[sane-devel] mustek 1200CP+ scanner hangs

[transnet @ gmx. de]

Hallo,
I try to install a mustek 1200CP+ scanner on debian/sarge without
success with a 2.6.9 and a 2.6.11 kernel.
This is what is written in the confs:
/etc/sane.d/mustek_pp.conf: 
  scanner mustek-cis1200+ * cis1200+
   
/etc/sane.d/dll.conf:
  mustek
  mustek_pp

The rest is commented.
scanimage hangs with both kernels.
It seems that 
http://lists.alioth.debian.org/pipermail/sane-devel/2005-February/013228.html
had already the same problem.

       Thanks in advance
       Thomas Feldburg

$ export SANE_DEBUG_MUSTEK_PP=128
$ export SANE_DEBUG_SANEI_PA4S2=128
$ scanimage -L

[sanei_debug] Setting debug level of mustek_pp to 128.
[mustek_pp] sane-mustek_pp, version 0.13-beta. build for SANE 1.0.15
[mustek_pp] backend by Jochen Eisinger <jochen.eisinger@gmx.net>
[sanei_debug] Setting debug level of sanei_pa4s2 to 128.
[sanei_pa4s2] sanei_pa4s2: interface called for the first time
[sanei_pa4s2] sanei_pa4s2_devices: invoked
[sanei_pa4s2] pa4s2_init: static int first_time = 1
[sanei_pa4s2] pa4s2_init: called for the first time
[sanei_pa4s2] pa4s2_init: initializing libieee1284
[sanei_pa4s2] pa4s2_init: 1 ports reported by IEEE 1284 library
[sanei_pa4s2] pa4s2_init: port 0 is `parport0`
[sanei_pa4s2] pa4s2_init: allocating port list
[sanei_pa4s2] pa4s2_init: initialized successfully
[mustek_pp] sanei_init: auto probing port
[sanei_pa4s2] sanei_pa4s2_open: called for device 'parport0'
[sanei_pa4s2] sanei_pa4s2_open: trying to connect to port
[sanei_pa4s2] pa4s2_open: trying to attach dev `parport0`
[sanei_pa4s2] pa4s2_init: static int first_time = 0
[sanei_pa4s2] pa4s2_init: sanei already initalized
[sanei_pa4s2] pa4s2_open: looking up port in list
[sanei_pa4s2] pa4s2_open: port is in list at port[0]
[sanei_pa4s2] pa4s2_open: setting up port data
[sanei_pa4s2] pa4s2_open: name=parport0 in_use=SANE_TRUE
[sanei_pa4s2] pa4s2_open: enabled=SANE_FALSE mode=PA4S2_MODE_NIB
[sanei_pa4s2] pa4s2_open: opening device
[sanei_pa4s2] pa4s2_open: device `parport0` opened...
[sanei_pa4s2] pa4s2_open: returning SANE_STATUS_GOOD
[sanei_pa4s2] pa4s2_open: open dev `parport0` as fd 0
[sanei_pa4s2] sanei_pa4s2_open: connected to device using fd 0
[sanei_pa4s2] sanei_pa4s2_open: checking for scanner
[sanei_pa4s2] sanei_pa4s2_enable: called for fd 0 with value 1
[sanei_pa4s2] sanei_pa4s2_enable: enable port 'parport0'
[sanei_pa4s2] pa4s2_enable: prelock[] = {0x18, 0x8f, 0x0c}
[sanei_pa4s2] sanei_pa4s2_enable: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_open: reading ASIC id
[sanei_pa4s2] sanei_pa4s2_readbegin: called for fd 0 and register 0
[sanei_pa4s2] sanei_pa4s2_readbegin: NIB readbegin
[sanei_pa4s2] pa4s2_readbegin_nib: selecting register 0 at 'parport0'
[sanei_pa4s2] sanei_pa4s2_readbegin: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_readbyte: called with fd 0
[sanei_pa4s2] sanei_pa4s2_readbyte: we hope, the backend called
[sanei_pa4s2] sanei_pa4s2_readbyte: readbegin, so the port is ok...
[sanei_pa4s2] sanei_pa4s2_readbyte: this means, I did not check it -
