: [ 8.479794] radeon 0000:01:00.0: GTT: 1024M
0x0000000040000000 - 0x000000007FFFFFFF
Apr 15 09:17:26 emperor kernel: [ 8.479795] [drm] Detected VRAM RAM=1024M,
BAR=256M
Apr 15 09:17:26 emperor kernel: [ 8.479797] [drm] RAM width 128bits DDR
Apr 15 09:17:26 emperor kernel: [ 8.479861] [TTM] Zone kernel: Available
graphics memory: 4097606 kiB
Apr 15 09:17:26 emperor kernel: [ 8.479862] [TTM] Zone dma32: Available
graphics memory: 2097152 kiB
Apr 15 09:17:26 emperor kernel: [ 8.479863] [TTM] Initializing pool
allocator
Apr 15 09:17:26 emperor kernel: [ 8.479867] [TTM] Initializing DMA pool
allocator
Apr 15 09:17:26 emperor kernel: [ 8.479882] [drm] radeon: 1024M of VRAM
memory ready
Apr 15 09:17:26 emperor kernel: [ 8.479884] [drm] radeon: 1024M of GTT
memory ready.
Apr 15 09:17:26 emperor kernel: [ 8.479895] [drm] Loading REDWOOD Microcode
Apr 15 09:17:26 emperor kernel: [ 8.513083] iTCO_vendor_support: vendor-
support=0
Apr 15 09:17:26 emperor kernel: [ 8.513628] iTCO_wdt: Intel TCO WatchDog
Timer Driver v1.11
Apr 15 09:17:26 emperor kernel: [ 8.513661] iTCO_wdt: Found a ICH9R TCO
device (Version=2, TCOBASE=0x0860)
Apr 15 09:17:26 emperor kernel: [ 8.513787] iTCO_wdt: initialized.
heartbeat=30 sec (nowayout=0)
Apr 15 09:17:26 emperor kernel: [ 8.539849] radeon 0000:01:00.0: firmware:
direct-loading firmware radeon/REDWOOD_pfp.bin
Apr 15 09:17:26 emperor kernel: [ 8.543742] radeon 0000:01:00.0: firmware:
direct-loading firmware radeon/REDWOOD_me.bin
Apr 15 09:17:26 emperor kernel: [ 8.578859] radeon 0000:01:00.0: firmware:
direct-loading firmware radeon/REDWOOD_rlc.bin
Apr 15 09:17:26 emperor kernel: [ 8.579206] radeon 0000:01:00.0: firmware:
direct-loading firmware radeon/REDWOOD_smc.bin
Apr 15 09:17:26 emperor kernel: [ 8.579211] [drm] Internal thermal
controller with fan control
Apr 15 09:17:26 emperor kernel: [ 8.588714] sound hdaudioC0D0: autoconfig:
line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
Apr 15 09:17:26 emperor kernel: [ 8.588717] sound hdaudioC0D0:
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Apr 15 09:17:26 emperor kernel: [ 8.588719] sound hdaudioC0D0: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
Apr 15 09:17:26 emperor kernel: [ 8.588721] sound hdaudioC0D0: mono:
mono_out=0x0
Apr 15 09:17:26 emperor kernel: [ 8.588722] sound hdaudioC0D0: dig-
out=0x1e/0x0
Apr 15 09:17:26 emperor kernel: [ 8.588723] sound hdaudioC0D0: inputs:
Apr 15 09:17:26 emperor kernel: [ 8.588726] sound hdaudioC0D0: Front
Mic=0x19
Apr 15 09:17:26 emperor kernel: [ 8.588727] sound hdaudioC0D0: Rear
Mic=0x18
Apr 15 09:17:26 emperor kernel: [ 8.588729] sound hdaudioC0D0:
Line=0x1a
Apr 15 09:17:26 emperor kernel: [ 8.600497] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input6
Apr 15 09:17:26 emperor kernel: [ 8.600801] input: HDA Intel Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
Apr 15 09:17:26 emperor kernel: [ 8.600889] input: HDA Intel Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
Apr 15 09:17:26 emperor kernel: [ 8.600975] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Apr 15 09:17:26 emperor kernel: [ 8.601062] input: HDA Intel Line Out Front
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Apr 15 09:17:26 emperor kernel: [ 8.601146] input: HDA Intel Line Out
Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Apr 15 09:17:26 emperor kernel: [ 8.601231] input: HDA Intel Line Out CLFE
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Apr 15 09:17:26 emperor kernel: [ 8.601314] input: HDA Intel Line Out Side
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
Apr 15 09:17:26 emperor kernel: [ 8.601400] input: HDA Intel Front Headphone
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
Apr 15 09:17:26 emperor kernel: [ 8.604553] [drm] radeon: dpm initialized
Apr 15 09:17:26 emperor kernel: [ 8.857879] radeon 0000:01:00.0: firmware:
direct-loading firmware radeon/CYPRESS_uvd.bin
Apr 15 09:17:26 emperor kernel: [ 8.857912] [drm] GART: num cpu pages
262144, num gpu pages 262144
Apr 15 09:17:26 emperor kernel: [ 8.859081] [drm] enabling PCIE gen 2 link
speeds, disable with radeon.pcie_gen2=0
Apr 15 09:17:26 emperor kernel: [ 8.870962] [drm] PCIE GART of 1024M enabled
(table at 0x000000000025D000).
Apr 15 09:17:26 emperor kernel: [ 8.871055] radeon 0000:01:00.0: WB enabled
Apr 15 09:17:26 emperor kernel: [ 8.871059] radeon 0000:01:00.0: fence
driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr
0xffff88022615fc00
Apr 15 09:17:26 emperor kernel: [ 8.871062] radeon 0000:01:00.0: fence
driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr
0xffff88022615fc0c
Apr 15 09:17:26 emperor kernel: [ 8.871900] radeon 0000:01:00.0: fence
driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr
0xffffc90010f9c418
Apr 15 09:17:26 emperor kernel: [ 8.871904] [drm] Supports vblank timestamp
caching Rev 2 (21.10.2013).
Apr 15 09:17:26 emperor kernel: [ 8.871906] [drm] Driver supports precise
vblank timestamp query.
Apr 15 09:17:26 emperor kernel: [ 8.871908] radeon 0000:01:00.0: radeon: MSI
limited to 32-bit
Apr 15 09:17:26 emperor kernel: [ 8.871928] radeon 0000:01:00.0: irq 47 for
MSI/MSI-X
Apr 15 09:17:26 emperor kernel: [ 8.871941] radeon 0000:01:00.0: radeon:
using MSI.
Apr 15 09:17:26 emperor kernel: [ 8.871967] [drm] radeon: irq initialized.
Apr 15 09:17:26 emperor kernel: [ 8.888491] [drm] ring test on 0 succeeded
in 0 usecs
Apr 15 09:17:26 emperor kernel: [ 8.888497] [drm] ring test on 3 succeeded
in 2 usecs
Apr 15 09:17:26 emperor kernel: [ 9.093977] [drm] ring test on 5 succeeded
in 1 usecs
Apr 15 09:17:26 emperor kernel: [ 9.093982] [drm] UVD initialized
successfully.
Apr 15 09:17:26 emperor kernel: [ 9.094414] [drm] ib test on ring 0
succeeded in 0 usecs
Apr 15 09:17:26 emperor kernel: [ 9.094433] [drm] ib test on ring 3
succeeded in 0 usecs
Apr 15 09:17:26 emperor kernel: [ 9.128711] Adding 10239996k swap on
/dev/sda1. Priority:-1 extents:1 across:10239996k FS
Apr 15 09:17:26 emperor kernel: [ 9.264445] [drm] ib test on ring 5
succeeded
Apr 15 09:17:26 emperor kernel: [ 9.265069] [drm] Radeon Display Connectors
Apr 15 09:17:26 emperor kernel: [ 9.265071] [drm] Connector 0:
Apr 15 09:17:26 emperor kernel: [ 9.265072] [drm] DP-1
Apr 15 09:17:26 emperor kernel: [ 9.265073] [drm] HPD4
Apr 15 09:17:26 emperor kernel: [ 9.265074] [drm] DDC: 0x6440 0x6440
0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
Apr 15 09:17:26 emperor kernel: [ 9.265075] [drm] Encoders:
Apr 15 09:17:26 emperor kernel: [ 9.265076] [drm] DFP1: INTERNAL_UNIPHY2
Apr 15 09:17:26 emperor kernel: [ 9.265077] [drm] Connector 1:
Apr 15 09:17:26 emperor kernel: [ 9.265078] [drm] HDMI-A-1
Apr 15 09:17:26 emperor kernel: [ 9.265079] [drm] HPD5
Apr 15 09:17:26 emperor kernel: [ 9.265080] [drm] DDC: 0x6430 0x6430
0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
Apr 15 09:17:26 emperor kernel: [ 9.265081] [drm] Encoders:
Apr 15 09:17:26 emperor kernel: [ 9.265082] [drm] DFP2: INTERNAL_UNIPHY2
Apr 15 09:17:26 emperor kernel: [ 9.265083] [drm] Connector 2:
Apr 15 09:17:26 emperor kernel: [ 9.265083] [drm] DVI-I-1
Apr 15 09:17:26 emperor kernel: [ 9.265084] [drm] HPD1
Apr 15 09:17:26 emperor kernel: [ 9.265085] [drm] DDC: 0x6460 0x6460
0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
Apr 15 09:17:26 emperor kernel: [ 9.265086] [drm] Encoders:
Apr 15 09:17:26 emperor kernel: [ 9.265087] [drm] DFP3: INTERNAL_UNIPHY1
Apr 15 09:17:26 emperor kernel: [ 9.265088] [drm] CRT2:
INTERNAL_KLDSCP_DAC2
Apr 15 09:17:26 emperor kernel: [ 9.265089] [drm] Connector 3:
Apr 15 09:17:26 emperor kernel: [ 9.265090] [drm] DVI-I-2
Apr 15 09:17:26 emperor kernel: [ 9.265091] [drm] HPD6
Apr 15 09:17:26 emperor kernel: [ 9.265092] [drm] DDC: 0x6450 0x6450
0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
Apr 15 09:17:26 emperor kernel: [ 9.265093] [drm] Encoders:
Apr 15 09:17:26 emperor kernel: [ 9.265094] [drm] DFP4: INTERNAL_UNIPHY
Apr 15 09:17:26 emperor kernel: [ 9.265095] [drm] CRT1:
INTERNAL_KLDSCP_DAC1
Apr 15 09:17:26 emperor kernel: [ 9.326438] [drm] fb mappable at 0xD045E000
Apr 15 09:17:26 emperor kernel: [ 9.326440] [drm] vram apper at 0xD0000000
Apr 15 09:17:26 emperor kernel: [ 9.326441] [drm] size 5242880
Apr 15 09:17:26 emperor kernel: [ 9.326442] [drm] fb depth is 24
Apr 15 09:17:26 emperor kernel: [ 9.326443] [drm] pitch is 5120
Apr 15 09:17:26 emperor kernel: [ 9.326497] fbcon: radeondrmfb (fb0) is
primary device
Apr 15 09:17:26 emperor kernel: [ 9.335409] media: Linux media interface:
v0.10
Apr 15 09:17:26 emperor kernel: [ 9.346211] Linux video capture interface:
v2.00
Apr 15 09:17:26 emperor kernel: [ 9.357334] Console: switching to colour
frame buffer device 160x64
Apr 15 09:17:26 emperor kernel: [ 9.360014] radeon 0000:01:00.0: fb0:
radeondrmfb frame buffer device
Apr 15 09:17:26 emperor kernel: [ 9.360016] radeon 0000:01:00.0: registered
panic notifier
Apr 15 09:17:26 emperor kernel: [ 9.369930] [drm] Initialized radeon 2.39.0
20080528 for 0000:01:00.0 on minor 0
Apr 15 09:17:26 emperor kernel: [ 9.370056] snd_hda_intel 0000:01:00.1:
Handle VGA-switcheroo audio client
Apr 15 09:17:26 emperor kernel: [ 9.370197] snd_hda_intel 0000:01:00.1: irq
48 for MSI/MSI-X
Apr 15 09:17:26 emperor kernel: [ 9.396362] uvcvideo: Found UVC 1.00 device
<unnamed> (046d:0990)
Apr 15 09:17:26 emperor kernel: [ 9.412110] input: UVC Camera (046d:0990) as
/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input15
Apr 15 09:17:26 emperor kernel: [ 9.412192] usbcore: registered new
interface driver uvcvideo
Apr 15 09:17:26 emperor kernel: [ 9.412194] USB Video Class driver (1.1.1)
Apr 15 09:17:26 emperor kernel: [ 9.435848] input: HDA ATI HDMI
HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
Apr 15 09:17:26 emperor kernel: [ 9.765224] usb 1-4: Warning! Unlikely big
volume range (=3072), cval->res is probably wrong.
