[Pkg-xen-devel] Bug#776237: xen-hypervisor-4.4-amd64: kernel panic on dom0 boot
Brian Paterni
bpaterni at gmail.com
Sun Jan 25 20:24:16 UTC 2015
Package: xen-hypervisor-4.4-amd64
Version: 4.4.1-6
Severity: normal
Dear Maintainer,
I'm trying to boot into xen/dom0 but so far all attempts have resulted
in a crash followed by an automatic reboot.
My hardware is
Motherboard: Asus Sabertooth 990FX R2.0
CPU: AMD FX-8350
GPU: Sapphire Radeon R9 285
A trace of the kernel panic follows (full log captured over serial should
be attached):
[ 4.351782] general protection fault: 0000 [#1] SMP
[ 4.351878] Modules linked in: ohci_pci(+) crct10dif_pclmul crct10dif_common crc32c_intel ohci_hcd ehci_pci ehci_hcd xhci_hcd ahci libahci r8169 mii libata usbcore usb_common scsi_mod
[ 4.352221] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-4-amd64 #1 Debian 3.16.7-ckt4-1
[ 4.352365] Hardware name: To be filled by O.E.M. To be filled by O.E.M./SABERTOOTH 990FX R2.0, BIOS 2501 04/08/2014
[ 4.352545] task: ffffffff8181a460 ti: ffffffff81800000 task.ti: ffffffff81800000
[ 4.352673] RIP: e030:[<ffffffff812b662d>] [<ffffffff812b662d>] memcpy+0xd/0x110
[ 4.352806] RSP: e02b:ffff880447003e80 EFLAGS: 00010246
[ 4.352898] RAX: ffff72000d96bc18 RBX: 00000000ff79ab83 RCX: 0000000000000008
[ 4.353019] RDX: 0000000000000000 RSI: ffff8800001c1800 RDI: ffff72000d96bc18
[ 4.353141] RBP: 001fffffff79ab83 R08: 0000000000000000 R09: ffffffff81360600
[ 4.353263] R10: ffff8804473d6000 R11: ffff88042c01e118 R12: 0000000000000001
[ 4.353414] R13: 0000000000000000 R14: 0000000000000006 R15: 0000000000000000
[ 4.353539] FS: 00007f66bff44880(0000) GS:ffff880447000000(0000) knlGS:0000000000000000
[ 4.353677] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 4.353775] CR2: 00007f66bff43000 CR3: 000000042cfbf000 CR4: 0000000000040660
[ 4.353897] Stack:
[ 4.353934] ffffffff812cdd5d ffff88042cd59a00 ffff88042c4a3800 0000000000000000
[ 4.354068] ffffffffa0098e36 ffff88042cd59a00 ffff88042c4a3800 0000000000000000
[ 4.354202] 0000000000000000 ffffffffa0098f9b ffff880447003ef8 ffff88042c4a39d4
[ 4.354336] Call Trace:
[ 4.354380] <IRQ>
[ 4.354415] [<ffffffff812cdd5d>] ? swiotlb_tbl_unmap_single+0x10d/0x120
[ 4.354543] [<ffffffffa0098e36>] ? usb_hcd_unmap_urb_for_dma+0x96/0x190 [usbcore]
[ 4.354676] [<ffffffffa0098f9b>] ? __usb_hcd_giveback_urb+0x3b/0x100 [usbcore]
[ 4.354835] [<ffffffffa0099bae>] ? usb_giveback_urb_bh+0x8e/0xd0 [usbcore]
[ 4.354956] [<ffffffff8106c1a4>] ? tasklet_action+0xf4/0x100
[ 4.355056] [<ffffffff8106c591>] ? __do_softirq+0xf1/0x290
[ 4.355153] [<ffffffff8106c965>] ? irq_exit+0x95/0xa0
[ 4.355244] [<ffffffff813579b5>] ? xen_evtchn_do_upcall+0x35/0x50
[ 4.355352] [<ffffffff815113de>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 4.355467] <EOI>
[ 4.355501] [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
[ 4.355619] [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
[ 4.355728] [<ffffffff81009e0c>] ? xen_safe_halt+0xc/0x20
[ 4.355824] [<ffffffff8101c949>] ? default_idle+0x19/0xb0
[ 4.355920] [<ffffffff810a7dc0>] ? cpu_startup_entry+0x340/0x400
[ 4.356026] [<ffffffff81902071>] ? start_kernel+0x492/0x49d
[ 4.356155] [<ffffffff81901a04>] ? set_init_arg+0x4e/0x4e
