Bug#784693: exim4-config: Exim configuration error in line 852 of /var/lib/exim4/config.autogenerated.tmp
Damien Couroussé
damien.courousse at gmail.com
Thu May 7 20:12:11 UTC 2015
Package: exim4-config
Version: 4.84-8
Severity: important
hello,
The installation of exim4 fails as copied below.
Please also find attached the tmp file
/var/lib/exim4/config.autogenerated.tmp created during the installation
process.
regards,
root at puccini:~# LANG=C apt-get install exim4
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
bsd-mailx exim4-base exim4-config exim4-daemon-light
Suggested packages:
eximon4 exim4-doc-html exim4-doc-info spf-tools-perl swaks
Recommended packages:
mailx
The following NEW packages will be installed:
bsd-mailx exim4 exim4-base exim4-config exim4-daemon-light
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/2266 kB of archives.
After this operation, 6148 kB of additional disk space will be used.
Do you want to continue? [Y/n]
Preconfiguring packages ...
Selecting previously unselected package exim4-config.
(Reading database ... 209734 files and directories currently installed.)
Preparing to unpack .../exim4-config_4.84-8_all.deb ...
Unpacking exim4-config (4.84-8) ...
Selecting previously unselected package exim4-base.
Preparing to unpack .../exim4-base_4.84-8_amd64.deb ...
Unpacking exim4-base (4.84-8) ...
Selecting previously unselected package exim4-daemon-light.
Preparing to unpack .../exim4-daemon-light_4.84-8_amd64.deb ...
Unpacking exim4-daemon-light (4.84-8) ...
Selecting previously unselected package bsd-mailx.
Preparing to unpack .../bsd-mailx_8.1.2-0.20141216cvs-2_amd64.deb ...
Unpacking bsd-mailx (8.1.2-0.20141216cvs-2) ...
Selecting previously unselected package exim4.
Preparing to unpack .../archives/exim4_4.84-8_all.deb ...
Unpacking exim4 (4.84-8) ...
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for systemd (215-17) ...
Setting up exim4-config (4.84-8) ...
2015-05-07 22:03:43 Exim configuration error in line 852 of
/var/lib/exim4/config.autogenerated.tmp:
unknown rewrite flag character '"' (could be missing quotes round
replacement item)
2015-05-07 22:03:43 Exim configuration error in line 852 of
/var/lib/exim4/config.autogenerated.tmp:
unknown rewrite flag character '"' (could be missing quotes round
replacement item)
2015-05-07 22:03:43 Exim configuration error in line 852 of
/var/lib/exim4/config.autogenerated.tmp:
unknown rewrite flag character '"' (could be missing quotes round
replacement item)
exim: could not open panic log - aborting: see message(s) above
Invalid new configfile /var/lib/exim4/config.autogenerated.tmp, not
installing
/var/lib/exim4/config.autogenerated.tmp to
/var/lib/exim4/config.autogenerated
dpkg: error processing package exim4-config (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of exim4-base:
exim4-base depends on exim4-config (>= 4.82) | exim4-config-2; however:
Package exim4-config is not configured yet.
Package exim4-config-2 is not installed.
Package exim4-config which provides exim4-config-2 is not configured yet.
dpkg: error processing package exim4-base (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of exim4-daemon-light:
exim4-daemon-light depends on exim4-base (>= 4.84); however:
Package exim4-base is not configured yet.
dpkg: error processing package exim4-daemon-light (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of bsd-mailx:
bsd-mailx depends on default-mta | mail-transport-agent; however:
Package default-mta is not installed.
Package exim4-daemon-light which provides default-mta is not
configured yet.
Package mail-transport-agent is not installed.
Package exim4-daemon-light which provides mail-transport-agent is not
configured yet.
dpkg: error processing package bsd-mailx (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of exim4:
exim4 depends on exim4-base (>= 4.84-8); however:
Package exim4-base is not configured yet.
exim4 depends on exim4-base (<< 4.84-8.1); however:
Package exim4-base is not configured yet.
exim4 depends on exim4-daemon-light | exim4-daemon-heavy |
exim4-daemon-custom; however:
Package exim4-daemon-light is not configured yet.
Package exim4-daemon-heavy is not installed.