Apr 15 09:17:26 emperor kernel: [ 9.765228] usb 1-4: [5] FU [Mic Capture
Volume] ch = 1, val = 4608/7680/1
Apr 15 09:17:26 emperor kernel: [ 9.765390] usbcore: registered new
interface driver snd-usb-audio
Apr 15 09:17:26 emperor kernel: [ 10.370411] EXT4-fs (sda3): mounted
filesystem with ordered data mode. Opts: (null)
Apr 15 09:17:26 emperor kernel: [ 10.836032] floppy0: no floppy controllers
found
Apr 15 09:17:26 emperor kernel: [ 14.326737] cfg80211: Calling CRDA to update
world regulatory domain
Apr 15 09:17:26 emperor kernel: [ 14.419501] cfg80211: World regulatory
domain updated:
Apr 15 09:17:26 emperor kernel: [ 14.419504] cfg80211: DFS Master region:
unset
Apr 15 09:17:26 emperor kernel: [ 14.419505] cfg80211: (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Apr 15 09:17:26 emperor kernel: [ 14.419507] cfg80211: (2402000 KHz -
2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Apr 15 09:17:26 emperor kernel: [ 14.419508] cfg80211: (2457000 KHz -
2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Apr 15 09:17:26 emperor kernel: [ 14.419510] cfg80211: (2474000 KHz -
2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Apr 15 09:17:26 emperor kernel: [ 14.419512] cfg80211: (5170000 KHz -
5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
Apr 15 09:17:26 emperor kernel: [ 14.419514] cfg80211: (5250000 KHz -
5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Apr 15 09:17:26 emperor kernel: [ 14.419516] cfg80211: (5490000 KHz -
5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Apr 15 09:17:26 emperor kernel: [ 14.419517] cfg80211: (5735000 KHz -
5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Apr 15 09:17:26 emperor kernel: [ 14.419519] cfg80211: (57240000 KHz -
63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Apr 15 09:17:26 emperor acpid: 1 rule loaded
Apr 15 09:17:26 emperor acpid: waiting for events: event logging is off
Apr 15 09:17:26 emperor rsyslogd-2007: action 'action 18' suspended, next retry
is Fri Apr 15 09:17:56 2016 [try http://www.rsyslog.com/e/2007 ]
Apr 15 09:17:26 emperor polkitd[587]: started daemon version 0.105 using
authority implementation `local' version `0.105'
Apr 15 09:17:26 emperor dbus[537]: [system] Successfully activated service
'org.freedesktop.PolicyKit1'
Apr 15 09:17:26 emperor accounts-daemon[521]: started daemon version 0.6.37
Apr 15 09:17:26 emperor NetworkManager[529]: <info> init!
Apr 15 09:17:26 emperor NetworkManager[529]: <info> update_system_hostname
Apr 15 09:17:26 emperor NetworkManager[529]: <info> interface-parser:
parsing file /etc/network/interfaces
Apr 15 09:17:26 emperor NetworkManager[529]: <info> interface-parser:
source line includes interfaces file(s) /etc/network/interfaces.d/*
Apr 15 09:17:26 emperor NetworkManager[529]: <warn> interfaces file
/etc/network/interfaces.d/* doesn't exist
Apr 15 09:17:26 emperor NetworkManager[529]: <info> interface-parser:
finished parsing file /etc/network/interfaces
Apr 15 09:17:26 emperor NetworkManager[529]: <info> management mode: unmanaged
Apr 15 09:17:26 emperor NetworkManager[529]: <info> devices added (path:
/sys/devices/pci0000:00/0000:00:1c.5/0000:02:00.0/net/eth0, iface: eth0)
Apr 15 09:17:26 emperor NetworkManager[529]: <info> device added (path:
/sys/devices/pci0000:00/0000:00:1c.5/0000:02:00.0/net/eth0, iface: eth0): no
ifupdown configuration found.
Apr 15 09:17:26 emperor NetworkManager[529]: <info> devices added (path:
/sys/devices/virtual/net/lo, iface: lo)
Apr 15 09:17:26 emperor NetworkManager[529]: <info> device added (path:
/sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Apr 15 09:17:26 emperor NetworkManager[529]: <info> end _init.
Apr 15 09:17:26 emperor NetworkManager[529]: <info> Loaded plugin ifupdown: (C)
2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list.
Apr 15 09:17:26 emperor NetworkManager[529]: <info> Loaded plugin keyfile: (c)
2007 - 2013 Red Hat, Inc. To report bugs please use the NetworkManager mailing
list.
Apr 15 09:17:26 emperor NetworkManager[529]: <info> (32342656) ...
get_connections.
Apr 15 09:17:26 emperor NetworkManager[529]: <info> (32342656) ...
get_connections (managed=false): return empty list.
Apr 15 09:17:27 emperor NetworkManager[529]: <info> new connection
/etc/NetworkManager/system-connections/Wired connection 1
Apr 15 09:17:27 emperor NetworkManager[529]: <info> get unmanaged devices
count: 0
Apr 15 09:17:27 emperor NetworkManager[529]: <info> monitoring kernel firmware
directory '/lib/firmware'.
Apr 15 09:17:27 emperor NetworkManager[529]: <info> monitoring ifupdown state
file '/run/network/ifstate'.
Apr 15 09:17:27 emperor NetworkManager[529]: <info> WiFi hardware radio set
enabled
Apr 15 09:17:27 emperor NetworkManager[529]: <info> WWAN hardware radio set
enabled
Apr 15 09:17:27 emperor NetworkManager[529]: <info> Loaded device plugin:
/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-wifi.so
Apr 15 09:17:27 emperor NetworkManager[529]: <info> Loaded device plugin:
/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-wwan.so
Apr 15 09:17:27 emperor NetworkManager[529]: <info> Loaded device plugin:
/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-adsl.so
Apr 15 09:17:27 emperor NetworkManager[529]: <info> Loaded device plugin:
/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so
Apr 15 09:17:27 emperor NetworkManager[529]: <info> WiFi enabled by radio
killswitch; enabled by state file
Apr 15 09:17:27 emperor NetworkManager[529]: <info> WWAN enabled by radio
killswitch; enabled by state file
Apr 15 09:17:27 emperor NetworkManager[529]: <info> WiMAX enabled by radio
killswitch; enabled by state file
Apr 15 09:17:27 emperor NetworkManager[529]: <info> Networking is enabled by
state file
Apr 15 09:17:27 emperor NetworkManager[529]: <info> (lo): link connected
Apr 15 09:17:27 emperor NetworkManager[529]: <info> (lo): carrier is ON
Apr 15 09:17:27 emperor NetworkManager[529]: <info> (lo): new Generic device
(driver: 'unknown' ifindex: 1)
Apr 15 09:17:27 emperor NetworkManager[529]: <info> (lo): exported as
/org/freedesktop/NetworkManager/Devices/0
Apr 15 09:17:27 emperor NetworkManager[529]: <info> (eth0): carrier is OFF
Apr 15 09:17:27 emperor NetworkManager[529]: <info> (eth0): new Ethernet device
(driver: 'sky2' ifindex: 2)
Apr 15 09:17:27 emperor NetworkManager[529]: <info> (eth0): exported as
/org/freedesktop/NetworkManager/Devices/1
Apr 15 09:17:27 emperor NetworkManager[529]: <info> (eth0): device state
change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Apr 15 09:17:27 emperor NetworkManager[529]: <info> (eth0): preparing device
Apr 15 09:17:27 emperor kernel: [ 16.214192] sky2 0000:02:00.0 eth0: enabling
interface
Apr 15 09:17:27 emperor kernel: [ 16.214257] IPv6: ADDRCONF(NETDEV_UP): eth0:
link is not ready
Apr 15 09:17:27 emperor NetworkManager[529]: <info> ModemManager disappeared
from bus
Apr 15 09:17:27 emperor NetworkManager[529]: <info> ModemManager available in
the bus
Apr 15 09:17:27 emperor dbus[537]: [system] Activating via systemd: service
name='org.freedesktop.ColorManager' unit='colord.service'
Apr 15 09:17:28 emperor colord: Using mapping database file
/var/lib/colord/mapping.db
Apr 15 09:17:28 emperor colord: Using device database file
/var/lib/colord/storage.db
Apr 15 09:17:28 emperor colord: Using profile database file
/var/lib/colord/storage.db
Apr 15 09:17:28 emperor colord: loaded plugin libcd_plugin_sane.so
Apr 15 09:17:28 emperor colord: loaded plugin libcd_plugin_camera.so
Apr 15 09:17:28 emperor colord: loaded plugin libcd_plugin_scanner.so
Apr 15 09:17:28 emperor colord: Daemon ready for requests
Apr 15 09:17:28 emperor dbus[537]: [system] Successfully activated service
'org.freedesktop.ColorManager'
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: X.Org X Server 1.16.4
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Release Date: 2014-12-20
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: X Protocol Version 11, Revision 0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Build Operating System: Linux
3.16.0-4-amd64 x86_64 Debian
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Current Operating System: Linux
emperor 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) x86_64
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=c5884e51-d422-45d6-bf84-3c1d51b7d605 ro vga=771 quiet
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Build Date: 11 February 2015
12:32:02AM
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: xorg-server 2:1.16.4-1
(http://www.debian.org/support)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Current version of pixman: 0.32.6
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Before reporting problems, check
http://wiki.x.org
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: to make sure that you have the latest
version.
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Markers: (--) probed, (**) from
config file, (==) default setting,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (++) from command line, (!!) notice,
(II) informational,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (WW) warning, (EE) error, (NI) not
implemented, (??) unknown.
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) Log file: "/var/log/Xorg.0.log",
Time: Fri Apr 15 09:17:28 2016
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) Using system config directory
"/usr/share/X11/xorg.conf.d"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) No Layout section. Using the
first Screen section.
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) No screen section available.
Using defaults.
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (**) |-->Screen "Default Screen
Section" (0)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (**) | |-->Monitor "<default
monitor>"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) No monitor specified for screen
"Default Screen Section".
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Using a default monitor
configuration.
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) Automatically adding devices
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) Automatically enabling devices
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) Automatically adding GPU devices
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (WW) The directory
"/usr/share/fonts/X11/cyrillic" does not exist.
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Entry deleted from font path.
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) FontPath set to:
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: /usr/share/fonts/X11/misc,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]:
/usr/share/fonts/X11/100dpi/:unscaled,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: /usr/share/fonts/X11/75dpi/:unscaled,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: /usr/share/fonts/X11/Type1,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: /usr/share/fonts/X11/100dpi,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: /usr/share/fonts/X11/75dpi,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: built-ins
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) ModulePath set to
"/usr/lib/xorg/modules"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) The server relies on udev to
provide the list of input devices.
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: If no devices become available,
reconfigure udev or disable AutoAddDevices.
