[Pkg-utopia-maintainers] Bug#699292: Bug#699292: network-manager: not connecting with Xircom RealPort2 CardBus Ethernet 10/100 (R2BE-100)

[Andreas Stempfhuber]

Hi Michael,

Am Dienstag, 29. Januar 2013 schrieb Michael Biebl:
> On 29.01.2013 23:24, Andreas Stempfhuber wrote:
> > I have newly installed Wheezy and the network manager is not able to
> > connect to the network using the following Cardbus PCMCIA ethernet card:
> > 
> > 06:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
> > 
> >         Subsystem: Xircom RealPort2 CardBus Ethernet 10/100 (R2BE-100)
> >         Flags: bus master, medium devsel, latency 64, IRQ 9
> >         I/O ports at 2000 [size=128]
> >         Memory at 18000000 (32-bit, non-prefetchable) [size=2K]
> >         Memory at 18000800 (32-bit, non-prefetchable) [size=2K]
> >         [virtual] Expansion ROM at 1c000000 [disabled] [size=16K]
> >         Capabilities: [dc] Power Management version 2
> >         Kernel driver in use: xircom_cb
> > 
> > The interface worked during the installation and bringing the interface
> > up manually using
> 
> What's the content of /etc/network/interfaces?
> Devices listed in there will not be managed by NM (to avoid stomping
> over a ifupdown configure interface).

it's a brand new Wheezy installation (I actually tried two brand new 
installations to exclude issues with the Notebook hardware) and 
/etc/network/interfaces is at default, only localhost is there.

What looks a bit strange to me is "GENERAL.STATE: 20 (unavailable)" as this is 
not shown up with working cards.

Thanks,

Andi