[sane-devel] scanjet HP5300C

COLLINEAU Franck FTRD/DMI/TAM franck.collineau at rd.francetelecom.com
Tue Jul 16 10:17:40 BST 2002


Hi 
thank for your answer.

Here are results of different commands:
lsmod:
Module                  Size  Used by    Not tainted
isofs                  25792   0  (autoclean)
inflate_fs             19328   0  (autoclean) [isofs]
sb                      7744   0 
sb_lib                 33888   0  [sb]
uart401                 6336   0  [sb_lib]
sound                  57292   0  [sb_lib uart401]
soundcore               4068   5  [sb_lib sound]
af_packet              12488   0  (autoclean)
ip_vs                  65400   0  (autoclean)
usb-uhci               21668   0  (unused)
usbcore                59072   1  [usb-uhci]
3c59x                  25928   0  (autoclean) (unused)
supermount             62180   2  (autoclean)
ext3                   61856   1  (autoclean)
jbd                    39512   1  (autoclean) [ext3]
rtc                     5880   0  (autoclean)
reiserfs              169312   4 

dmesg | grep -i usb:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 09:46:29 Jul 16 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xfca0, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver


cat /proc/bus/usb/devices:

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=fca0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms


I don't know how install patch there is no installation guide.

Thank you again for your help

Franck


-----Original Message-----
From: Rene Rebe [mailto:rene.rebe at gmx.net]
Sent: Monday, July 15, 2002 5:37 PM
To: COLLINEAU Franck FTRD/DMI/TAM
Cc: sane-devel at mostang.com
Subject: Re: [sane-devel] scanjet HP5300C


Hi.

On: Mon, 15 Jul 2002 17:27:03 +0200,
    "COLLINEAU Franck FTRD/DMI/TAM" <franck.collineau at rd.francetelecom.com> wrote:
> Greetings,
>  
> I would like to install a scanjet HP 5300C under Mandrake 8.2
> I have re-compiled the kernel with scsi generic suport checked and build as module HP53XX usb scanner support.
> But no scanner is detected 
> /proc/scsi/scsi is empty.
>  
> What does I have to do now ?

What does lsmod say? Is the hpusbscsi module loaded? Are the usb-core
modules loaded and your chip recognized ("dmesg | grep -i usb" shold
give you the answer)?

Also please use the latest backend from:

The Avision homepage is:
  http://drocklinux.dyndns.org/rene/avision/

And the new backend version can be obtained from:
  http://www.rocklinux.org/people/rene/sane/
  http://www.rocklinux.de/people/rene/sane/
  http://www2.rocklinux.org/people/rene/sane/

> Thanks 
>  
> Franck

k33p h4ck1n6
  René

--  
René Rebe (Registered Linux user: #248718 <http://counter.li.org>)
e-mail:   rene.rebe at gmx.net, rene at rocklinux.org
web:      www.rocklinux.org, drocklinux.dyndns.org/rene/

Anyone sending unwanted advertising e-mail to this address will be
charged $25 for network traffic and computing time. By extracting my
address from this message or its header, you agree to these terms.



More information about the sane-devel mailing list