[ 4.356250] [<ffffffff81903f64>] ? xen_start_kernel+0x569/0x573
[ 4.356354] Code: 66 0f 1f 44 00 00 e8 03 fc ff ff 48 8b 43 58 48 2b 43 50 88 43 4e eb e6 90 90 90 90 90 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b 4e 08 4c 8b 56 10 4c
[ 4.356803] RIP [<ffffffff812b662d>] memcpy+0xd/0x110
[ 4.356895] RSP <ffff880447003e80>
[ 4.356957] ---[ end trace f46bbc82c10d88b2 ]---
[ 4.357038] Kernel panic - not syncing: Fatal exception in interrupt
[ 4.357172] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)
(XEN) Domain 0 crashed: rebooting machine in 5 seconds.
(XEN) Resetting with ACPI MEMORY or I/O RESET_REG.
-- System Information:
Debian Release: 8.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
xen-hypervisor-4.4-amd64 depends on no packages.
Versions of packages xen-hypervisor-4.4-amd64 recommends:
ii xen-utils-4.4 4.4.1-6
xen-hypervisor-4.4-amd64 suggests no packages.
-- no debconf information
-------------- next part --------------
(XEN) Xen version 4.4.1 (Debian 4.4.1-6) (waldi at debian.org) (gcc (Debian 4.9.2-5) 4.9.2) debug=n Thu Dec 11 14:57:34 UTC 2014
(XEN) Bootloader: GRUB 2.02~beta2-20
(XEN) Command line: placeholder loglvl=all guest_loglvl=all com1=115200 console=com1,vga no-real-mode edd=off
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 0 EDD information structures
(XEN) Multiboot-e820 RAM map:
(XEN) 0000000000000000 - 00000000000a0000 (usable)
(XEN) 0000000000100000 - 000000009a763000 (usable)
(XEN) 000000009a763000 - 000000009ab97000 (reserved)
(XEN) 000000009ab97000 - 000000009aba7000 (ACPI data)
(XEN) 000000009aba7000 - 000000009b9af000 (ACPI NVS)
(XEN) 000000009b9af000 - 000000009c9de000 (reserved)
(XEN) 000000009c9de000 - 000000009ca34000 type 20
(XEN) 000000009ca34000 - 000000009ca35000 (usable)
(XEN) 000000009ca35000 - 000000009cc3b000 (ACPI NVS)
(XEN) 000000009cc3b000 - 000000009d083000 (usable)
(XEN) 000000009d083000 - 000000009d7f4000 (reserved)
(XEN) 000000009d7f4000 - 000000009d800000 (usable)
(XEN) 00000000f8000000 - 00000000fc000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fec10000 - 00000000fec11000 (reserved)
(XEN) 00000000fec20000 - 00000000fec21000 (reserved)
(XEN) 00000000fed00000 - 00000000fed01000 (reserved)
(XEN) 00000000fed61000 - 00000000fed71000 (reserved)
(XEN) 00000000fed80000 - 00000000fed90000 (reserved)
(XEN) 00000000fef00000 - 0000000100000000 (reserved)
(XEN) 0000000100001000 - 000000045f000000 (usable)
(XEN) ACPI: RSDP 000FD570, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT 9AB9E070, 005C (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FACP 9ABA5110, 010C (r5 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI Warning (tbfadt-0464): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126]
(XEN) ACPI: DSDT 9AB9E168, 6FA8 (r2 ALASKA A M I 0 INTL 20051117)
(XEN) ACPI: FACS 9B9A9F80, 0040
(XEN) ACPI: APIC 9ABA5220, 009E (r3 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FPDT 9ABA52C0, 0044 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: MCFG 9ABA5308, 003C (r1 ALASKA A M I 1072009 MSFT 10013)
(XEN) ACPI: HPET 9ABA5348, 0038 (r1 ALASKA A M I 1072009 AMI 5)
(XEN) ACPI: IVRS 9ABA6AF0, 0100 (r1 AMD RD890S 202031 AMD 0)
