[Nut-upsuser] Have an older Back-UPS Pro 1400(BP1400) can't get detailed info.

[Charles Lepple]

On Fri, Aug 14, 2009 at 5:33 PM, Brian Wagener<cptanpanic at gmail.com> wrote:
> I just installed nut, and I it is detected but I don't get any usefull
> information.   I have the serial cable that came with it which is a
> 940-0024C and I tried setting that in the driver, but no difference.  What
> can I do to get stuff like battery voltage and such?
> Thanks,
> Brian
>
> upsc ups1 at localhost
> driver.name: apcsmart
> driver.parameter.cable: 940-0024C
> driver.parameter.pollinterval: 2
> driver.parameter.port: /dev/ttyS0
> driver.version: 2.2.1-
> driver.version.internal: 1.99.8

I would suggest upgrading to the latest source release (2.4.1, or even
the SVN trunk) if possible - a lot of tables are hardcoded in that
driver, and you may need to tweak the source code to get things right.

At the very least, check how your OS/distro is starting NUT (ps
auxwww|grep apcsmart) and re-run the command with a single "-D"
parameter. The resulting debug output should give us an idea as to how
it is detecting your UPS' capabilities.

-- 
- Charles Lepple