it's
[sanei_pa4s2] sanei_pa4s2_readbyte: not my fault, if your PC burns down.
[sanei_pa4s2] sanei_pa4s2_readbyte: read in NIB mode
[sanei_pa4s2] pa4s2_readbyte_nib: reading value 0xa5 from 'parport0'
[sanei_pa4s2] sanei_pa4s2_readbyte: read finished
[sanei_pa4s2] sanei_pa4s2_readbyte: got value 0xa5
[sanei_pa4s2] sanei_pa4s2_readbyte: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_readend: called for fd 0
[sanei_pa4s2] sanei_pa4s2_readend: we hope, the backend called
[sanei_pa4s2] sanei_pa4s2_readend: readbegin, so the port is ok...
[sanei_pa4s2] sanei_pa4s2_readend: this means, I did not check it - it's
[sanei_pa4s2] sanei_pa4s2_readend: not my fault, if your PC burns down.
[sanei_pa4s2] sanei_pa4s2_readend: NIB mode readend
[sanei_pa4s2] pa4s2_readend_nib: end of reading sequence for fd 0
[sanei_pa4s2] sanei_pa4s2_readend: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_open: detected ASIC id 1015
[sanei_pa4s2] sanei_pa4s2_enable: called for fd 0 with value 0
[sanei_pa4s2] sanei_pa4s2_enable: disable port 'parport0'
[sanei_pa4s2] pa4s2_disable: state restored
[sanei_pa4s2] sanei_pa4s2_enable: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_open: trying better modes
[sanei_pa4s2] sanei_pa4s2_open: trying mode 0
[sanei_pa4s2] sanei_pa4s2_enable: called for fd 0 with value 1
[sanei_pa4s2] sanei_pa4s2_enable: enable port 'parport0'
[sanei_pa4s2] pa4s2_enable: prelock[] = {0x18, 0x87, 0x0c}
[sanei_pa4s2] sanei_pa4s2_enable: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_readbegin: called for fd 0 and register 0
[sanei_pa4s2] sanei_pa4s2_readbegin: NIB readbegin
[sanei_pa4s2] pa4s2_readbegin_nib: selecting register 0 at 'parpo
[sanei_pa4s2] sanei_pa4s2_readbegin: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_readbyte: called with fd 0
[sanei_pa4s2] sanei_pa4s2_readbyte: we hope, the backend called
[sanei_pa4s2] sanei_pa4s2_readbyte: readbegin, so the port is ok...
[sanei_pa4s2] sanei_pa4s2_readbyte: this means, I did not check it -
it's
[sanei_pa4s2] sanei_pa4s2_readbyte: not my fault, if your PC burns down.
[sanei_pa4s2] sanei_pa4s2_readbyte: read in NIB mode
[sanei_pa4s2] pa4s2_readbyte_nib: reading value 0xa5 from 'parport0'
[sanei_pa4s2] sanei_pa4s2_readbyte: read finished
[sanei_pa4s2] sanei_pa4s2_readbyte: got value 0xa5
[sanei_pa4s2] sanei_pa4s2_readbyte: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_readend: called for fd 0
[sanei_pa4s2] sanei_pa4s2_readend: we hope, the backend called
[sanei_pa4s2] sanei_pa4s2_readend: readbegin, so the port is ok...
[sanei_pa4s2] sanei_pa4s2_readend: this means, I did not check it - it's
[sanei_pa4s2] sanei_pa4s2_readend: not my fault, if your PC burns down.
[sanei_pa4s2] sanei_pa4s2_readend: NIB mode readend
[sanei_pa4s2] pa4s2_readend_nib: end of reading sequence for fd 0
[sanei_pa4s2] sanei_pa4s2_readend: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_enable: called for fd 0 with value 0
[sanei_pa4s2] sanei_pa4s2_enable: disable port 'parport0'
[sanei_pa4s2] pa4s2_disable: state restored
