[Nut-upsuser] KIN-1500AP RM + Windows 2008 64-bit Standard R2 SP1 (nut 2.6.1)

[Павел Гуменюк]

After adding COM1 I've got this:

c:\Program Files (x86)\NUT\bin>powercom.exe -DDD -a KIN1500
Network UPS Tools - PowerCom protocol UPS driver 0.13 (2.6.1-3057:3116M)
   0.000000     debug level is '3'
   0.000000     w32_serial_open (notUsed)
   0.000000     could not open notUsed

Unable to open notUsed: Operation not permitted

Things to try:

 - Check 'port=' in ups.conf

 - Check owner/permissions of all parts of path

   0.015600     Fatal error: unusable configuration

c:\Program Files (x86)\NUT\bin>powercom.exe -DDD -a KIN1500
Network UPS Tools - PowerCom protocol UPS driver 0.13 (2.6.1-3057:3116M)
   0.000000     debug level is '3'
   0.000000     w32_serial_open (COM1)
   0.015600     setting initial state on COM1
   0.015600     00000054 = w32_serial_open (COM1)
   0.015600     Warning: no locking method is available: No error [+яхЁрЎш
єёях
°эю чртхЁ°хэр. ]
   0.031200     vmin_ 0, vtime_ 0
   0.140400     action 0
   0.140400     vtime 0, vmin 1

   0.140400     ReadTotalTimeoutConstant -2, ReadIntervalTimeout -1,
ReadTotalTi
meoutMultiplier -1
   0.140400     DTR => 0, RTS => 1
   0.140400     Values of arguments:
   0.140400      manufacturer            : 'PowerCom'
   0.140400      model name              : 'Unknown'
   0.156000      serial number           : 'Unknown'
   0.156000      line voltage            : '230'
   0.156000      type                    : 'Trust'
   0.156000      number of bytes from UPS: '11'
   0.156000      method of flow control  : 'dtr0rts1'
   0.156000      validation sequence: '{{5,0},{7,0},{8,0}}'
   0.171600      shutdown arguments: '{{0,10},n}'
   0.171600      frequency calculation coefficients: '{0.000210,0.000209}'
   0.171600      load percentage calculation coefficients:
'{6.134300,-0.380800,
4.311000,0.181100}'
   0.171600      battery percentage calculation coefficients:
'{5.000000,0.32680
0,-825.000000,4.563900,-835.
820007}'
   0.187200      voltage calculation coefficients: '{0.954500,0.000000}'
   0.343200     data receiving error (validation check)
   0.343200     dstate_init: sock \\.\pipe\powercom-KIN1500 open on fd 100
   3.432006     data receiving error (0 instead of 11 bytes)
   6.442811     data receiving error (0 instead of 11 bytes)
   9.453616     data receiving error (0 instead of 11 bytes)
  12.464422     data receiving error (0 instead of 11 bytes)
  21.668438     data receiving error (0 instead of 11 bytes)
  24.679243     data receiving error (0 instead of 11 bytes)

c:\Program Files (x86)\NUT\bin>


2011/7/19 Павел Гуменюк <pavel.gumenyuk at gmail.com>

> I have only RS-232 on the box (meanwhile, it was manufactured on march of
> 2011)
> Here is my configs:
>
> nut.conf:
> *
> *
> MODE = netserver
>
>
> ups.conf:
> *
> *
> [KIN1500]
>        driver = powercom
>        port = notUsed
>        desc = "Powercom KING PRO KIN-1500AP RM"
>
>
>
> upsd.conf:
> *
> *
> LISTEN 192.168.1.2 3493
>
>
>
> upsd.users:
> *
> *
> [monuser]
>                password = xxxxxxxx
>                upsmon master
>
>
>
> upsmon.conf:
> *
> *
> MONITOR KIN1500 at 192.168.1.2 1 monuser xxxxxxxx master
> MINSUPPLIES 1
> SHUTDOWNCMD "C:\\WINDOWS\\system32\\shutdown.exe -s -t 0"
> NOTIFYCMD /sbin/upssched
> POLLFREQ 5
> POLLFREQALERT 5
> HOSTSYNC 15
> DEADTIME 15
> POWERDOWNFLAG "C:\\killpower"
> NOTIFYFLAG ONLINE SYSLOG+WALL+EXEC
> NOTIFYFLAG ONBATT SYSLOG+WALL+EXEC
> NOTIFYFLAG LOWBATT SYSLOG+WALL+EXEC
> RBWARNTIME 43200
> NOCOMMWARNTIME 300
> FINALDELAY 5
>
>
>
> upssched.conf:
> *
> *
> CMDSCRIPT /bin/upssched-cmd
> AT ONBATT * START-TIMER   onbattwarn 10
> AT ONLINE * CANCEL-TIMER  onbattwarn
> AT LOWBATT * EXECUTE      lowbattwarn
> AT ONBATT * START-TIMER   timeshutdown 100
> AT ONLINE * CANCEL-TIMER  timeshutdown
>
>
> After start I can see couple neutral events:
> upsd.exe - listening on 192.168.1.2 port 3493.
> upsd.exe - User monuser at 192.168.1.2 logged into UPS [KIN1500].
>
> Also, there are a lot of errors, such as "upsmon - Poll UPS [
> KIN1500 at 192.168.1.2] failed - Data stale."
> Anybody, please advise how to get it works.
> Thanks
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20110726/7d949f50/attachment.html>