Package exim4-daemon-custom is not installed.
dpkg: error processing package exim4 (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
exim4-config
exim4-base
exim4-daemon-light
bsd-mailx
exim4
E: Sub-process /usr/bin/dpkg returned an error code (1)
-- Package-specific info:
Exim version 4.84 #3 built 17-Feb-2015 17:45:49
Copyright (c) University of Cambridge, 1995 - 2014
(c) The Exim Maintainers and contributors in ACKNOWLEDGMENTS file, 2007
- 2014
Berkeley DB: Berkeley DB 5.3.28: (September 9, 2013)
Support for: crypteq iconv() IPv6 GnuTLS move_frozen_messages DKIM PRDR OCSP
Lookups (built-in): lsearch wildlsearch nwildlsearch iplsearch cdb dbm
dbmjz dbmnz dnsdb dsearch nis nis0 passwd
Authenticators: cram_md5 plaintext
Routers: accept dnslookup ipliteral manualroute queryprogram redirect
Transports: appendfile/maildir/mailstore autoreply lmtp pipe smtp
Fixed never_users: 0
Size of off_t: 8
# /etc/exim4/update-exim4.conf.conf
#
# Edit this file and /etc/mailname by hand and execute update-exim4.conf
# yourself or use 'dpkg-reconfigure exim4-config'
#
# Please note that this is _not_ a dpkg-conffile and that automatic changes
# to this file might happen. The code handling this will honor your local
# changes, so this is usually fine, but will break local schemes that mess
# around with multiple versions of the file.
#
# update-exim4.conf uses this file to determine variable values to generate
# exim configuration macros for the configuration file.
#
# Most settings found in here do have corresponding questions in the
# Debconf configuration, but not all of them.
#
# This is a Debian specific file
dc_eximconfig_configtype='local'
dc_other_hostnames='# localhost.localdomain'
dc_local_interfaces='127.0.0.1 ; ::1'
dc_readhost=''
dc_relay_domains=''
dc_minimaldns='false'
dc_relay_nets=''
dc_smarthost=''
CFILEMODE='644'
dc_use_split_config='false'
dc_hide_mailname=''
dc_mailname_in_oh='true'
dc_localdelivery='mail_spool'
mailname:# localhost.localdomain
-- System Information:
Debian Release: 8.0
APT prefers stable
APT policy: (980, 'stable'), (500, 'stable-updates'), (350, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages exim4-config depends on:
ii adduser 3.113+nmu3
ii debconf [debconf-2.0] 1.5.56
exim4-config recommends no packages.
exim4-config suggests no packages.
-- Configuration Files:
/etc/exim4/passwd.client [Errno 13] Permission non accordée:
u'/etc/exim4/passwd.client'
-- debconf information:
exim4/dc_relay_nets:
exim4/exim4-config-title:
exim4/dc_smarthost:
exim4/dc_readhost:
exim4/dc_postmaster:
exim4/no_config: true
exim4/dc_other_hostnames: # localhost.localdomain
exim4/use_split_config: false
exim4/dc_relay_domains:
exim4/mailname: # localhost.localdomain
exim4/dc_eximconfig_configtype: local delivery only; not on a network
exim4/hide_mailname:
exim4/dc_minimaldns: false
exim4/dc_local_interfaces: 127.0.0.1 ; ::1
exim4/dc_localdelivery: mbox format in /var/mail/
-------------- next part --------------
#########
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# This file was generated dynamically from