(XEN) ACPI: SSDT 9ABA53D8, 1714 (r1 AMD POWERNOW 1 AMD 1)
(XEN) System RAM: 16283MB (16674140kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000045f000000
(XEN) Domain heap initialised
(XEN) DMI 2.7 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: v5 SLEEP INFO: control[0:0], status[0:0]
(XEN) ACPI: SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - 9b9a9f80/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[9b9a9f8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
(XEN) Processor #16 5:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
(XEN) Processor #17 5:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
(XEN) Processor #18 5:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
(XEN) Processor #19 5:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
(XEN) Processor #20 5:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
(XEN) Processor #21 5:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
(XEN) Processor #22 5:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
(XEN) Processor #23 5:2 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x43538210 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 8 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 56 GSI, 1496 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 4013.551 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x3c0 and states: 0x4000000000000007
(XEN) AMD Fam15h machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff
(XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 64 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) SVM: Supported advanced features:
(XEN) - Nested Page Tables (NPT)
(XEN) - Last Branch Record (LBR) Virtualisation
(XEN) - Next-RIP Saved on #VMEXIT
(XEN) - VMCB Clean Bits
(XEN) - DecodeAssists
(XEN) - Pause-Intercept Filter
(XEN) - TSC Rate MSR
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) HVM: PVH mode not supported on this platform
(XEN) microcode: CPU1 collect_cpu_info: patch_id=0x6000822
(XEN) microcode: CPU2 collect_cpu_info: patch_id=0x6000822
(XEN) microcode: CPU3 collect_cpu_info: patch_id=0x6000822
(XEN) microcode: CPU4 collect_cpu_info: patch_id=0x6000822
(XEN) microcode: CPU5 collect_cpu_info: patch_id=0x6000822
(XEN) microcode: CPU6 collect_cpu_info: patch_id=0x6000822
(XEN) Brought up 8 CPUs
(XEN) microcode: CPU7 collect_cpu_info: patch_id=0x6000822
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding to adjust polling frequency
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1f16000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000448000000->0000000450000000 (4042785 pages to be allocated)
(XEN) Init. ramdisk: 000000045e058000->000000045efff894
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81f16000
(XEN) Init. ramdisk: ffffffff81f16000->ffffffff82ebd894
(XEN) Phys-Mach map: ffffffff82ebe000->ffffffff84ddde48
(XEN) Start info: ffffffff84dde000->ffffffff84dde4b4
(XEN) Page tables: ffffffff84ddf000->ffffffff84e0a000
(XEN) Boot stack: ffffffff84e0a000->ffffffff84e0b000
(XEN) TOTAL: ffffffff80000000->ffffffff85000000
(XEN) ENTRY ADDRESS: ffffffff819011f0
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 284kB init memory.
