[sane-devel] Epson GT-8200U: "Could not send command to scanner"

Steve Frampton frampton at codingstyle.com
Sat Jul 6 11:38:40 BST 2002


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi again:

For anybody wondering what could have been possibly wrong with my GT-8200U 
not working under Linux, I ended up trying it under Windows as well...and 
it didn't work there, either.  Turns out there was a mechanical defect, 
and I called up my retail store and they quickly swapped it for a new 
unit.

Works perfectly under both *nix and Windows now.  Heheh.
Thanks to everyone for your suggestions, anyway.  ;-)

On Thu, 20 Jun 2002, Steve Frampton wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Hello:
> 
> Thanks for the tips.  Replies to your questions are in-line...
> 
> On Thu, 20 Jun 2002, Karl Heinz Kremer wrote:
> 
> > Did you upgrade your system to Red Hat 7.3? If so, try this:
> > rpm -e --nodeps sane-backends
> > rpm -ivh sane-backends-1.0.7-6.i386.rpm
> > (you need the sane-backends-...rpm file from your distribution).
> 
> I'm running 7.2 and am not able to upgrade to 7.3 at this time (booting
> with the Red Hat 7.3 boot.img or bootnet.img diskettes just give me the 
> error, "Not a boot diskette.  Please insert a boot diskette and try 
> again").  However, I did install the usblibs and sane packages from the 
> 7.3 distribution CD's by hand:
> 
>   libusb-devel-0.1.5-3
>   libusb-0.1.5-3
>   sane-backends-devel-1.0.7-6
>   sane-frontends-1.0.7-2
>   sane-backends-1.0.7-6
>   xsane-0.84-2
> 
> I also have installed:
> 
>   iscan-1.3.0-1
> 
> > Which version of Sane are you using? 
> > Do you have any other USB devices that work? 
> 
> I recently ripped out my PS/2 mouse and plugged in a USB optical mouse.  
> It was plug and play, basically.
> 
> > Do you see any messages on the console that could be related to the scanner? 
> 
> Nothing came up on the console...
> 
> > Is your Linux distribution using USB hotplugging? 
> 
> Ermmm, no idea.  ;-)
> 
> > What permissions are on the /dev/usb/scanner0 device file?
> 
> 666.
> 
> I also did an attempted scan in debug mode:
> 
> export SANE_DEBUG_EPSON=128
> xscanimage > /tmp/scan.log 2>&1
> 
> The result was a long scan.log file showing lots of diagnostic material 
> (all successful), some "warm up" messages, some "expected xyz, got xyz" 
> messages (ie. all matched), and then "fatal error" as the very last line 
> of the file. :p
> 
> Anything else I should check into?
> 
> Thanks again...
> 
> > On Thu, Jun 20, 2002 at 08:48:29AM -0700, Steve Frampton wrote:
> > > Hello:
> > > 
> > > After looking at several scanners and rejecting those whose 
> > > manufacturer's are too stupid to support Linux, I just purchased an Epson 
> > > GT-8200U, based on the positive things I've read about Epson scanner 
> > > support under Linux, and especially due to the efforts of Epson Kowa to 
> > > bring high quality Epson scanning support to Linux.
> > > 
> > > I followed the instructions at http://www.epkowa.co.jp/linux/lsd_note.html
> > > but when trying to use xsane or iscan, the scanner does its warm up, and
> > > then I get the error, "Could not send command to scanner" from iscan, or 
> > > "Error during read: Invalid argument" from xsane.
> > > 
> > > I did a /sbin/modprobe scanner vendor=0x04b8 product=0x0110
> > > where the vendor and product were reported in /proc/bus/usb/devices prior 
> > > to running iscan, so it should know how to communicate properly.
> > > 
> > > Does anybody else here have this model and have successfully got it to 
> > > scan?  I'm using Red Hat 7.2, kernel 2.4.17.  By the way, just in case 
> > > there are hardware differences, my scanner is a Japanese model.
> > > 
> > > Thanks in advance.
> 
> - -----------------< codingstyle.com: What's your style? >----------------
> Steve Frampton   <frampton at codingstyle.com>   http://www.codingstyle.com
> GNU Privacy Guard ID: 99F18E3A  (see http://www.gnupg.org/ for details)
> GNU-PG Fingerprint: 244D FA2F 5EAB 6F52 41B4  8FB4 D4F4 0738 99F1 8E3A
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.0.6 (GNU/Linux)
> Comment: For info see http://www.gnupg.org
> 
> iD8DBQE9Eonl1PQHOJnxjjoRAtrOAJ46EQ4lzVnt5Mbk/PTVeyI295UoXwCeMAZ8
> tS1QQgyDUR1I3WLUL3CIE3Q=
> =xJQH
> -----END PGP SIGNATURE-----
> 
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
> 

- -- 

- -----------------< codingstyle.com: What's your style? >----------------
Steve Frampton   <frampton at codingstyle.com>   http://www.codingstyle.com
GNU Privacy Guard ID: 99F18E3A  (see http://www.gnupg.org/ for details)
GNU-PG Fingerprint: 244D FA2F 5EAB 6F52 41B4  8FB4 D4F4 0738 99F1 8E3A
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE9Jsiy1PQHOJnxjjoRAmEEAJ96c02QcAgSIH1cly9nIQR7ergtWQCfWATv
rcbFUYER0hcolbq4aC4MCgc=
=vxIK
-----END PGP SIGNATURE-----




More information about the sane-devel mailing list