# non-split config (/etc/exim4/exim4.conf.localmacros
# and /etc/exim4/exim4.conf.template).
# The config files are supplemented with package installation/configuration
# settings managed by debconf. This data is stored in
# /etc/exim4/update-exim4.conf.conf
# Any changes you make here will be lost.
# See /usr/share/doc/exim4-base/README.Debian.gz and update-exim4.conf(8)
# for instructions of customization.
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
#########
exim_path = /usr/sbin/exim4
.ifndef CONFDIR
CONFDIR = /etc/exim4
.endif
UPEX4CmacrosUPEX4C = 1
##############################################
# the following macro definitions were created
# dynamically by /usr/sbin/update-exim4.conf
.ifndef MAIN_LOCAL_INTERFACES
MAIN_LOCAL_INTERFACES=<; 127.0.0.1 ; ::1
.endif
.ifndef MAIN_PACKAGE_VERSION
MAIN_PACKAGE_VERSION=4.84-8
.endif
.ifndef MAIN_LOCAL_DOMAINS
MAIN_LOCAL_DOMAINS=@:localhost:# localhost.localdomain
.endif
.ifndef MAIN_RELAY_TO_DOMAINS
MAIN_RELAY_TO_DOMAINS=empty
.endif
.ifndef ETC_MAILNAME
ETC_MAILNAME=# localhost.localdomain
.endif
.ifndef LOCAL_DELIVERY
LOCAL_DELIVERY=mail_spool
.endif
.ifndef MAIN_RELAY_NETS
MAIN_RELAY_NETS=: 127.0.0.1 : ::::1
.endif
.ifndef DCreadhost
DCreadhost=empty
.endif
.ifndef DCsmarthost
DCsmarthost=empty
.endif
.ifndef DC_eximconfig_configtype
DC_eximconfig_configtype=local
.endif
.ifndef DCconfig_local
DCconfig_local=1
.endif
##############################################
domainlist local_domains = MAIN_LOCAL_DOMAINS
domainlist relay_to_domains = MAIN_RELAY_TO_DOMAINS
hostlist relay_from_hosts = MAIN_RELAY_NETS
.ifndef MAIN_PRIMARY_HOSTNAME_AS_QUALIFY_DOMAIN
.ifndef MAIN_QUALIFY_DOMAIN
qualify_domain = ETC_MAILNAME
.else
qualify_domain = MAIN_QUALIFY_DOMAIN
.endif
.endif
.ifdef MAIN_LOCAL_INTERFACES
local_interfaces = MAIN_LOCAL_INTERFACES
.endif
.ifndef LOCAL_DELIVERY
LOCAL_DELIVERY=mail_spool
.endif
gecos_pattern = ^([^,:]*)
gecos_name = $1
.ifndef CHECK_RCPT_LOCAL_LOCALPARTS
CHECK_RCPT_LOCAL_LOCALPARTS = ^[.] : ^.*[@%!/|`#&?]
.endif
.ifndef CHECK_RCPT_REMOTE_LOCALPARTS
CHECK_RCPT_REMOTE_LOCALPARTS = ^[./|] : ^.*[@%!`#&?] : ^.*/\\.\\./
.endif
.ifndef MAIN_LOG_SELECTOR
MAIN_LOG_SELECTOR = +tls_peerdn
.endif
.ifndef MAIN_ACL_CHECK_MAIL
MAIN_ACL_CHECK_MAIL = acl_check_mail
.endif
acl_smtp_mail = MAIN_ACL_CHECK_MAIL
.ifndef MAIN_ACL_CHECK_RCPT
MAIN_ACL_CHECK_RCPT = acl_check_rcpt
.endif
acl_smtp_rcpt = MAIN_ACL_CHECK_RCPT
.ifndef MAIN_ACL_CHECK_DATA
MAIN_ACL_CHECK_DATA = acl_check_data
.endif
acl_smtp_data = MAIN_ACL_CHECK_DATA
.ifdef MESSAGE_SIZE_LIMIT
message_size_limit = MESSAGE_SIZE_LIMIT
.endif
.ifdef MAIN_ALLOW_DOMAIN_LITERALS
allow_domain_literals
.endif
.ifndef DC_minimaldns
.ifndef MAIN_HOST_LOOKUP
MAIN_HOST_LOOKUP = *
.endif
host_lookup = MAIN_HOST_LOOKUP
.endif
.ifdef MAIN_HARDCODE_PRIMARY_HOSTNAME
primary_hostname = MAIN_HARDCODE_PRIMARY_HOSTNAME
.endif
.ifdef MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
smtp_accept_max_nonmail_hosts = MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
.endif
.ifndef MAIN_FORCE_SENDER
local_from_check = false
local_sender_retain = true
untrusted_set_sender = *
.endif
.ifndef MAIN_IGNORE_BOUNCE_ERRORS_AFTER
MAIN_IGNORE_BOUNCE_ERRORS_AFTER = 2d
.endif
ignore_bounce_errors_after = MAIN_IGNORE_BOUNCE_ERRORS_AFTER
.ifndef MAIN_TIMEOUT_FROZEN_AFTER
MAIN_TIMEOUT_FROZEN_AFTER = 7d
.endif
timeout_frozen_after = MAIN_TIMEOUT_FROZEN_AFTER
.ifndef MAIN_FREEZE_TELL
MAIN_FREEZE_TELL = postmaster
.endif
freeze_tell = MAIN_FREEZE_TELL
.ifndef SPOOLDIR
