[sane-devel] trying Canon DR-5060-F

Wed Jan 5 14:58:11 UTC 2011

Oops... Sorry.

I'll make new tests for the multiple sheets and sizes too.

Christophe.

Le 05/01/2011 15:46, m. allan noah a écrit :
> If you wish to get multiple images, or use duplex, you must add the -b
> flag to scanimage. it will make multiple image files in the current
> directory. see the manpage for naming of files.
>
> if you wish to change the size of the scan, you must set the paper
> size, and then set the width and height of the image. see scanimage
> --help for list of options.
>
> allan
>
> On Wed, Jan 5, 2011 at 9:43 AM, Christophe Largeau (liste)
> <liste at alixen.fr>  wrote:
>> Ok for other tests based on the resolution.
>>
>> I've done more tests just "to see" :
>> - loading 2 A4 sheets on the scanner feeder =>  only one processed
>> - I've placed one A4 sheet in the feeder but in a landscape position : nice
>> try (no left or right side ;) )
>>
>> I also thought about the log of windows driver.
>>
>> Christophe.
>>
>> Le 05/01/2011 13:56, m. allan noah a écrit :
>>>
>>> Ok. Perhaps you can do some more tests in grayscale with sane, where
>>> you change something like resolution or the scan width each time. I
>>> want to make sure that gray works properly. If you find any problems,
>>> please send the logs and the command line you used.
>>>
>>> After that, I am afraid we will need to get another log of the windows
>>> driver, this time making a black&white scan.
>>>
>>> allan
>>>
>>> On Wed, Jan 5, 2011 at 5:50 AM, Christophe Largeau (liste)
>>> <liste at alixen.fr>    wrote:
>>>>
>>>> just done test7 (Lineart mode). The result is a black image (
>>>> http://dl.free.fr/bDipeF5mF
>>>>   )
>>>>
>>>> Christophe.
>>>>
>>>> Le 05/01/2011 09:23, Christophe Largeau (liste) a écrit :
>>>>>
>>>>> Great, it's working fine (see the test6.tar.gz at
>>>>> http://dl.free.fr/bGEgn9yFu )
>>>>>
>>>>> I'll make series of tests at other resolutions.
>>>>>
>>>>> Thanx.
>>>>>
>>>>> Le 04/01/2011 17:53, m. allan noah a écrit :
>>>>>>
>>>>>> ok- let us try again, slightly updated file.
>>>>>>
>>>>>> allan
>>>>>>
>>>>>> On Tue, Jan 4, 2011 at 11:26 AM, Christophe Largeau (liste)
>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> thank you for the new version.
>>>>>>>
>>>>>>> The scan is not exactly what it should be (see the file
>>>>>>> test5.tar.gz). The
>>>>>>> scanned image is not at the right position. Probably a shift problem.
>>>>>>>
>>>>>>> Note that for all the tests I've done it was a A4 paper and the Canon
>>>>>>> DR-5060-F is a A3 scanner.
>>>>>>>
>>>>>>> the file test5.tar.gz can be downloaded here :
>>>>>>> http://dl.free.fr/baKWwnrcy
>>>>>>>
>>>>>>> Christophe.
>>>>>>>
>>>>>>> Le 04/01/2011 16:23, m. allan noah a écrit :
>>>>>>>>
>>>>>>>> here is a new version of two files. use these to replace your
>>>>>>>> existing
>>>>>>>> copies, and recompile. This should contain all of your current fixes,
>>>>>>>> and it should (hopefully) produce proper grayscale scans.
>>>>>>>>
>>>>>>>> If you can test this also in lineart mode, it might need the same
>>>>>>>> width fix as grayscale...
>>>>>>>>
>>>>>>>> allan
>>>>>>>>
>>>>>>>> On Tue, Jan 4, 2011 at 4:33 AM, Christophe Largeau (liste)
>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>
>>>>>>>>> Thank you for the information, waiting for your fix.
>>>>>>>>>
>>>>>>>>> Christophe.
>>>>>>>>>
>>>>>>>>> Le 03/01/2011 20:03, m. allan noah a écrit :
>>>>>>>>>>
>>>>>>>>>> It appears that the corrupt image is because the scanner sends us
>>>>>>>>>> 1728
>>>>>>>>>> pixels per line, but we asked for only 1700. Likely this means that
>>>>>>>>>> the scanner is limited to image widths which are a multiple of 32
>>>>>>>>>> pixels. I will see if I can come up with a fix.
>>>>>>>>>>
>>>>>>>>>> allan
>>>>>>>>>>
>>>>>>>>>> On Mon, Jan 3, 2011 at 12:54 PM, m. allan noah<kitno455 at gmail.com>
>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>> jpg destroys too much image information. Any chance to can
>>>>>>>>>>> compress
>>>>>>>>>>> the pnm instead, and send that to me directly?
>>>>>>>>>>>
>>>>>>>>>>> allan
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Jan 3, 2011 at 12:11 PM, Christophe Largeau (liste)
>>>>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> OK,
>>>>>>>>>>>>
>>>>>>>>>>>> my A4 page (basically 0.5 millimeter squares) has been processed
>>>>>>>>>>>>
>>>>>>>>>>>> you can view the result here
>>>>>>>>>>>> http://i37.servimg.com/u/f37/15/57/48/39/test3p10.jpg : not
>>>>>>>>>>>> really the
>>>>>>>>>>>> expected result ;)
>>>>>>>>>>>>
>>>>>>>>>>>> You'll find the compressed test3.log attached to this message.
>>>>>>>>>>>>
>>>>>>>>>>>> Do you need other informations for ssm_df() and ssm_do()
>>>>>>>>>>>> debugging ?
>>>>>>>>>>>>
>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>
>>>>>>>>>>>> Le 03/01/2011 17:45, m. allan noah a écrit :
>>>>>>>>>>>>>
>>>>>>>>>>>>> Ah- same thing, this time also comment out ssm_df(). It would
>>>>>>>>>>>>> be nice
>>>>>>>>>>>>> to get those two commands working for your machine (if they are
>>>>>>>>>>>>> supported by the hardware), but they are not required for proper
>>>>>>>>>>>>> functioning.
>>>>>>>>>>>>>
>>>>>>>>>>>>> allan