mapping kernel into physical memory
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel at lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-1 (2015-01-16)
[ 0.000000] Command line: placeholder root=/dev/mapper/hafx-root ro console=tty console=hvc0 console=ttyS0,115200n8 earlyprintk=serial,ttyS0,115200,keep
[ 0.000000] Freeing a0-100 pfn range: 96 pages freed
[ 0.000000] Freeing 9a763-9ca34 pfn range: 8913 pages freed
[ 0.000000] Freeing 9ca35-9cc3b pfn range: 518 pages freed
[ 0.000000] Freeing 9d083-9d7f4 pfn range: 1905 pages freed
[ 0.000000] Freeing 9d800-100001 pfn range: 403457 pages freed
[ 0.000000] Released 414889 pages of unused memory
[ 0.000000] Set 130049193 page(s) to 1-1 mapping
[ 0.000000] Populating 3e3fc9-449472 pfn range: 414889 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x000000009a762fff] usable
[ 0.000000] Xen: [mem 0x000000009a763000-0x000000009ab96fff] reserved
[ 0.000000] Xen: [mem 0x000000009ab97000-0x000000009aba6fff] ACPI data
[ 0.000000] Xen: [mem 0x000000009aba7000-0x000000009b9aefff] ACPI NVS
[ 0.000000] Xen: [mem 0x000000009b9af000-0x000000009c9ddfff] reserved
[ 0.000000] Xen: [mem 0x000000009c9de000-0x000000009ca33fff] type 20
[ 0.000000] Xen: [mem 0x000000009ca34000-0x000000009ca34fff] usable
[ 0.000000] Xen: [mem 0x000000009ca35000-0x000000009cc3afff] ACPI NVS
[ 0.000000] Xen: [mem 0x000000009cc3b000-0x000000009d082fff] usable
[ 0.000000] Xen: [mem 0x000000009d083000-0x000000009d7f3fff] reserved
[ 0.000000] Xen: [mem 0x000000009d7f4000-0x000000009d7fffff] usable
[ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100001000-0x000000045effffff] usable
[ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] console [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f000 max_arch_pfn = 0x400000000
[ 0.000000] e820: last_pfn = 0x9d800 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x449200000-0x4493fffff]
[ 0.000000] init_memory_mapping: [mem 0x448000000-0x4491fffff]
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x447ffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9a762fff]
[ 0.000000] init_memory_mapping: [mem 0x9ca34000-0x9ca34fff]
[ 0.000000] init_memory_mapping: [mem 0x9cc3b000-0x9d082fff]
[ 0.000000] init_memory_mapping: [mem 0x9d7f4000-0x9d7fffff]
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x3ffffffff]
[ 0.000000] init_memory_mapping: [mem 0x449400000-0x45effffff]
[ 0.000000] RAMDISK: [mem 0x01f16000-0x02ebdfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FD570 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009AB9E070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009ABA5110 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x000000009AB9E168 006FA8 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009B9A9F80 000040
[ 0.000000] ACPI: APIC 0x000000009ABA5220 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009ABA52C0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009ABA5308 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000009ABA5348 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IVRS 0x000000009ABA6AF0 000100 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x000000009ABA53D8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x45effffff]
[ 0.000000] NODE_DATA [mem 0x44946d000-0x449471fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x45effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x9a762fff]
[ 0.000000] node 0: [mem 0x9ca34000-0x9ca34fff]
[ 0.000000] node 0: [mem 0x9cc3b000-0x9d082fff]
[ 0.000000] node 0: [mem 0x9d7f4000-0x9d7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x45effffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9a763000-0x9ab96fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ab97000-0x9aba6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aba7000-0x9b9aefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b9af000-0x9c9ddfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c9de000-0x9ca33fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ca35000-0x9cc3afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d083000-0x9d7f3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0x9d800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.4.1 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880447000000 s81792 r8192 d20608 u262144
