[sane-devel] PIXMA backend Canon i-SENSYS MF633cdw Support

[Wojciech Teichert]

pixma.log have one line: scanimage: no SANE devices found

2018-01-22 19:34 GMT+01:00 Rolf Bensch <rolf at bensch-online.de>:

> Hi Wojciech,
>
> Please provide a logfile created with:
>
> $ SANE_DEBUG_PIXMA=4 scanimage 2> pixma.log > pixma.pnm
>
> Please zip, tar.gz or 7zip pixma.log and send it to me.
>
> Cheers,
> Rolf
>
> Am 22.01.2018 um 03:29 schrieb Wojciech Teichert:
>
>  scanimage -L
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
> root@### sane-find-scanner
>
>   # sane-find-scanner will now attempt to detect your scanner. If the
>   # result is different from what you expected, first make sure your
>   # scanner is powered up and properly connected to your computer.
>
>   # No SCSI scanners found. If you expected something different, make sure
> that
>   # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> found USB scanner (vendor=0x04a9 [Canon], product=0x27e1 [MF633C/635C]) at
> libusb:001:005
>   # Your USB scanner was (probably) detected. It may or may not be
> supported by
>   # SANE. Try scanimage -L and read the backend's manpage.
>
>   # Not checking for parallel port scanners.
>
>   # Most Scanners connected to the parallel port or other proprietary ports
>   # can't be detected by this program.
> root@### scanimage -L
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages)
>
> This is new version from git://git.debian.org/sane/sane-backends.git
> using ./configure --prefix=/usr --libdir=/usr/lib/x86_64-linux-gnu
> --sysconfdir=/etc --localstatedir=/var --enable-avahi && make -j4
>
> 2018-01-03 21:09 GMT+01:00 Rolf Bensch <rolf at bensch-online.de>:
>
>> Hi Wojtek,
>>
>> I just added your scanner to SANE. Please check out the recent version
>> from git or you can use the daily git snapshot tomorrow.
>>
>> Please report if all scanning features (75-600dpi, simple and duplex
>> document feeder) are running with USB. After this you can try the bjnp
>> interface.
>>
>> Hope this helps.
>>
>> Cheers,
>> Rolf
>>
>>
>> Am 13.12.2017 um 09:58 schrieb Wojtek Teichert:
>> >  Can you add support for Canon i-SENSYS MF633cdw scanner?
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20180123/60b025ab/attachment.html>