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:40 AM, Christophe Largeau (liste)
>>>>>>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Here is the new test2.log ;)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Le 03/01/2011 17:31, m. allan noah a écrit :
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Excellent. set_window is now accepted by the scanner, but it
>>>>>>>>>>>>>>> does
>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>> like our ssm_do() call. So, edit canon_dr.c around line 3273,
>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>> comment out the call to ssm_do(). Then try again with test2 :)
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> change, recompile and test done.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> The test1pnm file is empty.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> The compressed test1.log is attached to this message.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Le 03/01/2011 16:50, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> ok- can you make some changes, recompile, and test?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> canon_dr.c in function set_window, around line 3615 comment
>>>>>>>>>>>>>>>>> out
>>>>>>>>>>>>>>>>> these
>>>>>>>>>>>>>>>>> lines:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> set_WD_brightness (desc1, s->brightness+128);
>>>>>>>>>>>>>>>>> set_WD_threshold (desc1, s->threshold);
>>>>>>>>>>>>>>>>> set_WD_contrast (desc1, s->contrast+128);
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Then compile, copy the library, and scan again, using this
>>>>>>>>>>>>>>>>> command:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode
>>>>>>>>>>>>>>>>> Gray
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> test1pnm 2>test1.log
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hopefully test1.pnm will contain an image. If not, compress
>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>>>> and send it to me.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan
>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Yes- I can see some set window data in it, though I am not
>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>>> complete. This sniffer program seems to miss some of the
>>>>>>>>>>>>>>>>>> data. I
>>>>>>>>>>>>>>>>>> will
>>>>>>>>>>>>>>>>>> look some more today.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> have you checked the log ? Is it helpful ?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a écrit :
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thank you.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Note that I'll be away until next monday.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 17:00, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Thanks. I'll look at it tonight.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> the trace.wsl file taken from the snifer is attached
>>>>>>>>>>>>>>>>>>>>>> to this
>>>>>>>>>>>>>>>>>>>>>> message.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:38, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> the sniffer utility:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> We need to use that to capture traffic of a
>>>>>>>>>>>>>>>>>>>>>>> low-resolution
>>>>>>>>>>>>>>>>>>>>>>> black
>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>> white
>>>>>>>>>>>>>>>>>>>>>>> scan.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> I cannot give more specific instructions, because I
>>>>>>>>>>>>>>>>>>>>>>> rarely
>>>>>>>>>>>>>>>>>>>>>>> use
>>>>>>>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>>>>>>>> program.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> I will replug the scsi card into the orignal windows
>>>>>>>>>>>>>>>>>>>>>>>> machine.
>>>>>>>>>>>>>>>>>>>>>>>> Do
>>>>>>>>>>>>>>>>>>>>>>>> you have
>>>>>>>>>>>>>>>>>>>>>>>> instruction for the log capture on windows ?
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> hmm- it is mad about something we ask it to do in
>>>>>>>>>>>>>>>>>>>>>>>>> the set
>>>>>>>>>>>>>>>>>>>>>>>>> window
>>>>>>>>>>>>>>>>>>>>>>>>> command. I don't have a protocol manual for this
>>>>>>>>>>>>>>>>>>>>>>>>> machine,
>>>>>>>>>>>>>>>>>>>>>>>>> so
>>>>>>>>>>>>>>>>>>>>>>>>> we
>>>>>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>>>>>> to guess what the problem is. Or, we have to try and
>>>>>>>>>>>>>>>>>>>>>>>>> capture a
>>>>>>>>>>>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>>>>>>>>>>>> from Windows driver. Can you use this machine on
>>>>>>>>>>>>>>>>>>>>>>>>> windows?
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> the new dr.log is attached to this message.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d
>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>> 2>dr.log>dr.pnm
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan
>>>>>>>>>>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> "scanimage: output is not a file, exiting"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.10
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners -- utilities