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4111519
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: placeholder root=/dev/mapper/hafx-root ro console=tty console=hvc0 console=ttyS0,115200n8 earlyprintk=serial,ttyS0,115200,keep
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] software IO TLB [mem 0x432c00000-0x436c00000] (64MB) mapped at [ffff880432c00000-ffff880436bfffff]
[ 0.000000] Memory: 15929148K/16674136K available (5201K kernel code, 943K rwdata, 1828K rodata, 1200K init, 840K bss, 744988K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:1288 16
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 4013.548 MHz processor
[ 2.773889] Calibrating delay loop (skipped), value calculated using timer frequency.. 8027.09 BogoMIPS (lpj=16054192)
[ 2.774071] pid_max: default: 32768 minimum: 301
[ 2.774157] ACPI: Core revision 20140424
[ 2.777342] ACPI: All ACPI Tables successfully acquired
[ 3.048850] Security Framework initialized
[ 3.048930] AppArmor: AppArmor disabled by boot time parameter
[ 3.049029] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 3.051205] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 3.055816] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 3.057682] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 3.057833] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 3.058228] Initializing cgroup subsys memory
[ 3.058337] Initializing cgroup subsys devices
[ 3.058419] Initializing cgroup subsys freezer
[ 3.058497] Initializing cgroup subsys net_cls
[ 3.058576] Initializing cgroup subsys blkio
[ 3.058666] Initializing cgroup subsys perf_event
[ 3.058747] Initializing cgroup subsys net_prio
[ 3.058868] CPU: Physical Processor ID: 0
[ 3.058936] CPU: Processor Core ID: 0
[ 3.059000] mce: CPU supports 2 MCE banks
[ 3.059079] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 3.059079] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 3.059079] tlb_flushall_shift: 6
[ 3.059398] Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000)
[ 3.060320] ftrace: allocating 21587 entries in 85 pages
[ 3.066149] Performance Events: Fam15h core perfctr, (XEN) traps.c:2514:d0 Domain attempted WRMSR 00000000c0010201 from 0x0000000000000000 to 0x000000000000ffff.
Broken PMU hardware detected, using software events only.
[ 3.066340] Failed to access perfctr msr (MSR c0010201 is 0)
[ 3.067758] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 3.068006] installing Xen timer for CPU 1
[ 3.068358] installing Xen timer for CPU 2
[ 3.068665] installing Xen timer for CPU 3
[ 3.068946] installing Xen timer for CPU 4
[ 3.069262] installing Xen timer for CPU 5
[ 3.069578] installing Xen timer for CPU 6
[ 3.069895] installing Xen timer for CPU 7
[ 3.070077] x86: Booted up 1 node, 8 CPUs
[ 3.070390] devtmpfs: initialized
[ 3.075381] PM: Registering ACPI NVS region [mem 0x9aba7000-0x9b9aefff] (14712832 bytes)
[ 3.075820] PM: Registering ACPI NVS region [mem 0x9ca35000-0x9cc3afff] (2121728 bytes)
[ 3.076884] pinctrl core: initialized pinctrl subsystem
[ 3.077079] NET: Registered protocol family 16
[ 3.077170] xen:grant_table: Grant tables using version 1 layout
[ 3.077281] Grant table initialized
[ 3.077633] ACPI: bus type PCI registered
[ 3.077735] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.078116] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 3.078275] PCI: not using MMCONFIG
[ 3.078337] PCI: Using configuration type 1 for base access
[ 3.078432] PCI: Using configuration type 1 for extended access
[ 3.090850] ACPI: Added _OSI(Module Device)
[ 3.090928] ACPI: Added _OSI(Processor Device)
[ 3.091006] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 3.091088] ACPI: Added _OSI(Processor Aggregator Device)
[ 3.092850] ACPI: Executed 2 blocks of module-level executable AML code
[ 3.106712] ACPI: Interpreter enabled
[ 3.106783] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 3.106976] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 3.107148] ACPI: (supports S0 S3 S4 S5)
[ 3.107217] ACPI: Using IOAPIC for interrupt routing