SPOOLDIR = /var/spool/exim4
.endif
spool_directory = SPOOLDIR
.ifndef MAIN_TRUSTED_USERS
MAIN_TRUSTED_USERS = uucp
.endif
trusted_users = MAIN_TRUSTED_USERS
.ifdef MAIN_TRUSTED_GROUPS
trusted_groups = MAIN_TRUSTED_GROUPS
.endif
.ifdef MAIN_TLS_ENABLE
.ifndef MAIN_TLS_ADVERTISE_HOSTS
MAIN_TLS_ADVERTISE_HOSTS = *
.endif
tls_advertise_hosts = MAIN_TLS_ADVERTISE_HOSTS
.ifdef MAIN_TLS_CERTKEY
tls_certificate = MAIN_TLS_CERTKEY
.else
.ifndef MAIN_TLS_CERTIFICATE
MAIN_TLS_CERTIFICATE = CONFDIR/exim.crt
.endif
tls_certificate = MAIN_TLS_CERTIFICATE
.ifndef MAIN_TLS_PRIVATEKEY
MAIN_TLS_PRIVATEKEY = CONFDIR/exim.key
.endif
tls_privatekey = MAIN_TLS_PRIVATEKEY
.endif
.ifndef MAIN_TLS_VERIFY_CERTIFICATES
MAIN_TLS_VERIFY_CERTIFICATES = ${if exists{/etc/ssl/certs/ca-certificates.crt}\
{/etc/ssl/certs/ca-certificates.crt}\
{/dev/null}}
.endif
tls_verify_certificates = MAIN_TLS_VERIFY_CERTIFICATES
.ifdef MAIN_TLS_VERIFY_HOSTS
tls_verify_hosts = MAIN_TLS_VERIFY_HOSTS
.endif
.ifdef MAIN_TLS_TRY_VERIFY_HOSTS
tls_try_verify_hosts = MAIN_TLS_TRY_VERIFY_HOSTS
.endif
.endif
.ifdef MAIN_LOG_SELECTOR
log_selector = MAIN_LOG_SELECTOR
.endif
begin acl
acl_local_deny_exceptions:
accept
hosts = ${if exists{CONFDIR/host_local_deny_exceptions}\
{CONFDIR/host_local_deny_exceptions}\
{}}
accept
senders = ${if exists{CONFDIR/sender_local_deny_exceptions}\
{CONFDIR/sender_local_deny_exceptions}\
{}}
accept
hosts = ${if exists{CONFDIR/local_host_whitelist}\
{CONFDIR/local_host_whitelist}\
{}}
accept
senders = ${if exists{CONFDIR/local_sender_whitelist}\
{CONFDIR/local_sender_whitelist}\
{}}
.ifdef LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE
.include LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE
.endif
.ifdef WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE
.include WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE
.endif
acl_check_mail:
.ifdef CHECK_MAIL_HELO_ISSUED
deny
message = no HELO given before MAIL command
condition = ${if def:sender_helo_name {no}{yes}}
.endif
accept
acl_check_rcpt:
accept
hosts = :
control = dkim_disable_verify
.ifdef DC_minimaldns
warn
control = dkim_disable_verify
.else
.ifdef DISABLE_DKIM_VERIFY
warn
control = dkim_disable_verify
.endif
.endif
.ifdef CHECK_RCPT_LOCAL_LOCALPARTS
deny
domains = +local_domains
local_parts = CHECK_RCPT_LOCAL_LOCALPARTS
message = restricted characters in address
.endif
.ifdef CHECK_RCPT_REMOTE_LOCALPARTS
deny
domains = !+local_domains
local_parts = CHECK_RCPT_REMOTE_LOCALPARTS
message = restricted characters in address
.endif
accept
.ifndef CHECK_RCPT_POSTMASTER
local_parts = postmaster
.else
local_parts = CHECK_RCPT_POSTMASTER
.endif
domains = +local_domains : +relay_to_domains
.ifdef CHECK_RCPT_VERIFY_SENDER
deny
message = Sender verification failed
!acl = acl_local_deny_exceptions
!verify = sender
.endif
deny
!acl = acl_local_deny_exceptions
senders = ${if exists{CONFDIR/local_sender_callout}\
{CONFDIR/local_sender_callout}\
{}}
!verify = sender/callout
accept
hosts = +relay_from_hosts
control = submission/sender_retain
control = dkim_disable_verify
accept
authenticated = *
control = submission/sender_retain
control = dkim_disable_verify
require
message = relay not permitted
domains = +local_domains : +relay_to_domains
require
verify = recipient
deny
!acl = acl_local_deny_exceptions
recipients = ${if exists{CONFDIR/local_rcpt_callout}\
{CONFDIR/local_rcpt_callout}\
{}}
!verify = recipient/callout
deny
message = sender envelope address $sender_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster