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loader magic: 0x7f298aa63d80
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Module ABI versions:
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: X.Org ANSI C Emulation: 0.4
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: X.Org Video Driver: 18.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: X.Org XInput driver : 21.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: X.Org Server Extension : 8.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) xfree86: Adding drm device
(/dev/dri/card0)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (--) PCI:*(0:1:0:0)
1002:68d8:1787:2294 rev 0, Mem @ 0xd0000000/268435456, 0xfe9c0000/131072, I/O @
0x0000c000/256, BIOS @ 0x????????/131072
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) LoadModule: "glx"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading
/usr/lib/xorg/modules/extensions/libglx.so
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Module glx: vendor="X.Org
Foundation"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: compiled for 1.16.4, module version =
1.0.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ABI class: X.Org Server Extension,
version 8.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) AIGLX enabled
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) Matched ati as autoconfigured
driver 0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) Matched ati as autoconfigured
driver 1
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) Matched modesetting as
autoconfigured driver 2
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) Matched fbdev as autoconfigured
driver 3
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) Matched vesa as autoconfigured
driver 4
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) Assigned the driver to the
xf86ConfigLayout
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) LoadModule: "ati"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading
/usr/lib/xorg/modules/drivers/ati_drv.so
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Module ati: vendor="X.Org
Foundation"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: compiled for 1.16.1, module version =
7.5.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Module class: X.Org Video Driver
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ABI class: X.Org Video Driver,
version 18.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) LoadModule: "radeon"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading
/usr/lib/xorg/modules/drivers/radeon_drv.so
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Module radeon: vendor="X.Org
Foundation"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: compiled for 1.16.1, module version =
7.5.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Module class: X.Org Video Driver
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ABI class: X.Org Video Driver,
version 18.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) LoadModule: "modesetting"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading
/usr/lib/xorg/modules/drivers/modesetting_drv.so
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Module modesetting:
vendor="X.Org Foundation"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: compiled for 1.16.4, module version =
0.9.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Module class: X.Org Video Driver
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ABI class: X.Org Video Driver,
version 18.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) LoadModule: "fbdev"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading
/usr/lib/xorg/modules/drivers/fbdev_drv.so
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Module fbdev: vendor="X.Org
Foundation"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: compiled for 1.15.99.904, module
version = 0.4.4
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Module class: X.Org Video Driver
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ABI class: X.Org Video Driver,
version 18.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) LoadModule: "vesa"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading
/usr/lib/xorg/modules/drivers/vesa_drv.so
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Module vesa: vendor="X.Org
Foundation"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: compiled for 1.15.99.904, module
version = 2.3.3
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Module class: X.Org Video Driver
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ABI class: X.Org Video Driver,
version 18.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON: Driver for ATI Radeon
chipsets:
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility X600 (M24) 3150
(PCIE), ATI FireMV 2400 (PCI),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility X300 (M24) 3152
(PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL M24 GL 3154 (PCIE), ATI
FireMV 2400 3155 (PCI),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X600 (RV380) 3E50 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon IGP320 (A3) 4136,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon 9500 AD (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9500 AE (AGP), ATI Radeon
9600TX AF (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL Z1 AG (AGP), ATI Radeon
9800SE AH (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9800 AI (AGP), ATI Radeon
9800 AJ (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL X2 AK (AGP), ATI Radeon
9600 AP (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9600SE AQ (AGP), ATI
Radeon 9600XT AR (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9600 AS (AGP), ATI FireGL
T2 AT (AGP), ATI Radeon 9650,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL RV360 AV (AGP), ATI Radeon
7000 IGP (A4+) 4237,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 8500 AIW BB (AGP), ATI
Radeon IGP320M (U1) 4336,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon IGP330M/340M/350M (U2)
4337,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility 7000 IGP 4437,
ATI Radeon 9000/PRO If (AGP/PCI),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9000 Ig (AGP/PCI), ATI
Radeon X800 (R420) JH (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X800PRO (R420) JI (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X800SE (R420) JJ (AGP),
ATI Radeon X800 (R420) JK (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X800 (R420) JL (AGP), ATI
FireGL X3 (R420) JM (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility 9800 (M18) JN
(AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X800 SE (R420) (AGP), ATI
Radeon X800XT (R420) JP (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X800 VE (R420) JT (AGP),
ATI Radeon X850 (R480) (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X850 XT (R480) (AGP), ATI
Radeon X850 SE (R480) (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X850 PRO (R480) (AGP), ATI
Radeon X850 XT PE (R480) (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility M7 LW (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility FireGL 7800 M7 LX (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility M6 LY (AGP), ATI
Radeon Mobility M6 LZ (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL Mobility 9000 (M9) Ld
(AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility 9000 (M9) Lf
(AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility 9000 (M9) Lg
(AGP), ATI FireMV 2400 PCI,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9700 Pro ND (AGP), ATI
Radeon 9700/9500Pro NE (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9600TX NF (AGP), ATI
FireGL X1 NG (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9800PRO NH (AGP), ATI
Radeon 9800 NI (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL X2 NK (AGP), ATI Radeon
9800XT NJ (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility 9600/9700
(M10/M11) NP (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility 9600 (M10) NQ
(AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility 9600 (M11) NR
(AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility 9600 (M10) NS
(AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL Mobility T2 (M10) NT
(AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL Mobility T2e (M11) NV
(AGP), ATI Radeon QD (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon QE (AGP), ATI Radeon QF
(AGP), ATI Radeon QG (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL 8700/8800 QH (AGP), ATI
Radeon 8500 QL (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9100 QM (AGP), ATI Radeon
7500 QW (AGP/PCI),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 7500 QX (AGP/PCI), ATI
Radeon VE/7000 QY (AGP/PCI),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon VE/7000 QZ (AGP/PCI), ATI
ES1000 515E (PCI),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility X300 (M22) 5460
(PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility X600 SE (M24C)
5462 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL M22 GL 5464 (PCIE), ATI
Radeon X800 (R423) UH (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X800PRO (R423) UI (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X800LE (R423) UJ (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X800SE (R423) UK (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X800 XL (R430) (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X800 SE (R430) (PCIE), ATI
Radeon X800 (R430) (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL V7100 (R423) (PCIE), ATI
FireGL V5100 (R423) UQ (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL unknown (R423) UR (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL unknown (R423) UT (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility FireGL V5000 (M26)
(PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility FireGL V5000 (M26)
(PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X700 XL (M26)
(PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X700 (M26)
(PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X700 (M26)
(PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X550XTX 5657 (PCIE), ATI
Radeon 9100 IGP (A5) 5834,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility 9100 IGP (U3)
5835,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon XPRESS 200 5954 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon 9250 5960 (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9200 5961 (AGP), ATI
Radeon 9200 5962 (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9200SE 5964 (AGP), ATI
FireMV 2200 (PCI),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI ES1000 5969 (PCI), ATI Radeon
XPRESS 200 5974 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon XPRESS 200M 5975 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon XPRESS 200 5A41 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon XPRESS 200M 5A42 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon XPRESS 200 5A61 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon XPRESS 200M 5A62 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X300 (RV370) 5B60 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X600 (RV370) 5B62 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X550 (RV370) 5B63 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL V3100 (RV370) 5B64 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireMV 2200 PCIE (RV370) 5B65
(PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility 9200 (M9+) 5C61
(AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon Mobility 9200 (M9+) 5C63
(AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X800 XT (M28)
(PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility FireGL V5100 (M28)
(PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X800 (M28)
(PCIE), ATI Radeon X850 5D4C (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X850 XT PE (R480) (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X850 SE (R480) (PCIE), ATI
Radeon X850 PRO (R480) (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI unknown Radeon / FireGL (R480)
5D50 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X850 XT (R480) (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X800XT (R423) 5D57 (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL V5000 (RV410) (PCIE), ATI
Radeon X700 XT (RV410) (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X700 PRO (RV410) (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X700 (RV410) (PCIE),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X1800,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X1800 XT, ATI
Mobility Radeon X1800,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility FireGL V7200, ATI FireGL
V7200, ATI FireGL V5300,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility FireGL V7100, ATI Radeon
X1800, ATI Radeon X1800,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL V7300, ATI FireGL V7350,
ATI Radeon X1600, ATI RV505,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1300/X1550, ATI Radeon
X1550, ATI M54-GL,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X1400, ATI Radeon
X1300/X1550,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1550 64-bit, ATI Mobility
Radeon X1300,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X1300, ATI
Mobility Radeon X1300,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X1300, ATI Radeon
X1300, ATI Radeon X1300,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI RV505, ATI RV505, ATI FireGL
V3300, ATI FireGL V3350,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1300, ATI Radeon X1550
64-bit, ATI Radeon X1300/X1550,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1600, ATI Radeon
X1300/X1550, ATI Mobility Radeon X1450,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1300/X1550, ATI Mobility
Radeon X2300,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X2300, ATI
Mobility Radeon X1350,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X1350, ATI
Mobility Radeon X1450,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1300, ATI Radeon X1550,
ATI Mobility Radeon X1350,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireMV 2250, ATI Radeon X1550
64-bit, ATI Radeon X1600,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1600,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility FireGL V5200, ATI
Mobility Radeon X1600,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1650, ATI Radeon X1650,
ATI Radeon X1600,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1300 XT/X1600 Pro, ATI
FireGL V3400,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility FireGL V5250, ATI
Mobility Radeon X1700,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X1700 XT, ATI
FireGL V5200,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon X1700, ATI Radeon
X2300HD,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 2300, ATI
Mobility Radeon HD 2300,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1950, ATI Radeon X1900,
ATI Radeon X1950,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI AMD Stream Processor, ATI Radeon
X1900, ATI Radeon X1950,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI RV560, ATI RV560, ATI Mobility
Radeon X1900, ATI RV560,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1950 GT, ATI RV570, ATI
RV570, ATI FireGL V7400,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI RV560, ATI Radeon X1650, ATI
Radeon X1650, ATI RV560,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 9100 PRO IGP 7834, ATI
Radeon Mobility 9200 IGP 7835,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon X1200, ATI Radeon X1200,
ATI RS740, ATI RS740M, ATI RS740,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI RS740M, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 2900 XT, ATI Radeon HD
2900 Pro, ATI Radeon HD 2900 GT,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL V8650, ATI FireGL V8600,
ATI FireGL V7600,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 4800 Series, ATI Radeon HD
4870 x2,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 4800 Series, ATI Radeon HD
4850 x2,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro V8750 (FireGL), ATI
FirePro V7760 (FireGL),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility RADEON HD 4850, ATI
Mobility RADEON HD 4850 X2,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 4800 Series, ATI FirePro
RV770, AMD FireStream 9270,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: AMD FireStream 9250, ATI FirePro
V8700 (FireGL),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility RADEON HD 4870, ATI
Mobility RADEON M98,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility RADEON HD 4870, ATI
Radeon 4800 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 4800 Series, ATI FirePro
M7750, ATI M98, ATI M98, ATI M98,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 4650, ATI
Radeon RV730 (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 4670, ATI
FirePro M5750,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 4670, ATI
Radeon RV730 (AGP),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI RV730XT [Radeon HD 4670], ATI
RADEON E4600,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 4600 Series, ATI RV730
PRO [Radeon HD 4650],
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro V7750 (FireGL), ATI
FirePro V5700 (FireGL),
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro V3750 (FireGL), ATI
Mobility Radeon HD 4830,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 4850, ATI
FirePro M7740, ATI RV740,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 4770, ATI Radeon HD
4700 Series, ATI Radeon HD 4770,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro M5750, ATI RV610, ATI
Radeon HD 2400 XT,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 2400 Pro, ATI Radeon HD
2400 PRO AGP, ATI FireGL V4000,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI RV610, ATI Radeon HD 2350, ATI
Mobility Radeon HD 2400 XT,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 2400, ATI
RADEON E2400, ATI RV610,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireMV 2260, ATI RV670, ATI
Radeon HD3870,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 3850, ATI