[ 3.107475] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 3.107669] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 3.126381] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.228254] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 3.228367] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.228510] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 3.229093] PCI host bridge to bus 0000:00
[ 3.229166] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.229261] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 3.229367] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 3.229474] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 3.229579] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 3.229685] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 3.229802] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 3.229928] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xffffffff]
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:00.2
[ 3.230649] pci 0000:00:02.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:02.0
[ 3.230945] pci 0000:00:04.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:04.0
[ 3.231238] pci 0000:00:05.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:05.0
[ 3.231533] pci 0000:00:09.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:09.0
[ 3.231861] pci 0000:00:0a.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:0a.0
[ 3.232152] pci 0000:00:0b.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:0b.0
[ 3.232445] pci 0000:00:0d.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:0d.0
(XEN) PCI add device 0000:00:11.0
[ 3.233001] pci 0000:00:12.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:12.0
[ 3.233370] pci 0000:00:12.2: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:12.2
[ 3.233658] pci 0000:00:13.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:13.0
[ 3.234010] pci 0000:00:13.2: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:13.2
(XEN) PCI add device 0000:00:14.0
[ 3.234507] pci 0000:00:14.2: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:14.2
(XEN) PCI add device 0000:00:14.3
[ 3.234910] pci 0000:00:14.4: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:14.4
[ 3.235189] pci 0000:00:14.5: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:14.5
[ 3.235526] pci 0000:00:15.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:15.0
[ 3.235846] pci 0000:00:15.1: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:15.1
[ 3.236165] pci 0000:00:15.2: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:15.2
[ 3.236484] pci 0000:00:15.3: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:15.3
[ 3.236771] pci 0000:00:16.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:16.0
[ 3.237114] pci 0000:00:16.2: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:16.2
(XEN) PCI add device 0000:00:18.0
(XEN) PCI add device 0000:00:18.1
(XEN) PCI add device 0000:00:18.2
(XEN) PCI add device 0000:00:18.3
(XEN) PCI add device 0000:00:18.4
(XEN) PCI add device 0000:00:18.5
(XEN) PCI add device 0000:01:00.0
(XEN) PCI add device 0000:01:00.1
[ 3.249960] pci 0000:00:02.0: PCI bridge to [bus 01]
(XEN) PCI add device 0000:02:00.0
[ 3.262050] pci 0000:00:04.0: PCI bridge to [bus 02]
(XEN) PCI add device 0000:03:00.0
[ 3.270108] pci 0000:00:05.0: PCI bridge to [bus 03]
(XEN) PCI add device 0000:04:00.0
[ 3.282205] pci 0000:00:09.0: PCI bridge to [bus 04]
(XEN) PCI add device 0000:05:00.0
[ 3.294245] pci 0000:00:0a.0: PCI bridge to [bus 05]
(XEN) PCI add device 0000:06:00.0
(XEN) PCI add device 0000:06:00.1
[ 3.306353] pci 0000:00:0b.0: PCI bridge to [bus 06]
[ 3.306686] pci 0000:00:0d.0: PCI bridge to [bus 07]
[ 3.306875] pci 0000:00:14.4: PCI bridge to [bus 08] (subtractive decode)
[ 3.307230] pci 0000:00:15.0: PCI bridge to [bus 09]
(XEN) PCI add device 0000:0a:00.0
[ 3.318445] pci 0000:00:15.1: PCI bridge to [bus 0a]
(XEN) PCI add device 0000:0b:00.0
[ 3.330496] pci 0000:00:15.2: PCI bridge to [bus 0b]
(XEN) PCI add device 0000:0c:00.0
[ 3.342567] pci 0000:00:15.3: PCI bridge to [bus 0c]
[ 3.343156] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 3.343357] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 3.343560] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 3.343763] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