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The sane-find-scanner commands returns :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # result is different from what you expected,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> first
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # scanner is powered up and properly connected
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> computer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> supported by
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Try
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # No USB scanners found. If you expected
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> something
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> host
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> controller
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> setup
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> details.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Not checking for parallel port scanners.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Most Scanners connected to the parallel port
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> other
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> proprietary
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ports
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # can't be detected by this program.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wasn't
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> recognized
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thanks to this message :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> line
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1203.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> s->can_write_panel = 0;
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Then I replace the compiled versions of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.la
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great, but the scanner doesn't work :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to 30.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-backends
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1.0.21
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> attached,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> attaching
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr.conf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CANON
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> buffer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> size
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (2097152/524288)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....0.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 4e 4f
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 4e
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........CANON
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 30 37
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 011020010607
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0110
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 01 2c
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 01
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2c
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> c8
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....#.,.,..,.,..
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 13 ee
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0e
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .d............
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] standard options
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] AWD: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] High quality: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] grayscale: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] halftone: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] monochrome: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] overflow: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (8)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (6)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (9)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (7)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (6)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (8)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (7)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (9)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanimage: output is not a file, exiting
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Any idea ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel mailing list:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your_password"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Christophe Largeau
>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Christophe Largeau
>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>> --
>>>> Christophe Largeau
>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>
>>>
>>>
>>>
>>
>>
>> --
>> Christophe Largeau
>> Alixen 20 rue Jean Rostand 91 400 Orsay
>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>
>
>
>

-- 
Christophe Largeau
Alixen 20 rue Jean Rostand 91 400 Orsay
Tel : 01 60 19 72 31, Fax : 01 69 41 78 54