Radeon HD3850,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 3850 X2, ATI
RV670,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 3870, ATI
Mobility Radeon HD 3870 X2,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD3870 X2, ATI FireGL
V7700, ATI Radeon HD3850,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD3690, AMD Firestream
9170, ATI Radeon HD 4550,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon RV710,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 4350, ATI Mobility
Radeon 4300 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon 4500 Series, ATI
Mobility Radeon 4500 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro RG220, ATI Mobility
Radeon 4330, ATI RV630,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 2600, ATI
Mobility Radeon HD 2600 XT,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 2600 XT AGP, ATI Radeon
HD 2600 Pro AGP,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 2600 XT, ATI Radeon HD
2600 Pro, ATI Gemini RV630,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Gemini Mobility Radeon HD 2600
XT, ATI FireGL V5600,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireGL V3600, ATI Radeon HD 2600
LE,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility FireGL Graphics
Processor, ATI Radeon HD 3470,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 3430, ATI
Mobility Radeon HD 3400 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 3450, ATI Radeon HD
3450, ATI Radeon HD 3430,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 3450, ATI FirePro
V3700, ATI FireMV 2450,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FireMV 2260, ATI FireMV 2260, ATI
Radeon HD 3600 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 3650 AGP, ATI Radeon HD
3600 PRO,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 3600 XT, ATI Radeon HD
3600 PRO,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 3650, ATI
Mobility Radeon HD 3670,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility FireGL V5700, ATI
Mobility FireGL V5725,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 3200 Graphics, ATI
Radeon 3100 Graphics,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 3200 Graphics, ATI
Radeon 3100 Graphics,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 3300 Graphics, ATI
Radeon HD 3200 Graphics,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 3000 Graphics, SUMO, SUMO,
SUMO2, SUMO2, SUMO2, SUMO2,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO,
SUMO, SUMO, ATI Radeon HD 4200,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon 4100, ATI Mobility Radeon
HD 4200,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon 4100, ATI Radeon
HD 4290, ATI Radeon HD 4250,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: AMD Radeon HD 6310 Graphics, AMD
Radeon HD 6310 Graphics,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: AMD Radeon HD 6250 Graphics, AMD
Radeon HD 6250 Graphics,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: AMD Radeon HD 6300 Series Graphics,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: AMD Radeon HD 6200 Series Graphics,
PALM, PALM, PALM, CYPRESS,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro (FireGL) Graphics
Adapter,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro (FireGL) Graphics
Adapter,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro (FireGL) Graphics
Adapter, AMD Firestream 9370,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: AMD Firestream 9350, ATI Radeon HD
5800 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 5800 Series, ATI Radeon
HD 5800 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 5800 Series, ATI Radeon
HD 5900 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 5900 Series, ATI
Mobility Radeon HD 5800 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 5800 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro (FireGL) Graphics
Adapter,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro (FireGL) Graphics
Adapter,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 5800 Series,
ATI Radeon HD 5700 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 5700 Series, ATI Radeon
HD 6700 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 5700 Series, ATI Radeon
HD 6700 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 5000 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5570,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro (FireGL) Graphics
Adapter,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro (FireGL) Graphics
Adapter, ATI Radeon HD 5670,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 5570, ATI Radeon HD
5500 Series, REDWOOD,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 5000 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon Graphics,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Mobility Radeon Graphics, CEDAR,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro (FireGL) Graphics
Adapter,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI FirePro (FireGL) Graphics
Adapter, ATI FirePro 2270, CEDAR,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ATI Radeon HD 5450, CEDAR, CEDAR,
CAYMAN, CAYMAN, CAYMAN, CAYMAN,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: AMD Radeon HD 6900 Series, AMD Radeon
HD 6900 Series, CAYMAN, CAYMAN,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: CAYMAN, AMD Radeon HD 6900M Series,
Mobility Radeon HD 6000 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: BARTS, BARTS, Mobility Radeon HD 6000
Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: Mobility Radeon HD 6000 Series,
BARTS, BARTS, BARTS, BARTS,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: AMD Radeon HD 6800 Series, AMD Radeon
HD 6800 Series,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: AMD Radeon HD 6700 Series, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
TAHITI, TAHITI, TAHITI, TAHITI,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: TAHITI, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: VERDE, VERDE, VERDE, VERDE, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: HAINAN, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, BONAIRE, BONAIRE,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: BONAIRE, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: KABINI, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: MULLINS, MULLINS, MULLINS, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: KAVERI, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII,
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) modesetting: Driver for
Modesetting Kernel Drivers: kms
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) FBDEV: driver for framebuffer:
fbdev
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) VESA: driver for VESA chipsets:
vesa
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (++) using VT number 7
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) [KMS] Kernel modesetting
enabled.
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (WW) Falling back to old probe method
for modesetting
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (WW) Falling back to old probe method
for fbdev
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading sub module "fbdevhw"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) LoadModule: "fbdevhw"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading
/usr/lib/xorg/modules/libfbdevhw.so
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Module fbdevhw: vendor="X.Org
Foundation"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: compiled for 1.16.4, module version =
0.0.2
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ABI class: X.Org Video Driver,
version 18.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (WW) Falling back to old probe method
for vesa
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Creating default
Display subsection in Screen section
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: "Default Screen Section" for
depth/fbbpp 24/32
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) RADEON(0): Depth 24, (--)
framebuffer bpp 32
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Pixel depth = 24 bits
stored in 4 bytes (32 bpp pixmaps)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) RADEON(0): Default visual is
TrueColor
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) RADEON(0): RGB weight 888
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using 8 bits per RGB
(8 bit DAC)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (--) RADEON(0): Chipset: "ATI Radeon
HD 5670" (ChipID = 0x68d8)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading sub module "dri2"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) LoadModule: "dri2"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Module "dri2" already built-in
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading sub module "exa"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) LoadModule: "exa"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading
/usr/lib/xorg/modules/libexa.so
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Module exa: vendor="X.Org
Foundation"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: compiled for 1.16.4, module version =
2.6.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: ABI class: X.Org Video Driver,
version 18.0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): KMS Color Tiling:
enabled
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): KMS Color Tiling 2D:
enabled
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): KMS Pageflipping:
enabled
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): SwapBuffers wait for
vsync: enabled
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Output DisplayPort-0
has no monitor section
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Output HDMI-0 has no
monitor section
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Output DVI-0 has no
monitor section
Apr 15 09:17:28 emperor colord: Profile added: Photosmart-B010-series-Gray..
Apr 15 09:17:28 emperor colord: Profile added: Photosmart-B010-series-RGB..
Apr 15 09:17:28 emperor colord[613]: (colord:613): Cd-WARNING **: failed to get
session [pid 582]: Erreur inconnue -2
Apr 15 09:17:28 emperor colord: Device added: cups-Photosmart-B010-series
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Output DVI-1 has no
monitor section
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID for output
DisplayPort-0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID for output
HDMI-0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID for output DVI-0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Manufacturer: ACR
Model: ad10 Serial#: 7409
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Year: 2005 Week: 3
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID Version: 1.3
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Analog Display Input,
Input Voltage Level: 0.700/0.700 V
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Sync: Separate
CompositeSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Max Image Size [cm]:
horiz.: 37 vert.: 30
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Gamma: 2.20
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): DPMS capabilities:
StandBy Suspend Off; RGB/Color Display
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): First detailed timing
is preferred mode
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): redX: 0.647 redY:
0.346 greenX: 0.292 greenY: 0.602
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): blueX: 0.149 blueY:
0.130 whiteX: 0.312 whiteY: 0.328
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Supported established
timings:
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 720x400 at 70Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 640x480 at 60Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 640x480 at 67Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 640x480 at 72Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 640x480 at 75Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 800x600 at 56Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 800x600 at 60Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 800x600 at 72Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 800x600 at 75Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 832x624 at 75Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 1024x768 at 60Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 1024x768 at 70Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 1024x768 at 75Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): 1280x1024 at 75Hz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Manufacturer's mask:
0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Supported standard
timings:
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): #0: hsize: 1280
vsize 1024 refresh: 60 vid: 32897
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Supported detailed
timing:
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): clock: 108.0 MHz
Image Size: 375 x 301 mm
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): h_active: 1280
h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): v_active: 1024
v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Serial No: ETL2302119
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Ranges: V min: 56 V
max: 75 Hz, H min: 24 H max: 80 kHz, PixClock max 145 MHz
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Monitor name: Acer
AL1911
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID (in hex):
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0):
#01100ffffffffffff00047210adf11c0000
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0):
#011030f01036d251e78eaec50a5584a9a26
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0):
#011215054bfef0081800101010101010101
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0):
#011010101010101302a009851002a403070
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0):
#0111300772d1100001e000000ff0045544c
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0):
#011323330323131390a2020000000fd0038
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0):
#0114b18500e000a202020202020000000fc
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0):
#011004163657220414c313931310a20003c
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Printing probed modes
for output DVI-0
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
+vsync (64.0 kHz eP)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
+vsync (80.0 kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(60.1 kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(56.5 kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(48.4 kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7
kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2
kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0
kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
kHz e)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID for output DVI-1
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Output DisplayPort-0
disconnected
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Output HDMI-0
disconnected
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Output DVI-0
connected
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Output DVI-1
disconnected
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using exact sizes for
initial modes
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Output DVI-0 using
initial mode 1280x1024
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using default gamma
of (1.0, 1.0, 1.0) unless otherwise stated.
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): mem size init: gart
size :3fdee000 vram size: s:40000000 visible:3fac0000
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EXA: Driver will
allow EXA pixmaps in VRAM
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (==) RADEON(0): DPI set to (96, 96)
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading sub module "fb"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) LoadModule: "fb"
Apr 15 09:17:28 emperor gdm-Xorg-:0[612]: (II) Loading
/usr/lib/xorg/modules/libfb.so
Apr 15 09:17:28 emperor kernel: [ 17.903837] sky2 0000:02:00.0 eth0: Link is
up at 100 Mbps, full duplex, flow control both
Apr 15 09:17:28 emperor kernel: [ 17.903860] IPv6: ADDRCONF(NETDEV_CHANGE):
eth0: link becomes ready
Apr 15 09:17:28 emperor NetworkManager[529]: <info> (eth0): link connected
Apr 15 09:17:28 emperor NetworkManager[529]: <info> (eth0): device state
change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Apr 15 09:17:28 emperor NetworkManager[529]: <info> Auto-activating connection
'Wired connection 1'.
Apr 15 09:17:28 emperor NetworkManager[529]: <info> Activation (eth0) starting
connection 'Wired connection 1'
Apr 15 09:17:28 emperor NetworkManager[529]: <info> Activation (eth0) Stage 1
of 5 (Device Prepare) scheduled...
Apr 15 09:17:28 emperor NetworkManager[529]: <info> Activation (eth0) Stage 1
of 5 (Device Prepare) started...
Apr 15 09:17:28 emperor NetworkManager[529]: <info> (eth0): device state
change: disconnected -> prepare (reason 'none') [30 40 0]
Apr 15 09:17:28 emperor NetworkManager[529]: <info> NetworkManager state is now
CONNECTING
Apr 15 09:17:28 emperor NetworkManager[529]: <info> Activation (eth0) Stage 2
of 5 (Device Configure) scheduled...
Apr 15 09:17:28 emperor NetworkManager[529]: <info> Activation (eth0) Stage 1
of 5 (Device Prepare) complete.
Apr 15 09:17:28 emperor NetworkManager[529]: <info> Activation (eth0) Stage 2
of 5 (Device Configure) starting...
Apr 15 09:17:28 emperor NetworkManager[529]: <info> (eth0): device state
change: prepare -> config (reason 'none') [40 50 0]
Apr 15 09:17:28 emperor NetworkManager[529]: <info> Activation (eth0) Stage 2
of 5 (Device Configure) successful.
Apr 15 09:17:28 emperor NetworkManager[529]: <info> Activation (eth0) Stage 3
of 5 (IP Configure Start) scheduled.
Apr 15 09:17:28 emperor NetworkManager[529]: <info> Activation (eth0) Stage 2
of 5 (Device Configure) complete.
Apr 15 09:17:28 emperor NetworkManager[529]: <info> Activation (eth0) Stage 3
of 5 (IP Configure Start) started...