[ 3.343948] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 3.344120] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 3.34429[ 4.101879] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.101998] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.102121] usb usb4: Product: xHCI Host Controller
[ 4.102205] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 4.102309] usb usb4: SerialNumber: 0000:0b:00.0
[ 4.102510] hub 4-0:1.0: USB hub found
[ 4.102584] hub 4-0:1.0: 2 ports detected
[ 4.102749] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 4.102772] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 4.102778] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
[ 4.102783] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.102801] ehci-pci 0000:00:13.2: debug port 1
[ 4.102885] ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
[ 4.103422] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 6
[ 4.103615] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.103731] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.103854] usb usb6: Product: xHCI Host Controller
[ 4.103938] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 4.104042] usb usb6: SerialNumber: 0000:0b:00.0
[ 4.104241] hub 6-0:1.0: USB hub found
[ 4.104316] hub 6-0:1.0: 2 ports detected
[ 4.104505] Already setup the GSI :23
[ 4.111171] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.111429] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.111546] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.111669] usb usb5: Product: EHCI Host Controller
[ 4.111753] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 4.111858] usb usb5: SerialNumber: 0000:00:13.2
[ 4.112089] hub 5-0:1.0: USB hub found
[ 4.112179] hub 5-0:1.0: 5 ports detected
[ 4.112493] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[ 4.112561] Already setup the GSI :23
[ 4.112658] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 7
[ 4.173731] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.173847] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.173971] usb usb7: Product: xHCI Host Controller
[ 4.174055] usb usb7: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 4.174159] usb usb7: SerialNumber: 0000:0c:00.0
[ 4.174362] hub 7-0:1.0: USB hub found
[ 4.174436] hub 7-0:1.0: 2 ports detected
[ 4.174599] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[ 4.174616] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 4.174622] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 8
[ 4.174626] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.174640] ehci-pci 0000:00:16.2: debug port 1
[ 4.174715] ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
[ 4.175243] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 9
[ 4.175434] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.175551] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.175674] usb usb9: Product: xHCI Host Controller
[ 4.175758] usb usb9: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 4.175862] usb usb9: SerialNumber: 0000:0c:00.0
[ 4.176054] hub 9-0:1.0: USB hub found
[ 4.176128] hub 9-0:1.0: 2 ports detected
[ 4.183183] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 4.183427] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.183546] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.183672] usb usb8: Product: EHCI Host Controller
[ 4.183757] usb usb8: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 4.183863] usb usb8: SerialNumber: 0000:00:16.2
[ 4.184081] hub 8-0:1.0: USB hub found
[ 4.184167] hub 8-0:1.0: 4 ports detected
[ 4.184867] ohci-pci: OHCI PCI platform driver
[ 4.185056] Already setup the GSI :18
[ 4.185150] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 4.185265] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 10
[ 4.185471] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[ 4.243229] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.243349] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.243473] usb usb10: Product: OHCI PCI host controller
[ 4.243564] usb usb10: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 4.243670] usb usb10: SerialNumber: 0000:00:12.0
[ 4.243882] hub 10-0:1.0: USB hub found
[ 4.243957] hub 10-0:1.0: 5 ports detected
[ 4.244215] Already setup the GSI :20
[ 4.244296] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 4.244396] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 11
