[sane-devel] MacOSX 10.3.2 and Fujitsu fi-4120C

Henning Meier-Geinitz henning at meier-geinitz.de
Wed Dec 24 16:18:36 GMT 2003


Hi,

On Wed, Dec 24, 2003 at 02:52:10PM +0100, avv. Giovanni Rocchi wrote:
> after posted here my problem this morning I set SANE_DEBUG_SANEI_USB to 
> 255.
> 
> Running scanimage -L I have this:

[works only with debugging enabled]

That's the known problem with libusb (or the MacOS X USB system?).

> >PB17:/usr/local/bin grocchi$ ./scanimage > ~grocchi/test.pnm
[...]

> >[sanei_debug] Setting debug level of fujitsu to 0.

Can you enable debugging for fujitsu also? It's easier to understand
if the fujitsu messages are also enabled.

> >[sanei_usb] sanei_usb_read_bulk: trying to read 13 bytes
> >usb_bulk_read: ep addr = 0x81
> >Converting ep address to pipeRef.
> >ep_to_pipeRef: Pipe 1: DIR: 1 number: 1
> >ep_to_pipeRef: pipeRef for ep address 0x81 found: 0x01
> >usb_bulk_read: endpoint=0x81 size=13 timeout=30.000000sec
> >[sanei_usb] 0000: 53 00 00 00 00 00 00 00 00 00 00 00 00          
> >S...............
> >[sanei_usb] sanei_usb_read_bulk: wanted 13 bytes, got 13 bytes
> >[sanei_usb] sanei_usb_write_bulk: trying to write 31 bytes
> >[sanei_usb] 0000: 43 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
> >C...............
> >[sanei_usb] 0010: 00 00 00 28 00 00 00 00 00 00 77 04 00 00 00    
> >...(......w.....
> >Converting ep address to pipeRef.
> >ep_to_pipeRef: an error occurred getting pipe information on pipe 1
> >ep_to_pipeRef: No connection to IOService

This seems to be the first error.

My guess is: the fujitsu backend uses fork () and this doesn't work
correctly on MacOS X. So if you want support for your scanner, the
fujitsu backend must be converted to use the sanei_thread API instead
of fork().

Have a look at the archive of sane-devel for a discussion about the
fork problems.

Bye,
  Henning




More information about the sane-devel mailing list