[sane-devel] opticpro9636 T

[Gerhard Jaeger]

Hi,

as you're using the 0.40version with SANE-backends 1.0.9, I expect a
version conflict! Use the latest module 0.42.
Simply unpack this one, recompile, reinstall and reload it, then the old one
will be removed automatically...

Gerhard

On Donnerstag, 15. Mai 2003 23:39, Ernie Schroder wrote:
> On Thursday 15 May 2003 05:21 pm, a tiny voice compelled you to write:
> > Hi,
> >
> > I'm sending this back to the sane-devel list as I personally don't
> > have much experience with the plustek backend. Still trying to
> > answer...
> >
> > On Thu, May 15, 2003 at 04:47:31PM -0400, Ernie Schroder wrote:
> > >  # SANE_DEBUG_PLUSTEK=255 scanimage -L
> > > [sanei_debug] Setting debug level of plustek to 255.
> > > [plustek] Plustek backend V0.44-10, part of sane-backends 1.0.9
> > > [plustek] ># Plustek-SANE Backend configuration file<
> > > [plustek] ># For use with Plustek parallel-port scanners and<
> > > [plustek] ># LM9831/2/3 based USB scanners<
> > > [plustek] ><
> > > [plustek] ># For parport devices use the parport section<
> > > [plustek] >#<
> > > [plustek] >[parport]<
> > > [plustek] next device is a PARPORT device
> > > [plustek] >device /dev/pt_drv<
> > > [plustek] Decoding device name >/dev/pt_drv<
> > > [plustek] ><
> > > [plustek] >#<
> > > [plustek] ># leave the default values as specified in
> > > /etc/modules.conf< [plustek] >#<
> > > [plustek] >#option warmup=30<
> > > [plustek] >#option lOffOnEnd=0<
> > > [plustek] >#option lampOff=0<
> > > [plustek] >#option port=0x378<
> > > [plustek] ><
> > >
> > > > The device node for the pt_drv in /dev does exist and the user
> > > > has access permissions for it?
> > >
> > > there is a /dev/scanner/pt_drv.(no /dev/pt_drv) Permissions are ok:
> > > ls -l /dev/scanner/pt_drv0
> > > crwxrwxrw-    1 root     wheel     40,   0 Dec 31  1969
> > > /dev/scanner/pt_drv0
> >
> > The path is wrong. It's /dev/pt_drv. Or change plustek.conf to
> > /dev/scanner/pt_drv.
> >
> > > and as root I do:
> > > scanimage --device-name plustek:/dev/scanner/pt_drv0
> > > scanimage: open of device plustek:/dev/scanner/pt_drv failed: Error
> > > during device I/O
> > >
> > > should I sym-link /dev/scanner/pt_drv0 to /dev/pt_drv?
> >
> > Yes, that's another way to do it.
>
> I tried the sym-link, no help
>
> How do I remove the  plustek-module-0_40_17 so I can built plustek
> module: 0_42_9?