[ 4.244580] ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000
[ 4.295176] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.299202] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.303212] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.303332] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.303464] usb usb11: Product: OHCI PCI host controller
[ 4.303555] usb usb11: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 4.303661] usb usb11: SerialNumber: 0000:00:13.0
[ 4.303867] hub 11-0:1.0: USB hub found
[ 4.303942] hub 11-0:1.0: 5 ports detected
[ 4.304201] Already setup the GSI :18
[ 4.304282] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 4.304381] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 12
[ 4.304545] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[ 4.351197] usb 2-3: new high-speed USB device number 2 using ehci-pci
[ 4.351782] general protection fault: 0000 [#1] SMP
[ 4.351878] Modules linked in: ohci_pci(+) crct10dif_pclmul crct10dif_common crc32c_intel ohci_hcd ehci_pci ehci_hcd xhci_hcd ahci libahci r8169 mii libata usbcore usb_common scsi_mod
[ 4.352221] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-4-amd64 #1 Debian 3.16.7-ckt4-1
[ 4.352365] Hardware name: To be filled by O.E.M. To be filled by O.E.M./SABERTOOTH 990FX R2.0, BIOS 2501 04/08/2014
[ 4.352545] task: ffffffff8181a460 ti: ffffffff81800000 task.ti: ffffffff81800000
[ 4.352673] RIP: e030:[<ffffffff812b662d>] [<ffffffff812b662d>] memcpy+0xd/0x110
[ 4.352806] RSP: e02b:ffff880447003e80 EFLAGS: 00010246
[ 4.352898] RAX: ffff72000d96bc18 RBX: 00000000ff79ab83 RCX: 0000000000000008
[ 4.353019] RDX: 0000000000000000 RSI: ffff8800001c1800 RDI: ffff72000d96bc18
[ 4.353141] RBP: 001fffffff79ab83 R08: 0000000000000000 R09: ffffffff81360600
[ 4.353263] R10: ffff8804473d6000 R11: ffff88042c01e118 R12: 0000000000000001
[ 4.353414] R13: 0000000000000000 R14: 0000000000000006 R15: 0000000000000000
[ 4.353539] FS: 00007f66bff44880(0000) GS:ffff880447000000(0000) knlGS:0000000000000000
[ 4.353677] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 4.353775] CR2: 00007f66bff43000 CR3: 000000042cfbf000 CR4: 0000000000040660
[ 4.353897] Stack:
[ 4.353934] ffffffff812cdd5d ffff88042cd59a00 ffff88042c4a3800 0000000000000000
[ 4.354068] ffffffffa0098e36 ffff88042cd59a00 ffff88042c4a3800 0000000000000000
[ 4.354202] 0000000000000000 ffffffffa0098f9b ffff880447003ef8 ffff88042c4a39d4
[ 4.354336] Call Trace:
[ 4.354380] <IRQ>
[ 4.354415] [<ffffffff812cdd5d>] ? swiotlb_tbl_unmap_single+0x10d/0x120
[ 4.354543] [<ffffffffa0098e36>] ? usb_hcd_unmap_urb_for_dma+0x96/0x190 [usbcore]
[ 4.354676] [<ffffffffa0098f9b>] ? __usb_hcd_giveback_urb+0x3b/0x100 [usbcore]
[ 4.354835] [<ffffffffa0099bae>] ? usb_giveback_urb_bh+0x8e/0xd0 [usbcore]
[ 4.354956] [<ffffffff8106c1a4>] ? tasklet_action+0xf4/0x100
[ 4.355056] [<ffffffff8106c591>] ? __do_softirq+0xf1/0x290
[ 4.355153] [<ffffffff8106c965>] ? irq_exit+0x95/0xa0
[ 4.355244] [<ffffffff813579b5>] ? xen_evtchn_do_upcall+0x35/0x50
[ 4.355352] [<ffffffff815113de>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 4.355467] <EOI>
[ 4.355501] [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
[ 4.355619] [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
[ 4.355728] [<ffffffff81009e0c>] ? xen_safe_halt+0xc/0x20
[ 4.355824] [<ffffffff8101c949>] ? default_idle+0x19/0xb0
[ 4.355920] [<ffffffff810a7dc0>] ? cpu_startup_entry+0x340/0x400
[ 4.356026] [<ffffffff81902071>] ? start_kernel+0x492/0x49d
[ 4.356155] [<ffffffff81901a04>] ? set_init_arg+0x4e/0x4e
[ 4.356250] [<ffffffff81903f64>] ? xen_start_kernel+0x569/0x573
[ 4.356354] Code: 66 0f 1f 44 00 00 e8 03 fc ff ff 48 8b 43 58 48 2b 43 50 88 43 4e eb e6 90 90 90 90 90 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b 4e 08 4c 8b 56 10 4c
[ 4.356803] RIP [<ffffffff812b662d>] memcpy+0xd/0x110
[ 4.356895] RSP <ffff880447003e80>
[ 4.356957] ---[ end trace f46bbc82c10d88b2 ]---
[ 4.357038] Kernel panic - not syncing: Fatal exception in interrupt
[ 4.357172] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)
(XEN) Domain 0 crashed: rebooting machine in 5 seconds.
(XEN) Resetting with ACPI MEMORY or I/O RESET_REG.?
More information about the Pkg-xen-devel
mailing list