[sane-devel] new kde, kills sane

Gene Heskett gene.heskett at verizon.net
Mon May 19 18:18:19 BST 2003


Humm, the missus just came in and said can you scan this?  The last 
time I used the scanner it was working great, but now the icon that 
launches xsane goes thru the root warning and then scans for 
devices forever, or until I call ksysguard and kill it.

sane-find-scanner shows this:
---------------------------
[root at coyote root]# sane-find-scanner

  # No SCSI scanners found. If you expected something different, 
make sure that
  # you have loaded a SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04b8, product=0x010f) at 
/dev/usb/scanner0
found USB scanner (vendor=0x1453, product=0x4026) at libusb:002:005
^^^^^^^^^^^^^not a scanner, but a usb-serial adaptor^^^^^^^^^^^^^
found USB scanner (vendor=0x04b8 [EPSON], product=0x010f [EPSON 
Scanner 010F]) at libusb:002:003
  # Your USB scanner was (probably) detected. It may or may not be 
supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Scanners connected to the parallel port or other proprietary 
ports can't be
  # detected by this program.
-------------------------

scanimage -L hangs forever also, but can be ctrl-c'd.
Next, I reconfiguring and reinstalling all 3 pieces, which if that 
doesn't fix, I'll be back.
xsane is .90, sane-backends is 1.0.11, sane-frontends is 1.0.10, and 
it all worked great before I installed kde-3.1.1a and or that 
usb-serial adaptor, a prologic that works just fine also.

-- 
Cheers, Gene
AMD K6-III at 500mhz 320M
Athlon1600XP at 1400mhz  512M
99.26% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attornies please note, additions to this message
by Gene Heskett are:
Copyright 2003 by Maurice Eugene Heskett, all rights reserved.




More information about the sane-devel mailing list