[sane-devel] Snapscan 310 not recognized by scanimage

Yannick sevmek at free.fr
Wed Apr 17 19:16:07 BST 2002


Le Mercredi 17 Avril 2002 18:52, vous avez écrit :
> Hi,
>
> On Wed, Apr 17, 2002 at 04:27:41PM +0200, Yannick wrote:
> > The find scanner output :
> > $ sane-find-scanner -v
>
> [...]
>
> > sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device 
> > /dev/scanner sane-find-scanner: found SCSI CD-drive "YAMAHA CRW4001 1.0c"
> > at device  /dev/sg0 sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN
> > 310 1.20" at device /dev/sg1
>
> [...]
>
> > The xscanimage output :
> >
> > [yan at localhost yan]$export SANE_DEBUG_SNAPSCAN=2
> >
> > [yan at localhost yan]$ xscanimage
> > [sanei_debug] Setting debug level of snapscan to 2.
> > [snapscan] add_device: "YAMAHA CRW4001" is not one of AGFA SnapScan 300,
> > 310, 600, 1212, 1236, e20, e25, e26, e40, e42, e50, e52 or e60
> > Acer 300, 310, 610, 610+, 620, 620+, 640, 1240, 3300, 4300 or 5300
> > Guillemot MaxiScan A4 Deluxe
>
> For some reason snapscan checks your CD drive only. Have a look at
> snapscan.conf, maybe there is a "/dev/sg0" in this file? Change it to
> "/dev/sg1" (or "/dev/scanner").

My "scanscan.conf" after your advice :
#scsi AGFA
#scsi COLOR
#scsi ACERPERI

# If not automatically found from above, then you may manually specify
# a device name.
/dev/sg1
#/dev/scanner
#/dev/usbscanner
#/dev/sga

[root at localhost yan]# export SANE_DEBUG_SNAPSCAN=2
[root at localhost yan]# xscanimage 
[sanei_debug] Setting debug level of snapscan to 2.
[snapscan] add_device: "YAMAHA CRW4001" is not one of AGFA SnapScan 300, 310, 
600, 1212, 1236, e20, e25, e26, e40, e42, e50, e52 or e60
Acer 300, 310, 610, 610+, 620, 620+, 640, 1240, 3300, 4300 or 5300
Guillemot MaxiScan A4 Deluxe
[xscanimage] No scanners were identified. If you were expecting something
          different, check that the scanner is plugged in, turned on and
          detected by sane-find-scanner (if appropriate). Please read
          the documentation which came with this software (README, FAQ,
          manpages).

Result is the same...

before my "snapscan.conf" was:
scsi AGFA
scsi COLOR
scsi ACERPERI

# If not automatically found from above, then you may manually specify
# a device name.
/dev/scanner
#/dev/usbscanner
#/dev/sga

Thank you,
Yannick Defais

>
> The backend maintainers may have more tips about this one...
>
> Bye,
>   Henning
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel



More information about the sane-devel mailing list