Apr 15 09:17:28 emperor NetworkManager[529]: <info> (eth0): device state
change: config -> ip-config (reason 'none') [50 70 0]
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) Module fb: vendor="X.Org
Foundation"
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: compiled for 1.16.4, module version =
1.0.0
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: ABI class: X.Org ANSI C Emulation,
version 0.4
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) Loading sub module "ramdac"
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) LoadModule: "ramdac"
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) Module "ramdac" already built-in
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) UnloadModule: "modesetting"
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) Unloading modesetting
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) UnloadModule: "fbdev"
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) Unloading fbdev
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) UnloadSubModule: "fbdevhw"
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) Unloading fbdevhw
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) UnloadModule: "vesa"
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) Unloading vesa
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (--) Depth 24 pixmap format is 32 bpp
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): [DRI2] Setup complete
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): [DRI2] DRI driver:
r600
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): [DRI2] VDPAU
driver: r600
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Front buffer size:
5120K
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): VRAM usage limit set
to 934185K
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (==) RADEON(0): Backing store enabled
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Direct rendering
enabled
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) EXA(0): Driver allocated
offscreen pixmaps
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) EXA(0): Driver registered
support for the following operations:
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) Solid
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) Copy
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) Composite (RENDER
acceleration)
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) UploadToScreen
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) DownloadFromScreen
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Acceleration enabled
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (==) RADEON(0): DPMS enabled
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (==) RADEON(0): Silken mouse enabled
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Set up textured video
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): [XvMC] Associated
with Radeon Textured Video.
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): [XvMC] Extension
initialized.
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): RandR 1.2 enabled,
ignore the following RandR disabled message.
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (--) RandR disabled
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) SELinux: Disabled on system
Apr 15 09:17:29 emperor NetworkManager[529]: <info> Activation (eth0) Beginning
DHCPv4 transaction (timeout in 45 seconds)
Apr 15 09:17:29 emperor colord: Profile added: Photosmart_B010-Gray..
Apr 15 09:17:29 emperor colord: Profile added: Photosmart_B010-RGB..
Apr 15 09:17:29 emperor colord[613]: (colord:613): Cd-WARNING **: failed to get
session [pid 582]: Erreur inconnue -2
Apr 15 09:17:29 emperor colord: Device added: cups-Photosmart_B010
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) AIGLX: enabled
GLX_MESA_copy_sub_buffer
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) AIGLX: enabled
GLX_ARB_create_context
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) AIGLX: enabled
GLX_ARB_create_context_profile
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) AIGLX: enabled
GLX_EXT_create_context_es2_profile
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) AIGLX: enabled
GLX_INTEL_swap_event
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) AIGLX: enabled
GLX_SGI_swap_control and GLX_MESA_swap_control
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) AIGLX: enabled
GLX_EXT_framebuffer_sRGB
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) AIGLX: enabled
GLX_ARB_fbconfig_float
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) AIGLX:
GLX_EXT_texture_from_pixmap backed by buffer objects
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) AIGLX: Loaded and initialized
r600
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) GLX: Initialized DRI2 GL
provider for screen 0
Apr 15 09:17:29 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Setting screen
physical size to 338 x 270
Apr 15 09:17:30 emperor ModemManager[528]: <warn> Couldn't find support for
device at '/sys/devices/pci0000:00/0000:00:1c.5/0000:02:00.0': not supported by
any plugin
Apr 15 09:17:30 emperor NetworkManager[529]: <info> dhclient started with pid
623
Apr 15 09:17:30 emperor NetworkManager[529]: <info> Activation (eth0) Stage 3
of 5 (IP Configure Start) complete.
Apr 15 09:17:30 emperor NetworkManager[529]: <info> (eth0): DHCPv4 state
changed nbi -> preinit
Apr 15 09:17:30 emperor dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port
67
Apr 15 09:17:30 emperor dhclient: DHCPACK from 192.168.1.1
Apr 15 09:17:30 emperor NetworkManager[529]: <info> (eth0): DHCPv4 state
changed preinit -> reboot
Apr 15 09:17:30 emperor NetworkManager[529]: <info> address 192.168.1.24
Apr 15 09:17:30 emperor NetworkManager[529]: <info> plen 24 (255.255.255.0)
Apr 15 09:17:30 emperor NetworkManager[529]: <info> gateway 192.168.1.1
Apr 15 09:17:30 emperor NetworkManager[529]: <info> server identifier
192.168.1.1
Apr 15 09:17:30 emperor NetworkManager[529]: <info> lease time 86400
Apr 15 09:17:30 emperor NetworkManager[529]: <info> nameserver '192.168.1.1'
Apr 15 09:17:30 emperor NetworkManager[529]: <info> nameserver '192.168.1.1'
Apr 15 09:17:30 emperor NetworkManager[529]: <info> domain name 'home'
Apr 15 09:17:30 emperor NetworkManager[529]: <info> Activation (eth0) Stage 5
of 5 (IPv4 Configure Commit) scheduled...
Apr 15 09:17:30 emperor NetworkManager[529]: <info> Activation (eth0) Stage 5
of 5 (IPv4 Commit) started...
Apr 15 09:17:30 emperor avahi-daemon[536]: Joining mDNS multicast group on
interface eth0.IPv4 with address 192.168.1.24.
Apr 15 09:17:30 emperor avahi-daemon[536]: New relevant interface eth0.IPv4 for
mDNS.
Apr 15 09:17:30 emperor avahi-daemon[536]: Registering new address record for
192.168.1.24 on eth0.IPv4.
Apr 15 09:17:30 emperor NetworkManager[529]: <info> (eth0): device state
change: ip-config -> ip-check (reason 'none') [70 80 0]
Apr 15 09:17:30 emperor NetworkManager[529]: <info> Activation (eth0) Stage 5
of 5 (IPv4 Commit) complete.
Apr 15 09:17:30 emperor NetworkManager[529]: <info> (eth0): device state
change: ip-check -> secondaries (reason 'none') [80 90 0]
Apr 15 09:17:30 emperor NetworkManager[529]: <info> (eth0): device state
change: secondaries -> activated (reason 'none') [90 100 0]
Apr 15 09:17:30 emperor NetworkManager[529]: <info> NetworkManager state is now
CONNECTED_LOCAL
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
Power Button (/dev/input/event3)
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (**) Power Button: Applying
InputClass "evdev keyboard catchall"
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (II) LoadModule: "evdev"
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (II) Loading
/usr/lib/xorg/modules/input/evdev_drv.so
Apr 15 09:17:30 emperor dhclient: bound to 192.168.1.24 -- renewal in 39847
seconds.
Apr 15 09:17:30 emperor NetworkManager[529]: <info> NetworkManager state is now
CONNECTED_GLOBAL
Apr 15 09:17:30 emperor NetworkManager[529]: <info> Policy set 'Wired
connection 1' (eth0) as default for IPv4 routing and DNS.
Apr 15 09:17:30 emperor NetworkManager[529]: <info> Activation (eth0)
successful, device activated.
Apr 15 09:17:30 emperor dbus[537]: [system] Activating via systemd: service
name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-
dispatcher.service'
Apr 15 09:17:30 emperor dbus[537]: [system] Successfully activated service
'org.freedesktop.nm_dispatcher'
Apr 15 09:17:30 emperor nm-dispatcher: Dispatching action 'up' for eth0
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (II) Module evdev: vendor="X.Org
Foundation"
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: compiled for 1.16.0, module version =
2.9.0
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: Module class: X.Org XInput Driver
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: ABI class: X.Org XInput driver,
version 21.0
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (II) Using input driver 'evdev' for
'Power Button'
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (**) Power Button: always reports
core events
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (**) evdev: Power Button: Device:
"/dev/input/event3"
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (--) evdev: Power Button: Vendor 0
Product 0x1
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (--) evdev: Power Button: Found keys
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (II) evdev: Power Button: Configuring
as keyboard
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (II) XINPUT: Adding extended input
device "Power Button" (type: KEYBOARD, id 6)
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (**) Option "xkb_rules" "evdev"
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (**) Option "xkb_model" "pc105"
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (**) Option "xkb_layout" "fr"
Apr 15 09:17:30 emperor gdm-Xorg-:0[612]: (**) Option "xkb_variant" "latin9"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: The XKEYBOARD keymap compiler
(xkbcomp) reports:
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: > Warning: Type "ONE_LEVEL"
has 1 levels, but <RALT> has 2 symbols
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: > Ignoring extra
symbols
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: Errors from xkbcomp are not fatal to
the X server
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
Power Button (/dev/input/event2)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Power Button: Applying
InputClass "evdev keyboard catchall"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) Using input driver 'evdev' for
'Power Button'
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Power Button: always reports
core events
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) evdev: Power Button: Device:
"/dev/input/event2"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (--) evdev: Power Button: Vendor 0
Product 0x1
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (--) evdev: Power Button: Found keys
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) evdev: Power Button: Configuring
as keyboard
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) XINPUT: Adding extended input
device "Power Button" (type: KEYBOARD, id 7)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_rules" "evdev"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_model" "pc105"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_layout" "fr"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_variant" "latin9"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event15)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
Logitech USB Optical Mouse (/dev/input/event1)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Logitech USB Optical Mouse:
Applying InputClass "evdev pointer catchall"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) Using input driver 'evdev' for
'Logitech USB Optical Mouse'
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Logitech USB Optical Mouse:
always reports core events
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) evdev: Logitech USB Optical
Mouse: Device: "/dev/input/event1"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (--) evdev: Logitech USB Optical
Mouse: Vendor 0x46d Product 0xc018
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (--) evdev: Logitech USB Optical
Mouse: Found 3 mouse buttons
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (--) evdev: Logitech USB Optical
Mouse: Found scroll wheel(s)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (--) evdev: Logitech USB Optical
Mouse: Found relative axes
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (--) evdev: Logitech USB Optical
Mouse: Found x and y relative axes
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) evdev: Logitech USB Optical
Mouse: Configuring as mouse
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) evdev: Logitech USB Optical
Mouse: Adding scrollwheel support
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) evdev: Logitech USB Optical
Mouse: YAxisMapping: buttons 4 and 5
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) evdev: Logitech USB Optical
Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046D:C018.0002/input/input2/event1"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) XINPUT: Adding extended input
device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) evdev: Logitech USB Optical
Mouse: initialized for relative axes.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Logitech USB Optical Mouse:
(accel) keeping acceleration scheme 1
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Logitech USB Optical Mouse:
(accel) acceleration profile 0
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Logitech USB Optical Mouse:
(accel) acceleration factor: 2.000
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Logitech USB Optical Mouse:
(accel) acceleration threshold: 4
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
Logitech USB Optical Mouse (/dev/input/mouse0)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
LITEON Technology USB Multimedia Keyboard (/dev/input/event0)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) LITEON Technology USB Multimedia
Keyboard: Applying InputClass "evdev keyboard catchall"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) Using input driver 'evdev' for
'LITEON Technology USB Multimedia Keyboard'
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) LITEON Technology USB Multimedia
Keyboard: always reports core events
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) evdev: LITEON Technology USB
Multimedia Keyboard: Device: "/dev/input/event0"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (--) evdev: LITEON Technology USB
Multimedia Keyboard: Vendor 0x46d Product 0xc312
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (--) evdev: LITEON Technology USB
Multimedia Keyboard: Found keys
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) evdev: LITEON Technology USB
Multimedia Keyboard: Configuring as keyboard
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:046D:C312.0001/input/input1/event0"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) XINPUT: Adding extended input
device "LITEON Technology USB Multimedia Keyboard" (type: KEYBOARD, id 9)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_rules" "evdev"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_model" "pc105"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_layout" "fr"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_variant" "latin9"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
UVC Camera (046d:0990) (/dev/input/event14)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) UVC Camera (046d:0990): Applying
InputClass "evdev keyboard catchall"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) Using input driver 'evdev' for
'UVC Camera (046d:0990)'
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) UVC Camera (046d:0990): always
reports core events
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) evdev: UVC Camera (046d:0990):
Device: "/dev/input/event14"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (--) evdev: UVC Camera (046d:0990):
Vendor 0x46d Product 0x990
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (--) evdev: UVC Camera (046d:0990):
Found keys
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) evdev: UVC Camera (046d:0990):
Configuring as keyboard
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input15/event14"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) XINPUT: Adding extended input
device "UVC Camera (046d:0990)" (type: KEYBOARD, id 10)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_rules" "evdev"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_model" "pc105"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_layout" "fr"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (**) Option "xkb_variant" "latin9"
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
HDA Digital PCBeep (/dev/input/event5)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
HDA Intel Line Out Front (/dev/input/event9)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
HDA Intel Line Out Surround (/dev/input/event10)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
HDA Intel Line Out CLFE (/dev/input/event11)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
HDA Intel Line Out Side (/dev/input/event12)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
HDA Intel Front Headphone (/dev/input/event13)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
HDA Intel Front Mic (/dev/input/event6)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
HDA Intel Rear Mic (/dev/input/event7)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
HDA Intel Line (/dev/input/event8)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) config/udev: Adding input device
PC Speaker (/dev/input/event4)
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) No input driver specified,
ignoring this device.
