[sane-devel] SCSI Scanner attached to USB Port via Microtech
Thu, 17 Oct 2002 01:10:45 -0400
Mark Bucciarelli wrote:
>I have a HP ScanJet 5p scanner that is connected to a USB port via a Microtech
>USB/SCSI cable. I can't figure out how to configure Sane so this will work
>and I would appreciate any guidance or pointers this list can offer.
>sane-find-scanner sees it. The Microtech device shows up in the usb devices
>file. The HP scanner shows up in the scsi devices file. But scanimage can't see it.
>No scanners were identified.
>#scanimage -d "hp:/dev/scanner"
>scanimage: open of device hp:/dev/scanner failed: Error during device I/O
>sane-find-scanner: found SCSI processor "HP C5110A 3701" at device
>sane-find-scanner: found SCSI processor "HP C5110A 3701" at device /dev/sg0
>sane-find-scanner: found SCSI processor "HP C5110A 3701" at device /dev/sga
>Host: scsi0 Channel: 00 Id: 05 Lun: 00
> Vendor: HP Model: C5110A Rev: 3701
> Type: Processor ANSI SCSI revision: 02
>Host: scsi1 Channel: 00 Id: 00 Lun: 00
> Vendor: TEAC Model: CD-W224E Rev: L.0C
> Type: CD-ROM ANSI SCSI revision: 02
>scsi HP C5110A Processor 0 00 05 00
>P: Vendor=07af ProdID=0005 Rev= 1.00
>S: Manufacturer=Microtech International, Inc.
>I'm running RedHat 8.0, which includes scanimage 1.0.8. Thank you.
I don't know how the SCSI->USB cable works.
Maybe there is documentation on the web site.
What does your /etc/sane.d/hp.conf file say?
Create the /dev/scanner link youself.
Find out which SCSI device is your scanner.
I'm sure the SANE docs say to create that device.