[sane-devel] sane-find-scanner works but scanimage does not find a scanner

[Jim Newton]

hi wolfgang, i was indeed able to get the scanner working yesterday.
although it no longer works today.  In the directory /usr/lib/sane
had contained lots of links to 1.0.5 files.  but the 1.0.5 files did
not exists,  since the 1.0.7 files did exist, i removed the invalid
symbolic links and replaced them with valid 1.0.7 links.   after that
the scanner worked.

the snapscan e40 does not have a power button.  the only way i can
turn it off, is to unplug it.  when i try to run xsane, xsane cannot
figure out if the scanner is warming up, or disconnected.  i suspect
that is the problem now... but i have no idea how to solve it.

what i saw was it worked until i went to bed last night.  but this
morning when i woke up i get the following errors from scanimage.


[jimka@localhost ~]$ scanimage -L
[sanei_debug] Setting debug level of snapscan to 255.
[snapscan] sane_snapscan_init
[snapscan] sane_snapscan_init: Snapscan backend version 1.4.7
[snapscan] add_device(/dev/usb/scanner0)
[snapscan] add_device: Detected (kind of) an USB device
[snapscan] snapscani_usb_open(/dev/usb/scanner0)
[snapscan] add_device: error opening device /dev/usb/scanner0: Invalid
argument
[snapscan] add_device(usb 0x06bd 0x208d)
[snapscan] add_device: Detected (kind of) an USB device
[snapscan] snapscani_usb_open(0x06bd 0x208d)
[snapscan] add_device: error opening device 0x06bd 0x208d: Invalid
argument
[snapscan] sane_snapscan_get_devices (0xbffff198, 0)

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[snapscan] sane_snapscan_exit
[jimka@localhost ~]$ 



Wolfgang Rapp wrote:
> 
> Sylvain Petreolle schrieb:
> >
> > I 've only these two lines in my snapscan.conf :
> > (I've not updated the file for months though I have
> > the last CVS code)
> >
> > /dev/usb/scanner0
> > firmware /mnt/hda/windows/system/snape20.bin
> >
> For me I also have a similar snapscan.conf entry like above.
> What kernel do you run and witch sane version.
> Please also check that the dev scanner0 is present with MAJOR-Nr 180 and
> MINOR-Nr 48
> this is not always created automaticly in all distributions.
> Also the driver module scanner.o must be loaded for USB-scanners.
> All this run on RedHat 6.0 with kernel version 2.2.19 and sane 1.0.7
> 
> Bye Wolfgang
> 
>   --- Jim Newton <jimka@rdrop.com> a écrit : > do i
> > need to be using /etc/sane.d or
> > > /usr/local/etc/sane.d
> > >
> > > in response to your email, i've created
> > > /usr/local/etc/sane.d
> > > which did not previously exist.  i've made it a link
> > > to /etc/sane.d
> > >
> > > I've downloaded the Snape40.bin into my home
> > > directory, because
> > > i do not have any microsoft window installed on my
> > > computer.
> > >
> > > can you have a look at my snapscan.conf and compare
> > > it to yours.
> > > can you tell me if you see any significant
> > > difference????
> > >
> > > -jim> #------------------------------ General
> > > -----------------------------------
> > >
> > > # Change to the fully qualified filename of your
> > > firmware file, if
> > > # firmware upload is needed by the scanner
> > > firmware /home/jimka/Snape40.bin
> > >
> > > # If not automatically found you may manually
> > > specify a device name.
> > >
> > > # For USB scanners also specify bus=usb, e.g.
> > > /dev/usb/scanner0 bus=usb
> > >
> > > # For SCSI scanners specify the generic device, e.g.
> > > /dev/sg0 on Linux.
> > > # /dev/sg0
> > >
> > >
> > #---------------------------------------------------------------------------
> > > # No changes should be necessary below this line
> > >
> > #---------------------------------------------------------------------------
> > >
> > > #-------------------------- SCSI scanners
> > > ----------------------------------
> > > # These SCSI devices will be probed automatically
> > > scsi AGFA * Scanner
> > > scsi COLOR * Scanner
> > > scsi Color * Scanner
> > > scsi ACERPERI * Scanner
> > >
> > > #--------------------------- USB scanners
> > > -----------------------------------
> > > # These USB devices will be probed automatically
> > > # (This will currently work only on Linux)
> > >
> > > # Acer 620U / 620UT
> > > usb 0x04a5 0x2040
> > > # Acer 640U
> > > usb 0x04a5 0x2060
> > > # Acer 640BU
> > > usb 0x04a5 0x207e
> > > # Acer 1240U
> > > usb 0x04a5 0x20c0
> > > # Acer 3300 / 4300
> > > usb 0x04a5 0x20b0
> > > # Acer 4300
> > > usb 0x04a5 0x20de
> > > # Agfa 1236U
> > > usb 0x06bd 0x0002
> > > # Agfa 1212U
> > > usb 0x06bd 0x0001
> > > usb 0x06bd 0x2061
> > > # Agfa Snapscan e20
> > > usb 0x06bd 0x2091
> > > # Agfa Snapscan e25
> > > usb 0x06bd 0x2095
> > > # Agfa Snapscan e26
> > > usb 0x06bd 0x2097
> > > # Agfa Snapscan e40
> > > usb 0x06bd 0x208d
> > > # Agfa Snapscan e42
> > > usb 0x06bd 0x20ff
> > > # Agfa Snapscan e50
> > > usb 0x06bd 0x208f
> > > # Agfa Snapscan e52
> > > usb 0x06bd 0x20fd
> > >
> > >
> >
> > ___________________________________________________________
> > Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français !
> > Yahoo! Mail : http://fr.mail.yahoo.com
> > _______________________________________________
> > Sane-devel mailing list
> > Sane-devel@www.mostang.com
> > http://www.mostang.com/mailman/listinfo/sane-devel