Apr 15 09:17:31 emperor gdm-Xorg-:0[612]: (II) This device may have been added
with another device file.
Apr 15 09:17:31 emperor gdm3[605]: Failed to give slave programs access to the
display. Trying to proceed.
Apr 15 09:17:31 emperor avahi-daemon[536]: Joining mDNS multicast group on
interface eth0.IPv6 with address fe80::21d:60ff:febc:f692.
Apr 15 09:17:31 emperor avahi-daemon[536]: New relevant interface eth0.IPv6 for
mDNS.
Apr 15 09:17:31 emperor avahi-daemon[536]: Registering new address record for
fe80::21d:60ff:febc:f692 on eth0.*.
Apr 15 09:17:32 emperor systemd[700]: Starting Paths.
Apr 15 09:17:32 emperor systemd[700]: Reached target Paths.
Apr 15 09:17:32 emperor systemd[700]: Starting Timers.
Apr 15 09:17:32 emperor systemd[700]: Reached target Timers.
Apr 15 09:17:32 emperor systemd[700]: Starting Sockets.
Apr 15 09:17:32 emperor systemd[700]: Reached target Sockets.
Apr 15 09:17:32 emperor systemd[700]: Starting Basic System.
Apr 15 09:17:32 emperor systemd[700]: Reached target Basic System.
Apr 15 09:17:32 emperor systemd[700]: Starting Default.
Apr 15 09:17:32 emperor systemd[700]: Reached target Default.
Apr 15 09:17:32 emperor systemd[700]: Startup finished in 30ms.
Apr 15 09:17:33 emperor org.a11y.Bus[707]: Activating service
name='org.a11y.atspi.Registry'
Apr 15 09:17:33 emperor org.a11y.Bus[707]: Successfully activated service
'org.a11y.atspi.Registry'
Apr 15 09:17:33 emperor org.a11y.atspi.Registry[714]: SpiRegistry daemon is
running with well-known name - org.a11y.atspi.Registry
Apr 15 09:17:34 emperor NetworkManager[529]: <info> startup complete
Apr 15 09:17:34 emperor minissdpd[725]: Starting UPnP devices daemon:
MiniSSDPd.
Apr 15 09:17:34 emperor rpcbind[727]: Starting rpcbind daemon....
Apr 15 09:17:34 emperor ntpd[766]: ntpd 4.2.6p5 at 1.2349-o Wed Oct 28 20:16:08
UTC 2015 (1)
Apr 15 09:17:34 emperor ntp[726]: Starting NTP server: ntpd.
Apr 15 09:17:34 emperor ntpd[771]: proto: precision = 0.105 usec
Apr 15 09:17:34 emperor ntpd[771]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP
123
Apr 15 09:17:34 emperor ntpd[771]: Listen and drop on 1 v6wildcard :: UDP 123
Apr 15 09:17:34 emperor ntpd[771]: Listen normally on 2 lo 127.0.0.1 UDP 123
Apr 15 09:17:34 emperor ntpd[771]: Listen normally on 3 eth0 192.168.1.24 UDP
123
Apr 15 09:17:34 emperor ntpd[771]: Listen normally on 4 lo ::1 UDP 123
Apr 15 09:17:34 emperor ntpd[771]: Listen normally on 5 eth0
fe80::21d:60ff:febc:f692 UDP 123
Apr 15 09:17:34 emperor ntpd[771]: peers refreshed
Apr 15 09:17:34 emperor ntpd[771]: Listening on routing socket on fd #22 for
interface updates
Apr 15 09:17:35 emperor kernel: [ 23.983157] vboxdrv: Found 4 processor
cores.
Apr 15 09:17:35 emperor kernel: [ 23.983347] vboxdrv: fAsync=0 offMin=0x372
offMax=0x15e7
Apr 15 09:17:35 emperor kernel: [ 23.983435] vboxdrv: TSC mode is
'synchronous', kernel timer mode is 'normal'.
Apr 15 09:17:35 emperor kernel: [ 23.983436] vboxdrv: Successfully loaded
version 4.3.36_Debian (interface 0x001a000b).
Apr 15 09:17:35 emperor gnome-session[703]: gnome-session[703]: WARNING: Could
not parse desktop file caribou-autostart.desktop or it references a not found
TryExec binary
Apr 15 09:17:35 emperor gnome-session[703]: WARNING: Could not parse desktop
file caribou-autostart.desktop or it references a not found TryExec binary
Apr 15 09:17:35 emperor virtualbox[724]: Starting VirtualBox kernel modules.
Apr 15 09:17:35 emperor kernel: [ 24.844693] vboxpci: IOMMU not found (not
registered)
Apr 15 09:17:36 emperor minidlna[722]: Starting DLNA/UPnP-AV media server :
minidlna.
Apr 15 09:17:36 emperor dbus[537]: [system] Activating via systemd: service
name='org.freedesktop.UPower' unit='upower.service'
Apr 15 09:17:36 emperor dbus[537]: [system] Successfully activated service
'org.freedesktop.UPower'
Apr 15 09:17:36 emperor exim4[723]: Starting MTA: exim4.
Apr 15 09:17:38 emperor gnome-session[703]: Entering running state
Apr 15 09:17:38 emperor gnome-session[703]: openConnection: connect: Aucun
fichier ou dossier de ce type
Apr 15 09:17:38 emperor gnome-session[703]: cannot connect to brltty at :0
Apr 15 09:17:38 emperor dbus[537]: [system] Activating via systemd: service
name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Apr 15 09:17:38 emperor dbus[537]: [system] Successfully activated service
'org.freedesktop.RealtimeKit1'
Apr 15 09:17:38 emperor rtkit-daemon[1112]: Successfully called chroot.
Apr 15 09:17:38 emperor rtkit-daemon[1112]: Successfully dropped privileges.
Apr 15 09:17:38 emperor rtkit-daemon[1112]: Successfully limited resources.
Apr 15 09:17:38 emperor rtkit-daemon[1112]: Running.
Apr 15 09:17:38 emperor rtkit-daemon[1112]: Watchdog thread running.
Apr 15 09:17:38 emperor rtkit-daemon[1112]: Canary thread running.
Apr 15 09:17:38 emperor rtkit-daemon[1112]: Successfully made thread 1111 of
process 1111 (/usr/bin/pulseaudio) owned by '118' high priority at nice level
-11.
Apr 15 09:17:38 emperor rtkit-daemon[1112]: Supervising 1 threads of 1
processes of 1 users.
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID vendor "ACR",
prod id 44304
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using EDID range info
for horizontal sync
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using EDID range info
for vertical refresh
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Printing DDC gathered
Modelines:
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(64.0 kHz eP)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
kHz e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2
kHz e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz
e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz
e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz
e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz
e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz
e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(80.0 kHz e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(60.0 kHz e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(56.5 kHz e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(48.4 kHz e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7
kHz e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
kHz e)
Apr 15 09:17:39 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
kHz e)
Apr 15 09:17:39 emperor rtkit-daemon[1112]: Supervising 1 threads of 1
processes of 1 users.
Apr 15 09:17:39 emperor rtkit-daemon[1112]: Successfully made thread 1117 of
process 1111 (/usr/bin/pulseaudio) owned by '118' RT at priority 5.
Apr 15 09:17:39 emperor rtkit-daemon[1112]: Supervising 2 threads of 1
processes of 1 users.
Apr 15 09:17:39 emperor kernel: [ 28.396015] usb 1-4: reset high-speed USB
device number 3 using ehci-pci
Apr 15 09:17:40 emperor rtkit-daemon[1112]: Supervising 2 threads of 1
processes of 1 users.
Apr 15 09:17:40 emperor rtkit-daemon[1112]: Successfully made thread 1123 of
process 1111 (/usr/bin/pulseaudio) owned by '118' RT at priority 5.
Apr 15 09:17:40 emperor rtkit-daemon[1112]: Supervising 3 threads of 1
processes of 1 users.
Apr 15 09:17:40 emperor rtkit-daemon[1112]: Supervising 3 threads of 1
processes of 1 users.
Apr 15 09:17:40 emperor rtkit-daemon[1112]: Successfully made thread 1124 of
process 1111 (/usr/bin/pulseaudio) owned by '118' RT at priority 5.
Apr 15 09:17:40 emperor rtkit-daemon[1112]: Supervising 4 threads of 1
processes of 1 users.
Apr 15 09:17:40 emperor rtkit-daemon[1112]: Supervising 4 threads of 1
processes of 1 users.
Apr 15 09:17:40 emperor rtkit-daemon[1112]: Successfully made thread 1125 of
process 1111 (/usr/bin/pulseaudio) owned by '118' RT at priority 5.
Apr 15 09:17:40 emperor rtkit-daemon[1112]: Supervising 5 threads of 1
processes of 1 users.
Apr 15 09:17:40 emperor rtkit-daemon[1112]: Successfully made thread 1130 of
process 1130 (/usr/bin/pulseaudio) owned by '118' high priority at nice level
-11.
Apr 15 09:17:40 emperor rtkit-daemon[1112]: Supervising 6 threads of 2
processes of 1 users.
Apr 15 09:17:40 emperor pulseaudio[1130]: [pulseaudio] pid.c: Daemon already
running.
