[Nut-upsdev] help with TRIPP LITE SMART550USB

[julio sheinbaum]

don't know if I have to reply  to everyone, if  not apologies...
I can connect the ups to a laptop...would that help?
however at the moment can not unplug my Wk station from the ups
(do I have to do that?)
if you tell me how to proceed, can try later
thanks for the reply
julio

On 1/13/06, Charles Lepple <clepple at gmail.com> wrote:
>
> On 1/12/06, julio sheinbaum <jsheinbaum at gmail.com> wrote:
> >  Report Descriptor size = 52
> >  Report Descriptor: (200 bytes) => 06 A0 FF 09 01 A1 01 09 02 A1 00 06
> A1 FF
> > 09 03
>
> Hmm, I'm not sure why we have a mismatch here... they should both be 52,
> IIRC.
>
> >  Detected a UPS: TRIPP LITE/TRIPP LITE SMART550USB
> [...]
> >  Unknown protocol (2001)Attached to Tripp Lite SMART550USB
> >  send_cmd(msg_len=2, type='S')
> >  Unknown value for s[2]: 0x34
>
> The problem stems from the "Unknown protocol" message. All of the
> information in tripplite_usb is based on observation of units running
> under Windows, and you are the first one to try it with that protocol
> number.
>
> Are you interested in connecting the UPS to a Windows system for
> testing? You probably do not want the Windows system to be plugged
> into the UPS at the time, since you will need to discharge the battery
> so that we can see the on-battery and low-battery conditions.
>
> --
> - Charles Lepple
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20060113/7b0bb495/attachment.htm