[Nut-upsuser] POWEREX VI 1000 LED

[Arnaud Quette]

Hi Sergey,

*** first, please keep the traffic on the list ***
ie, keep nut-upsuser copied of our discussion!

2011/7/19 Sergey Talchuk <tals1975 at gmail.com>

> Hi Arnaud,
>
> Sorry. My mistake.
>
> OB ups.status condition is handled correct (see attachment)
>

excellent, thanks.
I still see that you're using timers. Have you also tried reaching the low
battery (ups.status = OB LB) to trigger shutdown? Otherwise, please also
test this:
http://www.networkupstools.org/docs/user-manual.chunked/ar01s06.html#Shutdown_design

finally, I've just added an entry in the development version of the HCL
(r3140).
It will show up in the next release.

But I'm not sure about OL ups.status, since 'upsc powerex' output didn't
> give me anything like 'battery.charge=?'
>

check the blazer manpage for the solution:
http://www.networkupstools.org/docs/man/blazer.html

and more specially the "BATTERY CHARGE" section.

cheers,
Arnaud
-- 
Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20110719/4cddf949/attachment.html>
-------------- next part --------------
===
ON BATTERY

$ upsc powerex

battery.voltage: 26.50
battery.voltage.nominal: 24.0
beeper.status: enabled
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 5161
driver.parameter.subdriver: cypress
driver.parameter.vendorid: 0665
driver.version: 2.6.0
driver.version.internal: 0.03
input.current.nominal: 5.0
input.frequency: 50.1
input.frequency.nominal: 50
input.voltage: 7.4
input.voltage.fault: 7.4
input.voltage.nominal: 220
output.voltage: 220.4
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 12.0
ups.productid: 5161
ups.status: OB
ups.type: offline / line interactive
ups.vendorid: 0665
---

Jul 19 20:36:24 openSuSE blazer_usb[1444]: Startup successful
Jul 19 20:36:24 openSuSE upsd[1447]: listening on 127.0.0.1 port 3493
Jul 19 20:36:24 openSuSE upsd[1447]: Connected to UPS [powerex]: blazer_usb-powerex
Jul 19 20:36:24 openSuSE upsd[1448]: Startup successful
Jul 19 20:36:24 openSuSE upsmon[1451]: Startup successful
Jul 19 20:36:24 openSuSE upsd[1448]: User test at 127.0.0.1 logged into UPS [powerex]
Jul 19 20:37:24 openSuSE upsmon[1452]: UPS powerex at localhost on battery
Jul 19 20:37:24 openSuSE upssched[1458]: Timer daemon started
Jul 19 20:37:24 openSuSE upssched[1458]: New timer: onbatt1 (10 seconds)
Jul 19 20:37:24 openSuSE upssched[1458]: New timer: earlyshutdown (120 seconds)
Jul 19 20:37:34 openSuSE upssched[1458]: Event: onbatt1
Jul 19 20:37:34 openSuSE upssched-cmd: on battery. The UPS has been on battery for a while, logout right now!
Jul 19 20:39:24 openSuSE upssched[1458]: Event: earlyshutdown
Jul 19 20:39:24 openSuSE upssched-cmd: forced shutdown. UPS on battery too long, forced shutdown!
Jul 19 20:39:24 openSuSE upsmon[1452]: Signal 10: User requested FSD
Jul 19 20:39:24 openSuSE upsd[1448]: Client test at 127.0.0.1 set FSD on UPS [powerex]
Jul 19 20:39:24 openSuSE upsmon[1452]: Executing automatic power-fail shutdown
Jul 19 20:39:24 openSuSE upsmon[1452]: Auto logout and shutdown proceeding
Jul 19 20:39:29 openSuSE shutdown[1470]: shutting down for system halt
Jul 19 20:39:29 openSuSE init: Switching to runlevel: 0