Apr 15 09:17:40 emperor dbus[537]: [system] Activating via systemd: service
name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service'
Apr 15 09:17:40 emperor dbus[537]: [system] Successfully activated service
'org.freedesktop.locale1'
Apr 15 09:17:40 emperor colord: Profile added: icc-
a2283f56de29767273f080bc460baf71
Apr 15 09:17:40 emperor colord: Profile added: icc-
62a9ab5b3d7ce35571ab65894c17e172
Apr 15 09:17:40 emperor systemd[700]: Time has been changed
Apr 15 09:17:42 emperor gnome-session[703]: Gjs-Message: JS LOG: Failed to
launch ibus-daemon: L'exécution du processus fils « ibus-daemon » a
échoué (Aucun fichier ou dossier de ce type)
Apr 15 09:17:42 emperor gdm-Xorg-:0[612]: The XKEYBOARD keymap compiler
(xkbcomp) reports:
Apr 15 09:17:42 emperor gdm-Xorg-:0[612]: > Warning: Type "ONE_LEVEL"
has 1 levels, but <RALT> has 2 symbols
Apr 15 09:17:42 emperor gdm-Xorg-:0[612]: > Ignoring extra
symbols
Apr 15 09:17:42 emperor gdm-Xorg-:0[612]: > Warning: Type "ONE_LEVEL"
has 1 levels, but <RALT> has 2 symbols
Apr 15 09:17:42 emperor gdm-Xorg-:0[612]: > Ignoring extra
symbols
Apr 15 09:17:42 emperor gdm-Xorg-:0[612]: Errors from xkbcomp are not fatal to
the X server
Apr 15 09:17:43 emperor dbus[537]: [system] Activating via systemd: service
name='org.freedesktop.GeoClue2' unit='geoclue.service'
Apr 15 09:17:43 emperor dbus[537]: [system] Activating via systemd: service
name='fi.w1.wpa_supplicant1' unit='wpa_supplicant.service'
Apr 15 09:17:43 emperor dbus[537]: [system] Activating via systemd: service
name='org.freedesktop.PackageKit' unit='packagekit.service'
Apr 15 09:17:43 emperor PackageKit: daemon start
Apr 15 09:17:43 emperor dbus[537]: [system] Successfully activated service
'fi.w1.wpa_supplicant1'
Apr 15 09:17:43 emperor NetworkManager[529]: <info> wpa_supplicant started
Apr 15 09:17:43 emperor wpa_supplicant[1149]: Successfully initialized
wpa_supplicant
Apr 15 09:17:43 emperor dbus[537]: [system] Successfully activated service
'org.freedesktop.GeoClue2'
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID vendor "ACR",
prod id 44304
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using hsync ranges
from config file
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using vrefresh ranges
from config file
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Printing DDC gathered
Modelines:
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(64.0 kHz eP)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
kHz e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2
kHz e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz
e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz
e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz
e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz
e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz
e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(80.0 kHz e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(60.0 kHz e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(56.5 kHz e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(48.4 kHz e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7
kHz e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
kHz e)
Apr 15 09:17:43 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
kHz e)
Apr 15 09:17:43 emperor dbus[537]: [system] Successfully activated service
'org.freedesktop.PackageKit'
Apr 15 09:17:44 emperor colord: Automatic metadata add icc-
62a9ab5b3d7ce35571ab65894c17e172 to xrandr-Acer Technologies-Acer
AL1911-ETL2302119
Apr 15 09:17:44 emperor colord: Device added: xrandr-Acer Technologies-Acer
AL1911-ETL2302119
Apr 15 09:17:45 emperor gnome-session[703]: Gjs-Message: JS LOG: GNOME Shell
started at Fri Apr 15 2016 09:17:43 GMT+0200 (CEST)
Apr 15 09:18:21 emperor systemd[1174]: Starting Paths.
Apr 15 09:18:21 emperor systemd[1174]: Reached target Paths.
Apr 15 09:18:21 emperor systemd[1174]: Starting Timers.
Apr 15 09:18:21 emperor systemd[1174]: Reached target Timers.
Apr 15 09:18:21 emperor systemd[1174]: Starting Sockets.
Apr 15 09:18:21 emperor systemd[1174]: Reached target Sockets.
Apr 15 09:18:21 emperor systemd[1174]: Starting Basic System.
Apr 15 09:18:21 emperor systemd[1174]: Reached target Basic System.
Apr 15 09:18:21 emperor systemd[1174]: Starting Default.
Apr 15 09:18:21 emperor systemd[1174]: Reached target Default.
Apr 15 09:18:21 emperor systemd[1174]: Startup finished in 27ms.
Apr 15 09:18:21 emperor org.a11y.atspi.Registry[714]:
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying
GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Apr 15 09:18:21 emperor gnome-session[703]: g_dbus_connection_real_closed:
Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an
async read (g-io-error-quark, 0). Exiting.
Apr 15 09:18:21 emperor org.a11y.Bus[707]: g_dbus_connection_real_closed:
Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an
async read (g-io-error-quark, 0). Exiting.
Apr 15 09:18:21 emperor gnome-session[703]: ** (gnome-settings-daemon:822):
WARNING **: Name taken or bus went away - shutting down
Apr 15 09:18:21 emperor gnome-session[703]: g_dbus_connection_real_closed:
Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an
async read (g-io-error-quark, 0). Exiting.
Apr 15 09:18:21 emperor ca.desrt.dconf[707]: g_dbus_connection_real_closed:
Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an
async read (g-io-error-quark, 0). Exiting.
Apr 15 09:18:21 emperor colord: Profile removed: icc-
a2283f56de29767273f080bc460baf71
Apr 15 09:18:21 emperor colord: Automatic remove of icc-
62a9ab5b3d7ce35571ab65894c17e172 from xrandr-Acer Technologies-Acer
AL1911-ETL2302119
Apr 15 09:18:21 emperor colord: Profile removed: icc-
62a9ab5b3d7ce35571ab65894c17e172
Apr 15 09:18:21 emperor colord: device removed: xrandr-Acer Technologies-Acer
AL1911-ETL2302119
Apr 15 09:18:21 emperor /etc/gdm3/Xsession[1184]: /etc/gdm3/Xsession: Beginning
session setup...
Apr 15 09:18:22 emperor /etc/gdm3/Xsession[1184]: localuser:alain09a being
added to access control list
Apr 15 09:18:22 emperor /etc/gdm3/Xsession[1184]: openConnection: connect:
Aucun fichier ou dossier de ce type
Apr 15 09:18:22 emperor /etc/gdm3/Xsession[1184]: cannot connect to brltty at
:0
Apr 15 09:18:22 emperor /etc/gdm3/Xsession[1184]: ** Message: main.vala:99:
Session is LXDE
Apr 15 09:18:22 emperor /etc/gdm3/Xsession[1184]: ** Message: main.vala:100: DE
is LXDE
Apr 15 09:18:23 emperor /etc/gdm3/Xsession[1184]: ** Message: main.vala:131:
log directory: /home/alain09a/.cache/lxsession/LXDE
Apr 15 09:18:23 emperor /etc/gdm3/Xsession[1184]: ** Message: main.vala:132:
log path: /home/alain09a/.cache/lxsession/LXDE/run.log
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID vendor "ACR",
prod id 44304
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using hsync ranges
from config file
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using vrefresh ranges
from config file
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Printing DDC gathered
Modelines:
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(64.0 kHz eP)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2
kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz
e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz
e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz
e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz
e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz
e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(80.0 kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(60.0 kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(56.5 kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(48.4 kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7
kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID vendor "ACR",
prod id 44304
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using hsync ranges
from config file
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using vrefresh ranges
from config file
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Printing DDC gathered
Modelines:
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(64.0 kHz eP)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2
kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz
e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz
e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz
e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz
e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz
e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(80.0 kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(60.0 kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(56.5 kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(48.4 kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7
kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
kHz e)
Apr 15 09:18:26 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
kHz e)
Apr 15 09:18:27 emperor dbus[537]: [system] Activating via systemd: service
name='org.freedesktop.UDisks2' unit='udisks2.service'
Apr 15 09:18:27 emperor udisksd[1333]: udisks daemon version 2.1.3 starting
Apr 15 09:18:27 emperor dbus[537]: [system] Successfully activated service
'org.freedesktop.UDisks2'
Apr 15 09:18:27 emperor udisksd[1333]: Acquired the name
org.freedesktop.UDisks2 on the system message bus
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): EDID vendor "ACR",
prod id 44304
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using hsync ranges
from config file
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Using vrefresh ranges
from config file
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Printing DDC gathered
Modelines:
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(64.0 kHz eP)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
kHz e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2
kHz e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz
e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz
e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz
e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz
e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz
e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(80.0 kHz e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(60.0 kHz e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(56.5 kHz e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(48.4 kHz e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7
kHz e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
kHz e)
Apr 15 09:18:27 emperor gdm-Xorg-:0[612]: (II) RADEON(0): Modeline
"800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
kHz e)
Apr 15 09:18:27 emperor rtkit-daemon[1112]: Successfully made thread 1379 of
process 1379 (/usr/bin/pulseaudio) owned by '1001' high priority at nice level
-11.
Apr 15 09:18:27 emperor rtkit-daemon[1112]: Supervising 6 threads of 2
processes of 2 users.
Apr 15 09:18:28 emperor org.gnome.zeitgeist.Engine[1225]: ** (zeitgeist-
datahub:1390): WARNING **: zeitgeist-datahub.vala:226: Unable to get name
"org.gnome.zeitgeist.datahub" on the bus!
Apr 15 09:18:28 emperor rtkit-daemon[1112]: Supervising 6 threads of 2
processes of 2 users.
Apr 15 09:18:28 emperor rtkit-daemon[1112]: Successfully made thread 1404 of
process 1379 (/usr/bin/pulseaudio) owned by '1001' RT at priority 5.
Apr 15 09:18:28 emperor rtkit-daemon[1112]: Supervising 7 threads of 2
processes of 2 users.
Apr 15 09:18:28 emperor org.a11y.Bus[1225]: Activating service
name='org.a11y.atspi.Registry'
Apr 15 09:18:28 emperor org.a11y.Bus[1225]: Successfully activated service
'org.a11y.atspi.Registry'
Apr 15 09:18:28 emperor org.a11y.atspi.Registry[1411]: SpiRegistry daemon is
running with well-known name - org.a11y.atspi.Registry
Apr 15 09:18:28 emperor rtkit-daemon[1112]: Supervising 7 threads of 2
processes of 2 users.
Apr 15 09:18:28 emperor rtkit-daemon[1112]: Successfully made thread 1419 of
process 1379 (/usr/bin/pulseaudio) owned by '1001' RT at priority 5.
Apr 15 09:18:28 emperor rtkit-daemon[1112]: Supervising 8 threads of 2
processes of 2 users.
Apr 15 09:18:28 emperor pulseaudio[1379]: ALSA nous a réveillé pour lire de
nouvelles données à partir du périphérique, mais il n'y avait en fait rien
à lire !
Apr 15 09:18:28 emperor pulseaudio[1379]: Il s'agit très probablement d'un
bogue dans le pilote ALSA « snd_usb_audio ». Veuillez rapporter ce
problème aux développeurs d'ALSA.
Apr 15 09:18:28 emperor pulseaudio[1379]: Nous avons été réveillés avec
POLLIN actif, cependant un snd_pcm_avail() ultérieur a retourné 0 ou une
autre valeur < min_avail.
Apr 15 09:18:29 emperor rtkit-daemon[1112]: Supervising 8 threads of 2
processes of 2 users.
Apr 15 09:18:29 emperor rtkit-daemon[1112]: Successfully made thread 1420 of
process 1379 (/usr/bin/pulseaudio) owned by '1001' RT at priority 5.
Apr 15 09:18:29 emperor rtkit-daemon[1112]: Supervising 9 threads of 2
processes of 2 users.
Apr 15 09:18:29 emperor rtkit-daemon[1112]: Supervising 9 threads of 2
processes of 2 users.
Apr 15 09:18:29 emperor rtkit-daemon[1112]: Successfully made thread 1421 of
process 1379 (/usr/bin/pulseaudio) owned by '1001' RT at priority 5.
Apr 15 09:18:29 emperor rtkit-daemon[1112]: Supervising 10 threads of 2
processes of 2 users.
Apr 15 09:18:30 emperor org.gnome.OnlineAccounts[1225]: goa-daemon-Message:
goa-daemon version 3.14.2 starting
Apr 15 09:18:31 emperor org.gtk.Private.AfcVolumeMonitor[1225]: Volume monitor
alive
Apr 15 09:18:36 emperor dbus[537]: [system] Activating service
name='org.opensuse.CupsPkHelper.Mechanism' (using servicehelper)
Apr 15 09:18:36 emperor dbus[537]: [system] Successfully activated service
'org.opensuse.CupsPkHelper.Mechanism'
Apr 15 09:18:43 emperor systemd[700]: Stopping Default.
Apr 15 09:18:43 emperor systemd[700]: Stopped target Default.
Apr 15 09:18:43 emperor systemd[700]: Stopping Basic System.
Apr 15 09:18:43 emperor systemd[700]: Stopped target Basic System.
Apr 15 09:18:43 emperor systemd[700]: Stopping Paths.
Apr 15 09:18:43 emperor systemd[700]: Stopped target Paths.
Apr 15 09:18:43 emperor systemd[700]: Stopping Timers.
Apr 15 09:18:43 emperor systemd[700]: Stopped target Timers.
Apr 15 09:18:43 emperor systemd[700]: Stopping Sockets.
Apr 15 09:18:43 emperor systemd[700]: Stopped target Sockets.
