[sane-devel] Canon MG3050

[kamp000x at arcor.de]

Thanks, as mentioned before, scanning over usb is working.

But scanning over wifi is not working, it ends up with this error message.

Would be nice, if this would work, on the sane page it is sill listed
with "Testers needed". I could provide some test logs if required.

Here are both logs, with usb and wifi only:

https://pastebin.com/VP4nRYUb


Cheers,

Kamp


On 04.08.19 11:28, Rolf Bensch wrote:
> Hi Kamp,
>
> Please try to scan via USB with disabled WiFi. If this isn't working,
> please provide the created log file:
> $ SANE_DEBUG_PIXMA=11 scanimage 2> pixma.log > pixma.pnm
>
> Hope this helps.
>
> Cheers,
> Rolf
>
>
> Am 03.08.19 um 21:31 schrieb kamp000x at arcor.de:
>> So sorry, these are the correct versions:
>>
>> [code]
>>
>> ii  libsane-common                               
>> 1.0.27-1~experimental3ubuntu2.1              all          API library
>> for scanners -- documentation and support files
>> ii  libsane-hpaio:amd64                          
>> 3.17.10+repack0-5                            amd64        HP SANE
>> backend for multi-function peripherals
>> ii  libsane1:amd64                               
>> 1.0.27-1~experimental3ubuntu2.1              amd64        API library
>> for scanners
>> ii  sane-utils                                   
>> 1.0.27-1~experimental3ubuntu2.1              amd64        API library
>> for scanners -- utilities
>> ii  xsane                                        
>> 0.999-5ubuntu2                               amd64        featureful
>> graphical frontend for SANE (Scanner Access Now Easy)
>> ii  xsane-common                                 
>> 0.999-5ubuntu2                               all          xsane
>> architecture independent files
>> [/code]
>>
>>
>> USB is working, wifi not.
>>
>> I updated with your repo to version 1.0.28+git20190802, same problem here.
>>
>> [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
>> bjnp://192.168.***.**:8612/timeout=10000
>>
>> Regards,
>>
>> Kamp
>>
>> On 03.08.19 19:18, Rolf Bensch wrote:
>>> Hi Kamp,
>>>
>>> No wonder, your SANE installation is outdated and doesn't support
>>> MG3050. SANE version must be >= 1.0.27. Please update SANE e.g. from my
>>> PPA: https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git .
>>>
>>> Due to your scanner is in 'untested' status, please try to scan via USB
>>> first. If this is working, then you can switch to WiFi.
>>>
>>> Debug hints and BJNP setup are described in the man page '$ man sane-pixma'
>>>
>>> Hope this helps.
>>>
>>> Cheers,
>>> Rolf
>>>
>>>
>>> Am 03.08.19 um 11:38 schrieb kamp000x at arcor.de:
>>>> Thanks.
>>>>
>>>> This Scanner is working over usb, but not over wifi.
>>>>
>>>> Can I scan over network with is printer?
>>>>
>>>> This device is connected to my wifi network and I can print.
>>>>
>>>> The IP address is located in the file "/etc/sane.d/pixma.conf"
>>>> # Canon MG3050
>>>> bjnp://192.168.***.**
>>>>
>>>> Output scanimage:
>>>>
>>>> [CODE]
>>>>
>>>> scanimage -L
>>>> [bjnp] udp_command: ERROR - no data received
>>>> [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping
>>>> this scanner
>>>> [bjnp] udp_command: ERROR - no data received
>>>> [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
>>>> bjnp://192.168.***.**
>>>>
>>>> No scanners were identified. If you were expecting something different,
>>>> check that the scanner is plugged in, turned on and detected by the
>>>> sane-find-scanner tool (if appropriate). Please read the documentation
>>>> which came with this software (README, FAQ, manpages).
>>>>
>>>> [/CODE]
>>>>
>>>>
>>>> [CODE]
>>>>
>>>> ii  libsane:amd64                                
>>>> 1.0.25+git20150528-1ubuntu2.16.04.1        amd64        API library for
>>>> scanners
>>>> ii  libsane-common                               
>>>> 1.0.25+git20150528-1ubuntu2.16.04.1        all          API library for
>>>> scanners -- documentation and support files
>>>> ii  sane-utils                                   
>>>> 1.0.25+git20150528-1ubuntu2.16.04.1        amd64        API library for
>>>> scanners -- utilities
>>>> ii  xsane                                        
>>>> 0.999-3ubuntu1                             amd64        featureful
>>>> graphical frontend for SANE (Scanner Access Now Easy)
>>>> ii  xsane-common                                 
>>>> 0.999-3ubuntu1                             all          xsane
>>>> architecture independent files
>>>> [/CODE]
>>>>
>>>> Ubuntu Version: 18.04 LTS
>>>>
>>>> I tested ubuntu 19.04, with the same result.
>>>>
>>>>
>>>> Regards
>>>>
>>>> Kamp
>>>>
>>>> On 04.02.18 12:58, Rolf Bensch wrote:
>>>>> Hi,
>>>>>
>>>>> Your scanner should work. Please try the scanner connected via USB and
>>>>> report your results.
>>>>>
>>>>> Hope this helps.
>>>>>
>>>>> Cheers,
>>>>> Rolf
>>>>>
>>>>>
>>>>> Am 29.01.2018 um 16:23 schrieb kamp000x at arcor.de:
>>>>>> Hi,
>>>>>>
>>>>>>
>>>>>> can I check if the MG3050 is still supported without inserting cartridges?
>>>>>>
>>>>>> I need a sane supported scanner, otherwise I still can return the device.
>>>>>>
>>>>>>
>>>>>> http://www.sane-project.org/sane-mfgs.html
>>>>>>
>>>>>> Current sane status:
>>>>>>
>>>>>> PIXMA MG3000 Series     USB WiFi     0x04a9/0x180b     Untested    
>>>>>> Testers needed!
>>>>>>
>>>>>>
>>>>>> Thanks.
>>>>>>
>>>>>> Regards,
>>>>>> Kamp
>>>>>>
>>>>>>
>>>>>>