!acl = acl_local_deny_exceptions
senders = ${if exists{CONFDIR/local_sender_blacklist}\
{CONFDIR/local_sender_blacklist}\
{}}
deny
message = sender IP address $sender_host_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster
!acl = acl_local_deny_exceptions
hosts = ${if exists{CONFDIR/local_host_blacklist}\
{CONFDIR/local_host_blacklist}\
{}}
.ifdef CHECK_RCPT_REVERSE_DNS
warn
condition = ${if and{{def:sender_host_address}{!def:sender_host_name}}\
{yes}{no}}
add_header = X-Host-Lookup-Failed: Reverse DNS lookup failed for $sender_host_address (${if eq{$host_lookup_failed}{1}{failed}{deferred}})
.endif
.ifdef CHECK_RCPT_SPF
deny
message = [SPF] $sender_host_address is not allowed to send mail from \
${if def:sender_address_domain {$sender_address_domain}{$sender_helo_name}}. \
Please see \
http://www.openspf.org/Why?scope=${if def:sender_address_domain \
{mfrom}{helo}};identity=${if def:sender_address_domain \
{$sender_address}{$sender_helo_name}};ip=$sender_host_address
log_message = SPF check failed.
!acl = acl_local_deny_exceptions
condition = ${run{/usr/bin/spfquery.mail-spf-perl --ip \
${quote:$sender_host_address} --identity \
${if def:sender_address_domain \
{--scope mfrom --identity ${quote:$sender_address}}\
{--scope helo --identity ${quote:$sender_helo_name}}}}\
{no}{${if eq {$runrc}{1}{yes}{no}}}}
defer
message = Temporary DNS error while checking SPF record. Try again later.
!acl = acl_local_deny_exceptions
condition = ${if eq {$runrc}{5}{yes}{no}}
warn
condition = ${if <={$runrc}{6}{yes}{no}}
add_header = Received-SPF: ${if eq {$runrc}{0}{pass}\
{${if eq {$runrc}{2}{softfail}\
{${if eq {$runrc}{3}{neutral}\
{${if eq {$runrc}{4}{permerror}\
{${if eq {$runrc}{6}{none}{error}}}}}}}}}\
} client-ip=$sender_host_address; \
${if def:sender_address_domain \
{envelope-from=${sender_address}; }{}}\
helo=$sender_helo_name
warn
log_message = Unexpected error in SPF check.
condition = ${if >{$runrc}{6}{yes}{no}}
.endif
.ifdef CHECK_RCPT_IP_DNSBLS
warn
dnslists = CHECK_RCPT_IP_DNSBLS
add_header = X-Warning: $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
log_message = $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
.endif
.ifdef CHECK_RCPT_DOMAIN_DNSBLS
warn
!senders = ${if exists{CONFDIR/local_domain_dnsbl_whitelist}\
{CONFDIR/local_domain_dnsbl_whitelist}\
{}}
dnslists = CHECK_RCPT_DOMAIN_DNSBLS
add_header = X-Warning: $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
log_message = $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
.endif
.ifdef CHECK_RCPT_LOCAL_ACL_FILE
.include CHECK_RCPT_LOCAL_ACL_FILE
.endif
accept
domains = +relay_to_domains
endpass
verify = recipient
accept
acl_check_data:
.ifdef CHECK_DATA_VERIFY_HEADER_SYNTAX
deny
message = Message headers fail syntax check
!acl = acl_local_deny_exceptions
!verify = header_syntax
.endif
.ifdef CHECK_DATA_VERIFY_HEADER_SENDER
deny
message = No verifiable sender address in message headers
!acl = acl_local_deny_exceptions
!verify = header_sender
.endif
.ifdef CHECK_DATA_LOCAL_ACL_FILE
.include CHECK_DATA_LOCAL_ACL_FILE
.endif
accept
begin routers
.ifdef MAIN_ALLOW_DOMAIN_LITERALS
domain_literal:
debug_print = "R: domain_literal for $local_part@$domain"
driver = ipliteral
domains = ! +local_domains
transport = remote_smtp
.endif
hubbed_hosts:
debug_print = "R: hubbed_hosts for $domain"
driver = manualroute
domains = "${if exists{CONFDIR/hubbed_hosts}\
{partial-lsearch;CONFDIR/hubbed_hosts}\
fail}"
same_domain_copy_routing = yes
route_data = ${lookup{$domain}partial-lsearch{CONFDIR/hubbed_hosts}}