Apr 15 09:18:43 emperor systemd[700]: Starting Shutdown.
Apr 15 09:18:43 emperor systemd[700]: Reached target Shutdown.
Apr 15 09:18:43 emperor systemd[700]: Starting Exit the Session...
Apr 15 09:18:43 emperor systemd[700]: Received SIGRTMIN+24 from PID 1595
(kill).
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: 8.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages pulseaudio depends on:
ii adduser 3.113+nmu3
ii libasound2 1.0.28-1
ii libasound2-plugins 1.0.28-1+b1
ii libc6 2.19-18+deb8u4
ii libcap2 1:2.24-8
ii libdbus-1-3 1.8.20-0+deb8u1
ii libfftw3-single3 3.3.4-2
ii libgcc1 1:4.9.2-10
ii libice6 2:1.0.9-1+b1
ii libltdl7 2.4.2-1.11
ii liborc-0.4-0 1:0.4.22-1
ii libpulse0 5.0-13
ii libsamplerate0 0.1.8-8
ii libsm6 2:1.2.2-1+b1
ii libsndfile1 1.0.25-9.1+deb8u1
ii libspeexdsp1 1.2~rc1.2-1
ii libstdc++6 4.9.2-10
ii libsystemd0 215-17+deb8u4
ii libtdb1 1.3.6-0+deb8u1
ii libudev1 215-17+deb8u4
ii libwebrtc-audio-processing-0 0.1-3
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.6.2-3
ii libxcb1 1.10-3+b1
ii libxtst6 2:1.2.2-1+b1
ii lsb-base 4.1+Debian13+nmu1
ii pulseaudio-utils 5.0-13
ii udev 215-17+deb8u4
Versions of packages pulseaudio recommends:
ii pulseaudio-module-x11 5.0-13
ii rtkit 0.11-2
Versions of packages pulseaudio suggests:
pn paman <none>
pn paprefs <none>
ii pavucontrol 2.0-3
pn pavumeter <none>
-- no debconf information
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
# resample-method defaults to speex-float-1 on most architectures,
# speex-fixed-1 on ARM
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
..nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
..fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
..endif
### Automatically connect sink and source if JACK server is present
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect channels=2
..fail
..endif
### Automatically load driver modules for Bluetooth hardware
..ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
..endif
..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
..ifexists module-console-kit.so
load-module module-console-kit
..endif
..ifexists module-systemd-login.so
load-module module-systemd-login
..endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
-------------- next part --------------
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
sysdefault:CARD=Intel
HDA Intel, ALC883 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
Front speakers
surround21:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC883 Digital
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
Direct sample mixing device
dmix:CARD=Intel,DEV=1
HDA Intel, ALC883 Digital
Direct sample mixing device
dsnoop:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
Direct sample snooping device
dsnoop:CARD=Intel,DEV=1
HDA Intel, ALC883 Digital
Direct sample snooping device
hw:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
Direct hardware device without any conversions
hw:CARD=Intel,DEV=1
HDA Intel, ALC883 Digital
Direct hardware device without any conversions
plughw:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
Hardware device with all software conversions
plughw:CARD=Intel,DEV=1
HDA Intel, ALC883 Digital
Hardware device with all software conversions
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
dmix:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct sample snooping device
hw:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Hardware device with all software conversions
-------------- next part --------------
Card #0
Name: alsa_card.pci-0000_01_00.1
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfe9fc000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aa60"
device.product.name = "Redwood HDMI Audio [Radeon HD 5000 Series]"
device.string = "1"
device.description = "Redwood HDMI Audio [Radeon HD 5000 Series]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5400, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 300, available: yes)
off: Éteint (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:hdmi-stereo
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround
Card #1
Name: alsa_card.usb-046d_0990_5997F515-02-Q9000
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "2"
alsa.card_name = "QuickCam Pro 9000"
alsa.long_card_name = "Logitech, Inc. QuickCam Pro 9000 at usb-0000:00:1a.7-4, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1a.7-usb-0:4:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.2/sound/card2"
udev.id = "usb-046d_0990_5997F515-02-Q9000"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0990"
device.product.name = "QuickCam Pro 9000"
device.serial = "046d_0990_5997F515"
device.form_factor = "webcam"
device.string = "2"
device.description = "QuickCam Pro 9000"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
Profiles:
input:analog-mono: Mono analogique Input (sinks: 0, sources: 1, priority: 1, available: yes)
off: Éteint (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: input:analog-mono
Ports:
analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-mono
Card #2
Name: alsa_card.pci-0000_00_1b.0
Driver: module-alsa-card.c
Owner Module: 8
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfe8f8000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "293e"
device.product.name = "82801I (ICH9 Family) HD Audio Controller (P5K PRO Motherboard)"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio interne"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Stéréo analogique Input (sinks: 0, sources: 1, priority: 60, available: yes)
output:analog-stereo: Stéréo analogique Output (sinks: 1, sources: 0, priority: 6000, available: yes)
output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (sinks: 1, sources: 1, priority: 6060, available: yes)
output:analog-surround-40: Surround analogique 4.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-40+input:analog-stereo: Surround analogique 4.0 Output + Stéréo analogique Input (sinks: 1, sources: 1, priority: 760, available: yes)
output:analog-surround-41: Surround analogique 4.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-41+input:analog-stereo: Surround analogique 4.1 Output + Stéréo analogique Input (sinks: 1, sources: 1, priority: 860, available: yes)
output:analog-surround-50: Surround analogique 5.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-50+input:analog-stereo: Surround analogique 5.0 Output + Stéréo analogique Input (sinks: 1, sources: 1, priority: 760, available: yes)
output:analog-surround-51: Surround analogique 5.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-51+input:analog-stereo: Surround analogique 5.1 Output + Stéréo analogique Input (sinks: 1, sources: 1, priority: 860, available: yes)
output:analog-surround-71: Analog Surround 7.1 Output (sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Stéréo analogique Input (sinks: 1, sources: 1, priority: 760, available: yes)
output:iec958-stereo: Stéréo numérique (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:iec958-stereo+input:analog-stereo: Stéréo numérique (IEC958) Output + Stéréo analogique Input (sinks: 1, sources: 1, priority: 5560, available: yes)
off: Éteint (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-front-mic: Front Microphone (priority: 8500, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-input-rear-mic: Rear Microphone (priority: 8200, latency offset: 0 usec, available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-input-linein: Entrée-ligne (priority: 8100, latency offset: 0 usec, not available)
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-output-lineout: Line Out (priority: 9900, latency offset: 0 usec, available)
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo, output:analog-surround-71, output:analog-surround-71+input:analog-stereo
analog-output-headphones: Casques analogiques (priority: 9000, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec)
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo
-------------- next part --------------
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_01_00.1.hdmi-stereo
Description: Redwood HDMI Audio [Radeon HD 5000 Series] Digital Stereo (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfe9fc000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aa60"
device.product.name = "Redwood HDMI Audio [Radeon HD 5000 Series]"
device.string = "hdmi:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "Redwood HDMI Audio [Radeon HD 5000 Series] Digital Stereo (HDMI)"
alsa.mixer_name = "ATI R6xx HDMI"
alsa.components = "HDA:1002aa01,00aa0100,00100200"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, not available)
Active Port: hdmi-output-0
Formats:
pcm
Sink #1
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo
Description: Audio interne Stéréo analogique
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 68813 / 105% / 1.27 dB, front-right: 68813 / 105% / 1.27 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC883 Analog"
alsa.id = "ALC883 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfe8f8000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "293e"
device.product.name = "82801I (ICH9 Family) HD Audio Controller (P5K PRO Motherboard)"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Stéréo analogique"
device.description = "Audio interne Stéréo analogique"
alsa.mixer_name = "Realtek ALC883"
alsa.components = "HDA:10ec0883,1043829f,00100002"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-lineout: Line Out (priority: 9900, available)
analog-output-headphones: Casques analogiques (priority: 9000, not available)
Active Port: analog-output-lineout
Formats:
pcm
-------------- next part --------------
Source #0
State: SUSPENDED
Name: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
Description: Monitor of Redwood HDMI Audio [Radeon HD 5000 Series] Digital Stereo (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_01_00.1.hdmi-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Redwood HDMI Audio [Radeon HD 5000 Series] Digital Stereo (HDMI)"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfe9fc000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aa60"
device.product.name = "Redwood HDMI Audio [Radeon HD 5000 Series]"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.usb-046d_0990_5997F515-02-Q9000.analog-mono
Description: QuickCam Pro 9000 Mono analogique
Driver: module-alsa-card.c
Sample Specification: s16le 1ch 16000Hz
Channel Map: mono
Owner Module: 7
Mute: no
Volume: mono: 28218 / 43% / -21.96 dB
balance 0.00
Base Volume: 20724 / 32% / -30.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "QuickCam Pro 9000"
alsa.long_card_name = "Logitech, Inc. QuickCam Pro 9000 at usb-0000:00:1a.7-4, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1a.7-usb-0:4:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.2/sound/card2"
udev.id = "usb-046d_0990_5997F515-02-Q9000"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0990"
device.product.name = "QuickCam Pro 9000"
device.serial = "046d_0990_5997F515"
device.form_factor = "webcam"
device.string = "hw:2"
device.buffering.buffer_size = "3198"
device.buffering.fragment_size = "798"
device.access_mode = "mmap"
device.profile.name = "analog-mono"
device.profile.description = "Mono analogique"
device.description = "QuickCam Pro 9000 Mono analogique"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB046d:0990"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
Ports:
analog-input-mic: Microphone (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Source #2
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Audio interne Stéréo analogique
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Audio interne Stéréo analogique"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfe8f8000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "293e"
device.product.name = "82801I (ICH9 Family) HD Audio Controller (P5K PRO Motherboard)"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #3
State: SUSPENDED
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Audio interne Stéréo analogique
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 16384 / 25% / -36.12 dB, front-right: 16384 / 25% / -36.12 dB
balance 0.00
Base Volume: 5514 / 8% / -64.50 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC883 Analog"
alsa.id = "ALC883 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfe8f8000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "293e"
device.product.name = "82801I (ICH9 Family) HD Audio Controller (P5K PRO Motherboard)"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Stéréo analogique"
device.description = "Audio interne Stéréo analogique"
alsa.mixer_name = "Realtek ALC883"
alsa.components = "HDA:10ec0883,1043829f,00100002"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-front-mic: Front Microphone (priority: 8500, not available)
analog-input-rear-mic: Rear Microphone (priority: 8200, available)
analog-input-linein: Entrée-ligne (priority: 8100, not available)
Active Port: analog-input-rear-mic
Formats:
pcm
-------------- next part --------------
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "5.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "5.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "5.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "5.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "5.0"
Module #6
Name: module-alsa-card
Argument: device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "5.0"
Module #7
Name: module-alsa-card
Argument: device_id="2" name="usb-046d_0990_5997F515-02-Q9000" card_name="alsa_card.usb-046d_0990_5997F515-02-Q9000" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "5.0"
Module #8
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "5.0"
Module #9
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "5.0"
Module #10
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "5.0"
Module #11
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "5.0"
Module #12
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Garde toujours au moins une destination même si elle est vide"
module.version = "5.0"
Module #13
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "5.0"
Module #14
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "5.0"
Module #15
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "5.0"
Module #16
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "5.0"
Module #17
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "5.0"
Module #18
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "5.0"
Module #19
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "5.0"
Module #20
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "5.0"
Module #21
Name: module-x11-publish
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "5.0"
Module #22
Name: module-x11-cork-request
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when cork/uncork is requested"
module.version = "5.0"
-------------- next part --------------
Server String: unix:/run/user/1001/pulse/native
Library Protocol Version: 29
Server Protocol Version: 29
Is Local: yes
Client Index: 11
Tile Size: 65472
User Name: alain09a
Host Name: emperor
Server Name: pulseaudio
Server Version: 5.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Default Source: alsa_input.pci-0000_00_1b.0.analog-stereo
Cookie: 8ff3:d7c7
More information about the pkg-pulseaudio-devel
mailing list