Bug#808460: pulseaudio: In case of connection of a microphone to a frontal panel, the interlocutor doesn't hear me. In order that he heard me, it is necessary to come into settings and to select a frontal panel. After reset of the PC it is necessary to repeat procedure.

Ildar ildar.rt16 at gmail.com
Sun Dec 20 10:54:28 UTC 2015


Package: pulseaudio
Version: 5.0-13
Severity: normal

Initially the microphone generally wasn't defined. Daley I set sudo apt-get
install pavucontrol then I manually set up the input equipment a frontal
microphone. The interlocutor hears me. After reset of the PC of setup don't
remain and I again set up pulseaudio



-- Package-specific info:
File '/etc/default/pulseaudio' does not exist


-- System Information:
Debian Release: 8.2
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages pulseaudio depends on:
ii  adduser                       3.113+nmu3
ii  libasound2                    1.0.28-1
ii  libasound2-plugins            1.0.28-1+b1
ii  libc6                         2.19-18+deb8u1
ii  libcap2                       1:2.24-8
ii  libdbus-1-3                   1.8.20-0+deb8u1
ii  libfftw3-single3              3.3.4-2
ii  libgcc1                       1:4.9.2-10
ii  libice6                       2:1.0.9-1+b1
ii  libltdl7                      2.4.2-1.11
ii  liborc-0.4-0                  1:0.4.22-1
ii  libpulse0                     5.0-13
ii  libsamplerate0                0.1.8-8
ii  libsm6                        2:1.2.2-1+b1
ii  libsndfile1                   1.0.25-9.1
ii  libspeexdsp1                  1.2~rc1.2-1
ii  libstdc++6                    4.9.2-10
ii  libsystemd0                   215-17+deb8u2
ii  libtdb1                       1.3.1-1
ii  libudev1                      215-17+deb8u2
ii  libwebrtc-audio-processing-0  0.1-3
ii  libx11-6                      2:1.6.2-3
ii  libx11-xcb1                   2:1.6.2-3
ii  libxcb1                       1.10-3+b1
ii  libxtst6                      2:1.2.2-1+b1
ii  lsb-base                      4.1+Debian13+nmu1
ii  pulseaudio-utils              5.0-13
ii  udev                          215-17+deb8u2

Versions of packages pulseaudio recommends:
ii  pulseaudio-module-x11  5.0-13
ii  rtkit                  0.11-2

Versions of packages pulseaudio suggests:
pn  paman        <none>
pn  paprefs      <none>
ii  pavucontrol  2.0-3
pn  pavumeter    <none>

-- no debconf information
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.

## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; default-sink =
; default-source =
; default-server =
; default-dbus-server =

; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog

; cookie-file =

; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB

; auto-connect-localhost = no
; auto-connect-display = no
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.

## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no

; high-priority = yes
; nice-level = -11

; realtime-scheduling = yes
; realtime-priority = 5

; exit-idle-time = 20
; scache-idle-time = 20

; dl-search-path = (depends on architecture)

; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa

; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0

# resample-method defaults to  speex-float-1 on most architectures,
# speex-fixed-1 on ARM
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no

; flat-volumes = yes

; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000

; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right

; default-fragments = 4
; default-fragment-size-msec = 25

; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

..nofail

### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav

..fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
..endif

### Automatically connect sink and source if JACK server is present
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect channels=2
..fail
..endif

### Automatically load driver modules for Bluetooth hardware
..ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
..endif

..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif

### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
..ifexists module-console-kit.so
load-module module-console-kit
..endif
..ifexists module-systemd-login.so
load-module module-systemd-login
..endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.

### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system

### Register ourselves in the X11 session manager
#load-module module-x11-xsmp

### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif

### Make some devices default
#set-default-sink output
#set-default-source input
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

# This startup script is used only if PulseAudio is started in system
# mode.

### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
..endif

### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix

### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### Enable positioned event sounds
load-module module-position-event-sounds
-------------- next part --------------
Failed to create secure directory (/run/user/1000/pulse): Permission denied
Failed to create secure directory (/run/user/1000/pulse): Permission denied
null
    Discard all samples (playback) or generate zero samples (capture)
pulse
    PulseAudio Sound Server
hdmi:CARD=HDMI,DEV=0
    HDA Intel HDMI, HDMI 0
    HDMI Audio Output
dmix:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct sample snooping device
hw:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Hardware device with all software conversions
default:CARD=PCH
    HDA Intel PCH, ALC887-VD Analog
    Default Audio Device
sysdefault:CARD=PCH
    HDA Intel PCH, ALC887-VD Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    Front speakers
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Digital
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    Direct sample mixing device
dmix:CARD=PCH,DEV=1
    HDA Intel PCH, ALC887-VD Digital
    Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    Direct sample snooping device
dsnoop:CARD=PCH,DEV=1
    HDA Intel PCH, ALC887-VD Digital
    Direct sample snooping device
hw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    Direct hardware device without any conversions
hw:CARD=PCH,DEV=1
    HDA Intel PCH, ALC887-VD Digital
    Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    Hardware device with all software conversions
plughw:CARD=PCH,DEV=1
    HDA Intel PCH, ALC887-VD Digital
    Hardware device with all software conversions
-------------- next part --------------
Failed to create secure directory (/run/user/1000/pulse): Permission denied
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
-------------- next part --------------
Failed to create secure directory (/run/user/1000/pulse): Permission denied
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
-------------- next part --------------
Failed to create secure directory (/run/user/1000/pulse): Permission denied
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
-------------- next part --------------
Failed to create secure directory (/run/user/1000/pulse): Permission denied
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
-------------- next part --------------
Failed to create secure directory (/run/user/1000/pulse): Permission denied
Connection failure: Connection refused
pa_context_connect() failed: Connection refused


More information about the pkg-pulseaudio-devel mailing list