[sane-devel] Canon630u: scanimage: sane_start: Device busy

Greg Kubaczkowski greg.kubaczkowski at utoronto.ca
Wed Jan 15 05:10:27 GMT 2003


Hi all

I hoping someone has seen a similar problem and found a solution for it.  I
have seen some posting on the subject, but could not find any answers that
would work for me...

I have a RedHat 8.0, sane 1.0.8 (tried with 1.0.9 - same result) and
Canon630u.  The system recognizes my scanner, but scanimage -d
canon630u:/dev/usb/scanner0 results in Device busy error.

At certain point it actually worked!  I used xsane and was able to scan an
image. After reboot I could not get it to work anymore...

Here is some more info:

/etc/sane.d/canon630u:
# Options for the canonusb backend
# Autodetect the Canon CanoScan FB630u
#usb 0x04a9 0x2204
/dev/usb/scanner0
# device list for non-linux-systems (enable if autodetect fails):
#/dev/scanner
#/dev/usb/scanner0

/etc/modules.conf:
alias char-major-81 scanner
options scanner vendor=0x4a9 product=0x2204

sane-find-scanner:
# Note that sane-find-scanner will find any scanner that is connected
# to a SCSI bus and some scanners that are connected to the Universal
# Serial Bus (USB) depending on your OS. It will even find scanners
# that are not supported at all by SANE. It won't find a scanner that
# is connected to a parallel or proprietary port.

sane-find-scanner: found USB scanner (vendor = 0x04a9, product = 0x2204) at
device /dev/usb/scanner0
sane-find-scanner: found USB scanner (vendor = 0x04a9, product = 0x2204) at
device /dev/usbscanner0


scanimage -L:
device `canon630u:/dev/usb/scanner0' is a CANON Canoscan FB630U flatbed
scanner

scanimage -d canon630u:/dev/usb/scanner0
scanimage: sane_start: Device busy

Any help would be greatly appreciated.

Thanks,

Greg.




-----Original Message-----
From: sane-devel-admin at www.mostang.com
[mailto:sane-devel-admin at www.mostang.com]On Behalf Of Olaf Meeuwissen
Sent: Tuesday, January 14, 2003 8:21 PM
To: Henning Meier-Geinitz
Cc: SANE Mailing List
Subject: Re: [sane-devel] Feature freeze for SANE 1.0.10


Henning Meier-Geinitz <henning at meier-geinitz.de> writes:

> Does it make sense to add a .desc file in the external section? So
> the epson kowa backend would show up on the SANE webpage as external
> backend.

I guess it would.  While we are at it, I guess you could also add
"Image Scan! for Linux" to the frontends page.

> If yes, could you (or someone else) provide a epson-kw.desc (or
> whatever name)?

Could you send me a sample?  I'll see what I can do.
--
Olaf Meeuwissen                            EPSON KOWA Corporation, ECS
GnuPG key: 6BE37D90/AB6B 0D1F 99E7 1BF5 EB97  976A 16C7 F27D 6BE3 7D90
Penguin's lib!       -- I hack, therefore I am --               LPIC-2
_______________________________________________
Sane-devel mailing list
Sane-devel at www.mostang.com
http://www.mostang.com/mailman/listinfo/sane-devel




More information about the sane-devel mailing list