transport = remote_smtp
.ifdef DCconfig_internet
dnslookup_relay_to_domains:
debug_print = "R: dnslookup_relay_to_domains for $local_part@$domain"
driver = dnslookup
domains = ! +local_domains : +relay_to_domains
transport = remote_smtp
same_domain_copy_routing = yes
no_more
dnslookup:
debug_print = "R: dnslookup for $local_part@$domain"
driver = dnslookup
domains = ! +local_domains
transport = remote_smtp
same_domain_copy_routing = yes
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 192.168.0.0/16 :\
172.16.0.0/12 : 10.0.0.0/8 : 169.254.0.0/16 :\
255.255.255.255
no_more
.endif
.ifdef DCconfig_local
nonlocal:
debug_print = "R: nonlocal for $local_part@$domain"
driver = redirect
domains = ! +local_domains
allow_fail
data = :fail: Mailing to remote domains not supported
no_more
.endif
.ifdef DCconfig_smarthost DCconfig_satellite
smarthost:
debug_print = "R: smarthost for $local_part@$domain"
driver = manualroute
domains = ! +local_domains
transport = remote_smtp_smarthost
route_list = * DCsmarthost byname
host_find_failed = ignore
same_domain_copy_routing = yes
no_more
.endif
COND_LOCAL_SUBMITTER = "\
${if match_ip{$sender_host_address}{:@[]}\
{1}{0}\
}"
real_local:
debug_print = "R: real_local for $local_part@$domain"
driver = accept
domains = +local_domains
condition = COND_LOCAL_SUBMITTER
local_part_prefix = real-
check_local_user
transport = LOCAL_DELIVERY
system_aliases:
debug_print = "R: system_aliases for $local_part@$domain"
driver = redirect
domains = +local_domains
allow_fail
allow_defer
data = ${lookup{$local_part}lsearch{/etc/aliases}}
.ifdef SYSTEM_ALIASES_USER
user = SYSTEM_ALIASES_USER
.endif
.ifdef SYSTEM_ALIASES_GROUP
group = SYSTEM_ALIASES_GROUP
.endif
.ifdef SYSTEM_ALIASES_FILE_TRANSPORT
file_transport = SYSTEM_ALIASES_FILE_TRANSPORT
.endif
.ifdef SYSTEM_ALIASES_PIPE_TRANSPORT
pipe_transport = SYSTEM_ALIASES_PIPE_TRANSPORT
.endif
.ifdef SYSTEM_ALIASES_DIRECTORY_TRANSPORT
directory_transport = SYSTEM_ALIASES_DIRECTORY_TRANSPORT
.endif
.ifdef DCconfig_satellite
hub_user:
debug_print = "R: hub_user for $local_part@$domain"
driver = redirect
domains = +local_domains
data = ${local_part}@DCreadhost
check_local_user
hub_user_smarthost:
debug_print = "R: hub_user_smarthost for $local_part@$domain"
driver = manualroute
domains = DCreadhost
transport = remote_smtp_smarthost
route_list = * DCsmarthost byname
host_find_failed = ignore
same_domain_copy_routing = yes
check_local_user
.endif
userforward:
debug_print = "R: userforward for $local_part@$domain"
driver = redirect
domains = +local_domains
check_local_user
file = $home/.forward
require_files = $local_part:$home/.forward
no_verify
no_expn
check_ancestor
allow_filter
forbid_smtp_code = true
directory_transport = address_directory
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
skip_syntax_errors
syntax_errors_to = real-$local_part@$domain
syntax_errors_text = \
This is an automatically generated message. An error has\n\
been found in your .forward file. Details of the error are\n\
reported below. While this error persists, you will receive\n\
a copy of this message for every message that is addressed\n\
to you. If your .forward file is a filter file, or if it is\n\
a non-filter file containing no valid forwarding addresses,\n\
a copy of each incoming message will be put in your normal\n\
mailbox. If a non-filter file contains at least one valid\n\
forwarding address, forwarding to the valid addresses will\n\
happen, and those will be the only deliveries that occur.