[sanei_pa4s2] sanei_pa4s2_enable: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_open: mode works
[sanei_pa4s2] sanei_pa4s2_open: skipping mode UNI
[sanei_pa4s2] sanei_pa4s2_open: trying mode 2
[sanei_pa4s2] sanei_pa4s2_enable: called for fd 0 with value 1
[sanei_pa4s2] sanei_pa4s2_enable: enable port 'parport0'
[sanei_pa4s2] pa4s2_enable: prelock[] = {0x18, 0x87, 0x0c}
[sanei_pa4s2] sanei_pa4s2_enable: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_readbegin: called for fd 0 and register 0
[sanei_pa4s2] sanei_pa4s2_readbegin: EPP readbegin
[sanei_pa4s2] pa4s2_readbegin_epp: selecting register 0 at 'parport0'
[sanei_pa4s2] sanei_pa4s2_readbegin: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_readbyte: called with fd 0
[sanei_pa4s2] sanei_pa4s2_readbyte: we hope, the backend called
[sanei_pa4s2] sanei_pa4s2_readbyte: readbegin, so the port is ok...
[sanei_pa4s2] sanei_pa4s2_readbyte: this means, I did not check it -
it's
[sanei_pa4s2] sanei_pa4s2_readbyte: not my fault, if your PC burns down.
[sanei_pa4s2] sanei_pa4s2_readbyte: read in EPP mode
[sanei_pa4s2] pa4s2_readbyte_epp: reading value 0xa5 from 'parport0'
[sanei_pa4s2] sanei_pa4s2_readbyte: read finished
[sanei_pa4s2] sanei_pa4s2_readbyte: got value 0xa5
[sanei_pa4s2] sanei_pa4s2_readbyte: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_readend: called for fd 0
[sanei_pa4s2] sanei_pa4s2_readend: we hope, the backend called
[sanei_pa4s2] sanei_pa4s2_readend: readbegin, so the port is ok...
[sanei_pa4s2] sanei_pa4s2_readend: this means, I did not check it - it's
[sanei_pa4s2] sanei_pa4s2_readend: not my fault, if your PC burns down.
[sanei_pa4s2] sanei_pa4s2_readend: EPP mode readend
[sanei_pa4s2] pa4s2_readend_epp: end of reading sequence
[sanei_pa4s2] sanei_pa4s2_readend: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_enable: called for fd 0 with value 0
[sanei_pa4s2] sanei_pa4s2_enable: disable port 'parport0'
[sanei_pa4s2] pa4s2_disable: state restored
[sanei_pa4s2] sanei_pa4s2_enable: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_open: mode works
[sanei_pa4s2] sanei_pa4s2_open: using mode 2
[sanei_pa4s2] sanei_pa4s2_open: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_enable: called for fd 0 with value 1
[sanei_pa4s2] sanei_pa4s2_enable: enable port 'parport0'
[sanei_pa4s2] pa4s2_enable: prelock[] = {0xff, 0x8f, 0x0c}
[sanei_pa4s2] sanei_pa4s2_enable: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_readbegin: called for fd 0 and register 0
[sanei_pa4s2] sanei_pa4s2_readbegin: EPP readbegin
[sanei_pa4s2] pa4s2_readbegin_epp: selecting register 0 at 'parport0'
[sanei_pa4s2] sanei_pa4s2_readbegin: returning SANE_STATUS_GOOD
[sanei_pa4s2] sanei_pa4s2_readbyte: called with fd 0
[sanei_pa4s2] sanei_pa4s2_readbyte: we hope, the backend called
[sanei_pa4s2] sanei_pa4s2_readbyte: readbegin, so the port is ok...
[sanei_pa4s2] sanei_pa4s2_readbyte: this means, I did not check it -
it's
[sanei_pa4s2] sanei_pa4s2_readbyte: not my fault, if your PC burns down.
[sanei_pa4s2] sanei_pa4s2_readbyte: read in EPP mode