[Nut-upsuser] Windows MSI installer 2.6.1-1

[Charles Lepple]

[please keep the list CC'd. Thanks!]

On Oct 17, 2012, at 4:03 AM, Jörg Bous wrote:

> Hello Charles,
> 
> Longer time I had no chance to continue this topic, now i finally want to get it running.
> 
> I have downloaded and installed Windows MSI installer 2.6.5-3 on Windows Vista PC.
> below you will find the content of the CONF files which I created.

Hi Jörg,

I haven't used the Windows port of NUT - I was only providing links to the configuration information which is common between the original NUT source code and the Windows port. Hopefully someone else can help with the Windows questions.

> Then I go to NUT and press "start service"
> I shortly see a window popping up, but even do not see the content, and nothing happen then
> 
> My question is how to start NUT, where to see some feedback from software, any possibility to start graphical software?
> 
> 
> nut.conf
> 
> MODE=standalone
> 
> 
> ups.conf
> 
> [thisups]
> 	driver = blazer_usb
> 	port = auto
> 	desc = "PowerWalker VI 850 LCD"
> 	default.battery.voltage.high = 13.5
> 	default.battery.voltage.low = 10
> 
> 
> upsd.conf
> 
> LISTEN 127.0.0.1 3493
> 
> 
> upsd.users
> 
> [thisuser]
> 	password = administrator
> 	actions = set
> 	instcmds = all
> 	upsmon master
> 
> 
> upsmon.conf
> 
> MONITOR myups at localhost 1 thisuser administrator master
> MINSUPPLIES 1
> SHUTDOWNCMD "/sbin/shutdown -h +0"
> NOTIFYCMD /usr/local/sbin/upssched
> NOTIFYFLAG ONBATT    SYSLOG+EXEC
> NOTIFYFLAG ONLINE    SYSLOG+EXEC
> POLLFREQ 5
> POLLFREQALERT 5
> HOSTSYNC 15
> DEADTIME 15
> POWERDOWNFLAG /etc/killpower
> RBWARNTIME 43200
> NOCOMMWARNTIME 300
> FINALDELAY 5
> 
> 
> upssched.conf
> 
> MDSCRIPT /usr/local/bin/upssched-cmd
> PIPEFN /var/state/ups/upssched/upssched.pipe
> LOCKFN /var/state/ups/upssched/upssched.lock
> AT ONBATT * EXECUTE power-off
> AT ONBATT * START-TIMER power-still-off 30
> AT ONLINE * CANCEL-TIMER power-still-off
> AT ONLINE * EXECUTE power-on
> 
> 
> Best regards
> Jörg Bous
> 
> -----Ursprüngliche Nachricht-----
> Von: Charles Lepple [mailto:clepple at gmail.com] 
> Gesendet: Donnerstag, 5. Januar 2012 05:09
> An: Jörg Bous
> Cc: nut-upsuser Mailing List
> Betreff: Re: [Nut-upsuser] Windows MSI installer 2.6.1-1
> 
> On Jan 3, 2012, at 8:35 AM, Jörg Bous wrote:
> 
>> If possible I would like to use the PowerWalker Line-Interactive VI 1400 device which should work with blazer_usb
>> 
>> Does anyone have possibility to provide me the correct configuration for the files (ups.conf, upsd.{users,conf} and upsmon.conf) ?
>> It would be great if you could explain to me how to get NUT working
> 
> Have you had a chance to read the documentation that Arnaud pointed you to? This page walks you through basic to advanced configuration:
> 
> http://www.networkupstools.org/docs/user-manual.chunked/ar01s06.html
> 
> http://www.networkupstools.org/docs/man/ups.conf.html talks about ups.conf.
> 
> http://www.networkupstools.org/docs/man/blazer.html mentions options specific to blazer_usb.
> 
> When you say that you tried to configure NUT, what did you change, and what were the errors?
> 
> -- 
> Charles Lepple
> clepple at gmail
> 
> 
> 
> 
> 
> 

-- 
Charles Lepple
clepple at gmail