[sane-devel] Canon FB630u with Kernel 2.6

Wed, 12 Jan 2005 23:33:29+0200

Hello Allan,

yes I use Suse 9.2.

I deinstalled sane with Suse and I downloaded Sane 1.0.15 and builded it myself.

Now the resmgr-erreo is away, but I still can't scan:

linux:/home/cneugeb # /usr/local/bin/scanimage -L
device `canon630u:libusb:001:003' is a CANON Canoscan FB630U flatbed scanner
device `test:0' is a Noname frontend-tester virtual device
device `test:1' is a Noname frontend-tester virtual device

linux:/home/cneugeb # /usr/local/bin/scanimage
scanimage: sane_start: Device busy

and that gives me those entrys in /var/log/messages:
Jan 12 23:27:16 linux kernel: usb 1-1: control timeout on ep0out
Jan 12 23:27:16 linux kernel: usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd scanimage rqt 64 rq
12 len 1 ret -110
Jan 12 23:27:16 linux kernel: usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd scanimage rqt 64 rq
12 len 1 ret -71
Jan 12 23:27:17 linux last message repeated 381 times

Christian

m. allan noah wrote:
> you are using suse, or some other distibution with resource manager
> compiled into sane. i wonder if just downloading and building sane
> yourself (without resmgr) might help?
>
> allan
>
> On Wed, 12 Jan 2005 cneugeb@mysc.de wrote:
> > Bertrik Sikken wrote:
> >> cneugeb@mysc.de wrote:
> >>> This is my output of lsusb :
> >>> Bus 005 Device 003: ID 07cc:0350 Carry Computer Eng., Co., Ltd
> >>> Bus 005 Device 001: ID 0000:0000
> >>> Bus 004 Device 001: ID 0000:0000
> >>> Bus 003 Device 001: ID 0000:0000
> >>> Bus 002 Device 001: ID 0000:0000
> >>> Bus 001 Device 003: ID 04a9:2204 Canon, Inc. CanoScan FB630U
> >>> Bus 001 Device 001: ID 0000:0000
> >>>
> >>>
> >>>
> >>> and I have this canonfb630u.conf file:
> >>>
> >>> # Options for the canonusb backend
> >>>
> >>> # Autodetect the Canon CanoScan FB630u
> >>> usb 0x04a9 0x2204
> >>>
> >>> # device list for non-linux-systems (enable if autodetect fails):
> >>> #/dev/scanner
> >>> #/dev/usb/scanner0
> >>> usb 0x4a9 0x2204            .
> >>
> >> The '.' at the end of the line is a cut-and-paste error I presume?
> >
> > Yes, the '.' is not in the file.
> >
> >>> scanimage -L can detect my scanner:
> >>> linux:/etc/sane.d # scanimage -L
> >>> device `canon630u:libusb:001:003' is a CANON Canoscan FB630U flatbed
> >>> scanner
> >>
> >> Good. This means a lot of stuff works already.
> >>
> >>> but when I try to scan:
> >>> linux:/etc/sane.d # scanimage
> >>> scanimage: sane_start: Device busy
> >>>
> >>> and I get those entrys in /var/log/messages
> >>> Jan 11 21:34:40 linux scanimage: resmgr: server response code 502
> >>> Jan 11 21:34:40 linux last message repeated 8 times
> >>> Jan 11 21:34:40 linux scanimage: resmgr: server response code 200
> >>> Jan 11 21:34:40 linux last message repeated 4 times
> >>> Jan 11 21:34:40 linux scanimage: resmgr: server response code 501
> >>> Jan 11 21:35:10 linux kernel: usb 1-1: control timeout on ep0out
> >>> Jan 11 21:35:10 linux kernel: usb 1-1: usbfs: USBDEVFS_CONTROL failed
> >>> cmd scanimage rqt 64 rq 12 len 1 ret -110
> >>> Jan 11 21:35:10 linux kernel: usb 1-1: usbfs: USBDEVFS_CONTROL failed
> >>> cmd scanimage rqt 64 rq 12 len 1 ret -71
> >>
> >> No idea why it says "USBDEVFS_CONTROL failed", could be a kernel
> >> problem. Also the "scanimage: resmgr: server response code" does
> >> not look familiar to me, sorry.
> >>
> >> Stupid question: does it work when you run it as root?
> >>
> >> Regards,
> >> Bertrik
> >
> > No, it does not work when I try it as root, no difference if I call it as
> > root or as normal user.
> >
> > Regards
> > Christian

__________________________________________________
:-) kassiere für jede versandte eMail 2,0 Cent (-:
    http://www.mysc.de --- http://www.mysc.at