procmail:
debug_print = "R: procmail for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
transport = procmail_pipe
require_files = ${local_part}:\
${if exists{/etc/procmailrc}\
{/etc/procmailrc}{${home}/.procmailrc}}:\
+/usr/bin/procmail
no_verify
no_expn
maildrop:
debug_print = "R: maildrop for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
transport = maildrop_pipe
require_files = ${local_part}:${home}/.mailfilter:+/usr/bin/maildrop
no_verify
no_expn
.ifndef FIRST_USER_ACCOUNT_UID
FIRST_USER_ACCOUNT_UID = 0
.endif
.ifndef DEFAULT_SYSTEM_ACCOUNT_ALIAS
DEFAULT_SYSTEM_ACCOUNT_ALIAS = :fail: no mail to system accounts
.endif
COND_SYSTEM_USER_AND_REMOTE_SUBMITTER = "\
${if and{{! match_ip{$sender_host_address}{:@[]}}\
{<{$local_user_uid}{FIRST_USER_ACCOUNT_UID}}}\
{1}{0}\
}"
lowuid_aliases:
debug_print = "R: lowuid_aliases for $local_part@$domain (UID $local_user_uid)"
check_local_user
driver = redirect
allow_fail
domains = +local_domains
condition = COND_SYSTEM_USER_AND_REMOTE_SUBMITTER
data = ${if exists{CONFDIR/lowuid-aliases}\
{${lookup{$local_part}lsearch{CONFDIR/lowuid-aliases}\
{$value}{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}}\
{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}
local_user:
debug_print = "R: local_user for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
local_parts = ! root
transport = LOCAL_DELIVERY
cannot_route_message = Unknown user
mail4root:
debug_print = "R: mail4root for $local_part@$domain"
driver = redirect
domains = +local_domains
data = /var/mail/mail
file_transport = address_file
local_parts = root
user = mail
group = mail
begin transports
.ifdef HIDE_MAILNAME
REMOTE_SMTP_HEADERS_REWRITE=*@+local_domains $1 at DCreadhost frs : *@ETC_MAILNAME $1 at DCreadhost frs
REMOTE_SMTP_RETURN_PATH=${if match_domain{$sender_address_domain}{+local_domains}{${sender_address_local_part}@DCreadhost}{${if match_domain{$sender_address_domain}{ETC_MAILNAME}{${sender_address_local_part}@DCreadhost}fail}}}
.endif
.ifdef REMOTE_SMTP_HELO_FROM_DNS
.ifdef REMOTE_SMTP_HELO_DATA
REMOTE_SMTP_HELO_DATA==${lookup dnsdb {ptr=$sending_ip_address}{$value}{$primary_hostname}}
.else
REMOTE_SMTP_HELO_DATA=${lookup dnsdb {ptr=$sending_ip_address}{$value}{$primary_hostname}}
.endif
.endif
address_file:
debug_print = "T: address_file for $local_part@$domain"
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
address_pipe:
debug_print = "T: address_pipe for $local_part@$domain"
driver = pipe
return_fail_output
address_reply:
debug_print = "T: autoreply for $local_part@$domain"
driver = autoreply
mail_spool:
debug_print = "T: appendfile for $local_part@$domain"
driver = appendfile
file = /var/mail/$local_part
delivery_date_add
envelope_to_add
return_path_add
group = mail
mode = 0660
mode_fail_narrower = false
maildir_home:
debug_print = "T: maildir_home for $local_part@$domain"
driver = appendfile
.ifdef MAILDIR_HOME_MAILDIR_LOCATION
directory = MAILDIR_HOME_MAILDIR_LOCATION
.else
directory = $home/Maildir
.endif
.ifdef MAILDIR_HOME_CREATE_DIRECTORY
create_directory
.endif
.ifdef MAILDIR_HOME_CREATE_FILE
create_file = MAILDIR_HOME_CREATE_FILE
.endif
delivery_date_add
envelope_to_add
return_path_add
maildir_format
.ifdef MAILDIR_HOME_DIRECTORY_MODE
directory_mode = MAILDIR_HOME_DIRECTORY_MODE
.else
directory_mode = 0700
.endif
.ifdef MAILDIR_HOME_MODE
mode = MAILDIR_HOME_MODE
.else
mode = 0600
.endif
mode_fail_narrower = false
maildrop_pipe:
debug_print = "T: maildrop_pipe for $local_part@$domain"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/maildrop"
message_prefix =
message_suffix =
return_path_add
delivery_date_add
envelope_to_add
procmail_pipe:
