[sane-devel] Mac OS X - xsane and Microtek Scanmaker II

David B Brown david_b_brown at mac.com
Mon Sep 1 15:56:16 BST 2003


Guy,

	I'm no expert on this and since I use fink to install this was a  
little tricky.

	Here's what I did. I edited the fink info file for sane-backends to  
uncomment the patch command, and placed the patch file in the same  
directory as the fink info file. The I ran a fink rebuild command. As  
the build was in progress I was able to see the patch executing, so I'm  
pretty sure it worked ok.  Is there any way to double check ?

	Anyway the good or the bad news depending on how you look at it, is  
that I get the same issue


[microtek] sane_start...
[microtek] sane_get_parameters...
[microtek] sane_get_parameters:  regular 3-pass color
[microtek] sane_get_parameters:  res_code = 19 (13)
[microtek] sane_get_parameters:  dots_per_mm:  2.244094
[microtek] sane_get_parameters:  units_per_mm:  11.811024
[microtek] WIDTHPIX:  before exp: 484
[microtek] sane_get_parameters:  lines: 798  ppl: 484  bpl: 484
[microtek] set_pass_parameters:  three-pass, on 2
[sanei_debug] Setting debug level of sanei_scsi to 255.
[microtek] .wait_ready 0...
[microtek] wait_ready failed (0)
[microtek] wait_ready failed (1)
[microtek] wait_ready failed (2)
[microtek] wait_ready failed (3)
[microtek] wait_ready failed (4)
[microtek] wait_ready failed (5)
[microtek] wait_ready failed (6)
[microtek] end_scan...


	Thanks for the attention.

	Cheers


David


	
On Monday, September 1, 2003, at 10:11 AM, Guy Brooker wrote:

> On 29/8/03 6:41 pm, "abel deuring" <a.deuring at satzbau-gmbh.de> wrote:
>>
>> I hope that Matt (the maintainer of the Microtek backend) will correct
>> any errors in my understanding of the Mircoek backend, and that Guy
>> Brooker <guy_brooker at mac.com> or Mattias Ellert
>> <mattias.ellert at tsl.uu.se>, who wrote the SCSI support for MacOS X,  
>> can
>> give better comments.
>>
>
> Hi David,
>
> The SCSI support in 10.0.12 was written by Mattias. I recently added a  
> new
> port to sanei_scsi, that uses APIs available in Jaguar (OS X 10.2 and  
> later)
> that adds support for FireWire scanners and SCSI devices plugged in to
> either SCSI cards or SCSI to FireWire adapters.
>
> The patch is now officially included in the current CVS release of  
> sane,
> though if you'd like to give it a try with the minimal fuss, a zip  
> archive
> for the patch to 1.0.12 is available at
>
> http://homepage.mac.com/guy_brooker/.cv/guy_brooker/Public/Sane/sane- 
> backend
> s-1.0.12-osx.zip-link.zip
>
> (type 'man patch' for instructions on how to apply)
>
> I've no idea if it will make any difference at all, in fact it's  
> probably
> more likely to be something in the backend rather than sanei_scsi, but  
> it's
> worth a try.
>
> Let us know if this makes any difference.
>
> Cheers
> Guy
>




More information about the sane-devel mailing list