debug_print = "T: procmail_pipe for $local_part@$domain"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/procmail"
return_path_add
delivery_date_add
envelope_to_add
remote_smtp:
debug_print = "T: remote_smtp for $local_part@$domain"
driver = smtp
.ifdef REMOTE_SMTP_HOSTS_AVOID_TLS
hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS
.endif
.ifdef REMOTE_SMTP_HEADERS_REWRITE
headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
.endif
.ifdef REMOTE_SMTP_RETURN_PATH
return_path = REMOTE_SMTP_RETURN_PATH
.endif
.ifdef REMOTE_SMTP_HELO_DATA
helo_data=REMOTE_SMTP_HELO_DATA
.endif
.ifdef DKIM_DOMAIN
dkim_domain = DKIM_DOMAIN
.endif
.ifdef DKIM_SELECTOR
dkim_selector = DKIM_SELECTOR
.endif
.ifdef DKIM_PRIVATE_KEY
dkim_private_key = DKIM_PRIVATE_KEY
.endif
.ifdef DKIM_CANON
dkim_canon = DKIM_CANON
.endif
.ifdef DKIM_STRICT
dkim_strict = DKIM_STRICT
.endif
.ifdef DKIM_SIGN_HEADERS
dkim_sign_headers = DKIM_SIGN_HEADERS
.endif
.ifdef TLS_DH_MIN_BITS
tls_dh_min_bits = TLS_DH_MIN_BITS
.endif
.ifdef REMOTE_SMTP_TLS_CERTIFICATE
tls_certificate = REMOTE_SMTP_TLS_CERTIFICATE
.endif
.ifdef REMOTE_SMTP_PRIVATEKEY
tls_privatekey = REMOTE_SMTP_PRIVATEKEY
.endif
remote_smtp_smarthost:
debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
driver = smtp
hosts_try_auth = <; ${if exists{CONFDIR/passwd.client} \
{\
${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$host_address}}\
}\
{} \
}
.ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
.endif
.ifdef REMOTE_SMTP_HEADERS_REWRITE
headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
.endif
.ifdef REMOTE_SMTP_RETURN_PATH
return_path = REMOTE_SMTP_RETURN_PATH
.endif
.ifdef REMOTE_SMTP_HELO_DATA
helo_data=REMOTE_SMTP_HELO_DATA
.endif
.ifdef TLS_DH_MIN_BITS
tls_dh_min_bits = TLS_DH_MIN_BITS
.endif
.ifdef REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
tls_certificate = REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
.endif
.ifdef REMOTE_SMTP_SMARTHOST_PRIVATEKEY
tls_privatekey = REMOTE_SMTP_SMARTHOST_PRIVATEKEY
.endif
address_directory:
debug_print = "T: address_directory for $local_part@$domain"
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
check_string = ""
escape_string = ""
maildir_format
begin retry
* * F,2h,15m; G,16h,1h,1.5; F,4d,6h
begin rewrite
.ifndef NO_EAA_REWRITE_REWRITE
*@+local_domains "${lookup{${local_part}}lsearch{/etc/email-addresses}\
{$value}fail}" Ffrs
*@ETC_MAILNAME "${lookup{${local_part}}lsearch{/etc/email-addresses}\
{$value}fail}" Ffrs
.endif
begin authenticators
cram_md5:
driver = cram_md5
public_name = CRAM-MD5
client_name = ${extract{1}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}}
client_secret = ${extract{2}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}}
PASSWDLINE=${sg{\
${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}\
}\
{\\N[\\^]\\N}\
{^^}\
}
plain:
driver = plaintext
public_name = PLAIN
.ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS
client_send = "<; ${if !eq{$tls_out_cipher}{}\
{^${extract{1}{:}{PASSWDLINE}}\
^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}\
}fail}"
.else
client_send = "<; ^${extract{1}{:}{PASSWDLINE}}\
^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
.endif
login:
driver = plaintext
public_name = LOGIN
.ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS
client_send = "<; ${if and{\
{!eq{$tls_out_cipher}{}}\
{!eq{PASSWDLINE}{}}\
}\
{}fail}\
; ${extract{1}{::}{PASSWDLINE}}\
; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
.else
client_send = "<; ${if !eq{PASSWDLINE}{}\
{}fail}\
; ${extract{1}{::}{PASSWDLINE}}\
; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
.endif
More information about the Pkg-exim4-maintainers
mailing list